+ Post new Ad
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 0
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 1
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 2
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 3
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 0
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 1
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 2
ARMSTRONG HEAVY DUTY MACHINISTS BENCH TABLE CLAMP 4" CAPACITY, US $1300 – Picture 3

Armstrong Heavy Duty Machinists Bench Table Clamp 4" Capacity

US $1300

  • Ellington, New York, United States
  • Jun 9th
Open on mobile:
QR code
  Armstrong Heavy Duty Machinists Bench / Table Clamp 4" Height / Throat Capacity 5/8" Bolt Hole Great Shape! USA No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made.  We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week (Monday thru Saturday).   We cannot issue shipping refunds after payment has been made!  To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice.   If you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds.   Buyer pays return shipping.   We do not cover original shipping cost.  We do not offer partial refunds.   Refunds will be given as money back. Items may be returned for any reason, complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.   Powered by SixBit's eCommerce Solution
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
UPC Does Not Apply

Directions

Similar products from Other Measuring & Monitoring Tools

MACHINIST EDGE FINDERS , STARRETT ,GENERAL , OTHERS , LOT OF 4

MACHINIST EDGE FINDERS , STARRETT ,GENERAL , OTHERS , LOT OF 4

  • Berlin, Connecticut, United States
  • Jun 9th
Starrett No. 270 Taper Gage

Starrett No. 270 Taper Gage

  • Athol, Massachusetts, United States
  • Jun 9th
Starrett No. 98-8 Machinist Level 8" with ground vial and cross test level

Starrett No. 98-8 Machinist Level 8" with ground vial and cross test level

  • Royersford, Pennsylvania, United States
  • Jun 9th
Sine Bar Brown & Sharpe 598-291-500

Sine Bar Brown & Sharpe 598-291-500

  • Gilbert, Arizona, United States
  • Jun 9th
Mahr EHE-116 Lever Heads (two) for Roundness machine

Mahr EHE-116 Lever Heads (two) for Roundness machine

  • Cave Creek, Arizona, United States
  • Jun 9th
STARRETT NO. 156 NO. 4 THREAD GAUGE GAGE Lot Of 2 lathe MACHINIST TOOLS

STARRETT NO. 156 NO. 4 THREAD GAUGE GAGE Lot Of 2 lathe MACHINIST TOOLS

  • Crystal Lake, Illinois, United States
  • Jun 9th
Vintage Machine Chart Decimal Equivalent, Fraction, Metric Pocket Cards & Scales

Vintage Machine Chart Decimal Equivalent, Fraction, Metric Pocket Cards & Scales

  • Saint Louis, Missouri, United States
  • Jun 9th
Starrett 98-8 Precision Machinist's 8" Level Very Nice Condition

Starrett 98-8 Precision Machinist's 8" Level Very Nice Condition

  • Smithville, Missouri, United States
  • Jun 9th
Angle blocks, for angles 10,15,30,5,4,3,2,1 slightly used, in wood box

Angle blocks, for angles 10,15,30,5,4,3,2,1 slightly used, in wood box

  • Rogers, Arkansas, United States
  • Jun 9th
1940 & 1943 James Derck's Gauge Dial Trigonometry Simplified Round Calculator

1940 & 1943 James Derck's Gauge Dial Trigonometry Simplified Round Calculator

  • Elburn, Illinois, United States
  • Jun 9th
L.S. Starrett T436XRL-3 Outside Micrometer 2-3" No. 436 USA

L.S. Starrett T436XRL-3 Outside Micrometer 2-3" No. 436 USA

  • Jenison, Michigan, United States
  • Jun 9th
Cooke, Troughton & Simms Ltd Engineers Precesion 12" Level [Starrett]

Cooke, Troughton & Simms Ltd Engineers Precesion 12" Level [Starrett]

  • Penfield, New York, United States
  • Jun 9th
Starret 20" Steel Beam Trammel C-251

Starret 20" Steel Beam Trammel C-251

  • Granite Bay, California, United States
  • Jun 9th
Proto Torque Wrench 6064A 40-200 in. lbs. 3/8" Drive

Proto Torque Wrench 6064A 40-200 in. lbs. 3/8" Drive

  • Spokane, Washington, United States
  • Jun 9th
Van Keuren 10" Optical Flat 2" inch thick

Van Keuren 10" Optical Flat 2" inch thick

  • Delta, British Columbia, Canada
  • Jun 9th
Philips 9421-170-28212 100kV High Voltage Industrial X-Ray Source Generator

Philips 9421-170-28212 100kV High Voltage Industrial X-Ray Source Generator

  • Milpitas, California, United States
  • Jun 9th
Draper 18" 45 cm height gage sn/ 8202070

Draper 18" 45 cm height gage sn/ 8202070

  • Montebello, California, United States
  • Jun 9th
FARO the most ADVANCED PORTABLE MEASUREMENT ARM

FARO the most ADVANCED PORTABLE MEASUREMENT ARM

  • Hollywood, Florida, United States
  • Jun 9th
Starrett No. 6 Thread Gauge Machinist Tool

Starrett No. 6 Thread Gauge Machinist Tool

  • Medford, Oregon, United States
  • Jun 9th
Mitutoyo Height Master 515-310N HM-12

