as 837 for sale, brand-new and used.

Made for Dayton Electric Mfg. Co. This is a NEW Compressed Air Line Filter.

Made in the USA by Starrett. This is a Dial Test Indicator w/ Erick Magna Stand in good condition. Model #: 711 SPECIFICATIONS: Measuring Range: 0.030" Graduations: .001" Dial Reading: 0 - 15 - 0 Dial Diameter: .895" Overall Dimensions: 4" x 2-3/4" x 6-3/4" high Comes exactly as shown in pictures.

These are 2 used 5C Machinable Steps Collets in good condition. Specifications: Collet Style: 5C

Collets Made in the USA by Hardinge. These are 5C Square & Hex Block Fixtures w/ Lever Closer & 4 Hardinge Collets in good condition. SPECIFICATIONS: Spindle Taper: 5C Square & Hex Size: 1-3/4" Collet Sizes Included: 3/32", 5/32", 5/16", 1/2" Overall Lengths: 2-3/4" & 2-7/8" Comes exactly as shown in pictures.

Made in the USA by Hassay-Savage Co. This is a HS Keyway Broach in GREAT condition. Model #: 10212 SPECIFICATIONS: Keyway Size: 3/16" Overall Length: 7" Comes exactly as shown in pictures.

Made in the USA by Procunier. These are 6 Tap Collets for #2 Procunier Tapping Head in good condition. SPECIFICATIONS: Collet Sizes: (2) #6, #8, (2) #10, 1/4" Bushing Outside Diameters: 1/2" Overall Lengths: 1-1/2" Comes exactly as shown in pictures.

These are 3 Grinding Wheel Balancing Arbors in GREAT condition. SPECIFICATIONS: Arbor Diameters: 3/4" Arbor Lengths: 5" Tapered Ends: 1.090" to 1.694", 1.125" to 1.714", 1.140" to 1.750" Overall Lengths: 6-3/4" Comes exactly as shown in pictures. LOCAL PICKUP AVAILABLE!!!

Made in Germany by Albrecht. This is a Keyless Drill Chuck w/ CAT40 Shank in GREAT condition. SPECIFICATIONS: Capacity: 0 to 3/8" (1 to 10mm) Shank: CAT40 Projection: 5-1/4" Overall Length: 9-3/8" Comes exactly as shown in pictures.

Made in U.S.A by AW Tool Development Co. This is an Aluminum Miniature Quick Change Lathe Tool Post w/ 3 Holders in GREAT condition. Model #: BA-B SPECIFICATIONS: (1) AW BA-C: Cut-Off Blade Capacity: 1/2" wide x 1/16" thick (2) AW BA-FB: Capacity: 3/8"

Made by Kennametal. This is a TG100 Collet Chuck w/ CAT40 Shank. Model #: CV40HPTG100150M Specifications: Collet Type: TG100 Shank: CAT40 Projection: 5-5/8" Overall Length: 8-3/8" Comes exactly as shown in pictures.

Made by Kennametal Inc. This is a TG75 Collet Chuck w/ CAT40 Shank & 3 Collets in GREAT condition. Model #: CV40HPTG075150M SPECIFICATIONS: Collet Type: TG75 Collet Sizes: (2) 6MM & (1) 1/4" Shank: CAT40 Projection: 5-5/8" Overall Length: 8-1/2" Comes exactly as shown in pictures.

Surplus Management 311 BROYLES ST, SPARTA TN WE BUY AND SELL SURPLUS PER EBAY RULES : "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser.

Made in the USA by Brown & Sharpe Mfg. Co. This is a HSS Involute Gear Cutter w/ 1" Bore in good condition.

Made by Universal Engineering. These are 6 Assorted Tree Milling Machine "Z" Style Double Angle Collets in good condition. Part #: 55132 SPECIFICATIONS: Collet Sizes: 1/4", 5/16", 7/16", 1/2", 5/8", 3/4" Outside Diameters: 1-1/8" Overall Lengths: 1-1/2" Comes exactly as shown in pictures.

Made by UTD & Other. These are 2 HSS Involute Gear Cutters w/ 7/8" Arbor Holes in good condition. Model #s: #1-22 R 135 T TO RACK INVOLUTE HS-12 & #3-20 DP 35 TO 54T D+F.108 14 1/2 P.A.

Made by Universal Engineering. These are 5 Assorted Tree Milling Machine "Z" Style Double Angle Collets in good condition. Part #: 55132 SPECIFICATIONS: Collet Sizes: 3/16", 1/4", 3/8", 7/16", 1/2" Outside Diameters: 1-1/8" Overall Lengths: 1-1/2" Comes exactly as shown in pictures.

Made in the USA by Brown & Sharpe. These are 2 HSS Involute Gear Cutters w/ 7/8" Arbor Holes in good condition. Model #s: #4-28 DP 26 TO 3/4T D"+F .077" & #6-36 DP 17 TO 20T D"+F .060" SPECIFICATIONS: Diameters: 1-3/4" Arbor Holes: 7/8" Co