Mitutoyo Height Master 515-310N HM-12

  • Quebec, Quebec, Canada
  • Jun 9th

People who viewed this item also vieved

CSE Caliper 43" 1/1000" in WOOD CASE MADE IN GERMANY

CSE Caliper 43" 1/1000" in WOOD CASE MADE IN GERMANY

  • Walled Lake, Michigan, United States
  • Jan 30th
Antique lot 3 CALIPER SCRIBE COMPASS MEASURE LAYOUT MACHINIST TOOL Hilger Boker

Antique lot 3 CALIPER SCRIBE COMPASS MEASURE LAYOUT MACHINIST TOOL Hilger Boker

  • Hampstead, Maryland, United States
  • Jan 30th
Renishaw A-5000-7629 Renishaw M2 Stylus

Renishaw A-5000-7629 Renishaw M2 Stylus

  • Waterford, Michigan, United States
  • Jan 30th
Hard Probe Set with Case

Hard Probe Set with Case

  • Waterford, Michigan, United States
  • Jan 30th
BROWN & SHARPE BESTEST .01MM TEST INDICATOR 7031-13

BROWN & SHARPE BESTEST .01MM TEST INDICATOR 7031-13

  • Rochester, New York, United States
  • Jan 30th
MUELLER .01MM DIAL TEST INDICATOR TYPE 302 - FREE SHIPPING

MUELLER .01MM DIAL TEST INDICATOR TYPE 302 - FREE SHIPPING

  • Rochester, New York, United States
  • Jan 30th
ACCELEROMETER SILICON DESIGNS LOW NOISE 2210-050 VIBRATION SENSOR BIN#J7-95

ACCELEROMETER SILICON DESIGNS LOW NOISE 2210-050 VIBRATION SENSOR BIN#J7-95

  • United States
  • Jan 30th
ACCELEROMETER KISTLER K-BEAM 8308A50 VIBRATION SENSOR AS IS BIN#J7-96

ACCELEROMETER KISTLER K-BEAM 8308A50 VIBRATION SENSOR AS IS BIN#J7-96

  • United States
  • Jan 30th
Starret micrometer 4"-5", 5"-6" & Lufkin 6"-7"

Starret micrometer 4"-5", 5"-6" & Lufkin 6"-7"

  • Norwalk, California, United States
  • Jan 30th
STARRETT 724 OUTSIDE MICROMETER 42-48 inch, Used in perfect condition

STARRETT 724 OUTSIDE MICROMETER 42-48 inch, Used in perfect condition

  • South El Monte, California, United States
  • Jan 30th
LUFKIN NO. 20-S STEEL RULES WITH HOLDER IN CASE MACHINIST AVIATION MECHANIC

LUFKIN NO. 20-S STEEL RULES WITH HOLDER IN CASE MACHINIST AVIATION MECHANIC

  • San Antonio, Texas, United States
  • Jan 30th
Shrink Rule - Pratt and Whitney - 1/10" to the foot shrink

Shrink Rule - Pratt and Whitney - 1/10" to the foot shrink

  • Tucson, Arizona, United States
  • Jan 30th
Starrett No.21 6"x4" Thin Square LOT BONUS: No. 603, No. 391, No. 330, Caliper

Starrett No.21 6"x4" Thin Square LOT BONUS: No. 603, No. 391, No. 330, Caliper

  • Denver, Colorado, United States
  • Feb 17th
Brown & Sharpe Combination Square-12"Rule,Protractor,Center,Square, Machinist

Brown & Sharpe Combination Square-12"Rule,Protractor,Center,Square, Machinist

  • Rehoboth, Massachusetts, United States
  • Feb 17th
Mighty Mag 400-1 Universal Magnetic Base USA for Dial/Test/Electronic Indicators

Mighty Mag 400-1 Universal Magnetic Base USA for Dial/Test/Electronic Indicators

  • Bridgeville, Pennsylvania, United States
  • Feb 21st
Madava Magnet Chuck; 6"; Plain back (CTAM# 7150)

Madava Magnet Chuck; 6"; Plain back (CTAM# 7150)

  • Sicklerville, New Jersey, United States
  • Feb 21st
NEW Chicago Brand 50213 4-Piece Combination Square Set

NEW Chicago Brand 50213 4-Piece Combination Square Set

  • United States
  • Mar 3rd
Starrett Universal Bevel Protractor No. C364FZ #51420

Starrett Universal Bevel Protractor No. C364FZ #51420

  • Cleveland, Ohio, United States
  • Mar 3rd
New 1pcs M6 x1.0 6H 2B PLUG THREAD GAGE GAUGE

New 1pcs M6 x1.0 6H 2B PLUG THREAD GAGE GAUGE

  • ShangHai, China
  • Mar 5th
M30 x 1 Right hand Thread Plug Gage Brand New

M30 x 1 Right hand Thread Plug Gage Brand New

  • HongKong, China
  • Mar 5th
Challenge 18"x 18" x 2" Surface Plate

Challenge 18"x 18" x 2" Surface Plate

  • DeKalb, Illinois, United States
  • Apr 23rd
GRANITE CHECK STAND SURFACE PLATE 6" x 6" x 2", 9/16" INSTRUMENT HOLE

GRANITE CHECK STAND SURFACE PLATE 6" x 6" x 2", 9/16" INSTRUMENT HOLE

  • Fox Lake, Illinois, United States
  • Apr 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies