+ Post new Ad
Assorted Machinist Oil Stone Scherr Micrometer 123 Block Parallels Starrett #466, US $290 – Picture 0
Assorted Machinist Oil Stone Scherr Micrometer 123 Block Parallels Starrett #466, US $290 – Picture 0

Assorted Machinist Oil Stone Scherr Micrometer 123 Block Parallels Starrett #466

US $290

  • Landenberg, Pennsylvania, United States
  • Jul 30th
Open on mobile:
QR code
We have here a nice Assorted Machinist Oil Stone Scherr Micrometer 123 Block Parallels Starrett #466 Used....Some in good condition....Some in fair condition....See pictures! See pictures! Note: Of special interest, are two new Machinist 123 blocks....Still in the wrapper. New....new old stock....NOS. They will need cleaning....(Oil & maybe grease)....Purposely left this item in an uncleaned state. I know how particular some people are when cleaning items....I know the individual that gets this will do a slow and methodical cleaning job....much better than I could do.  Watch here for more $1.00 auctions like this....more coming. Sorry, this auction can't be combined with other shipments. See pictures.    Plenty of high resolution pictures are featured.   (If additional detail is required....the pictures may be copied and downloaded to your desktop. There they can be "zoomed-in on" if detail is required)   Allow $14.50 shipping to anywhere in the lower 48 States. Sorry, this auction can't be combined with other shipments.   Be sure to take a look at my other auctions....   This item is subject to prior sale.    Ships to USA only.
“Used....Some in good condition....Some in fair condition....See pictures!”
Featured Refinements Machinist Tools Lot
Brand Starrett Scherr Vermont
Country/Region of Manufacture United States

Directions

Similar products from Supporting Blocks & Sets

MACHINISTS RIGHT ANGLE BLOCK , 1-3/4 x 1 3/4 x 1-3/4"L

MACHINISTS RIGHT ANGLE BLOCK , 1-3/4 x 1 3/4 x 1-3/4"L

  • Prescott Valley, Arizona, United States
  • Jul 31st
3 Good TE-CO USA 40110 Machinist Metal Lathe Set Up Step Block 5-1/4" x 3-7/16"

3 Good TE-CO USA 40110 Machinist Metal Lathe Set Up Step Block 5-1/4" x 3-7/16"

  • Farwell, Michigan, United States
  • Jul 30th
5 Good Carr-Lane CL-60-BS Machinist Metal Lathe Set Up Step Blocks 5-5/8" Long

5 Good Carr-Lane CL-60-BS Machinist Metal Lathe Set Up Step Blocks 5-5/8" Long

  • Farwell, Michigan, United States
  • Jul 30th
8 No. 8 Tietzmann Tool Machinist Metal Lathe Set Up Step Blocks 3-3/4" x 2-1/2"

8 No. 8 Tietzmann Tool Machinist Metal Lathe Set Up Step Blocks 3-3/4" x 2-1/2"

  • Farwell, Michigan, United States
  • Jul 30th
2 No. 10 Tietzmann Tool Machinist Metal Lathe Set Up Step Blocks 7-3/8" x 4-7/8"

2 No. 10 Tietzmann Tool Machinist Metal Lathe Set Up Step Blocks 7-3/8" x 4-7/8"

  • Farwell, Michigan, United States
  • Jul 30th
4 5-S Northwestern Machinist Metal Lathe Set Up Step Blocks 3-7/8" x 2-3/8"

4 5-S Northwestern Machinist Metal Lathe Set Up Step Blocks 3-7/8" x 2-3/8"

  • Farwell, Michigan, United States
  • Jul 30th
MAGNA-LOCK MAGNETIC TRANSFER PARALLEL BLOCK 1-3/16" X 4" X 8"

MAGNA-LOCK MAGNETIC TRANSFER PARALLEL BLOCK 1-3/16" X 4" X 8"

  • Ellington, New York, United States
  • Jul 30th
V-Block Workholding Fixture Vee Machinist Tool Maker w/ Clamp

V-Block Workholding Fixture Vee Machinist Tool Maker w/ Clamp

  • Canyon Country, California, United States
  • Jul 30th
Pair Vintage Steel I-Beam Machinist Parallels with Holes

Pair Vintage Steel I-Beam Machinist Parallels with Holes

  • Seabrook, New Hampshire, United States
  • Jul 30th
Vintage Fowler V Block & Clamp Set No. 52-437-002

Vintage Fowler V Block & Clamp Set No. 52-437-002

  • Seabrook, New Hampshire, United States
  • Jul 30th
Global CNC Haas Mazak ID Tool Block 1.50" ID QT200-8435

Global CNC Haas Mazak ID Tool Block 1.50" ID QT200-8435

  • Venice, Florida, United States
  • Jul 30th
Preamer AP25 Adjustable Micro Angle Gauge High Precision Angle V Block 0-60° ...

Preamer AP25 Adjustable Micro Angle Gauge High Precision Angle V Block 0-60° ...

  • Phoenix, AZ, United States
  • Jul 30th
V BLOCK CLAMPS, Many Sizes

V BLOCK CLAMPS, Many Sizes

  • North Grosvenordale, Connecticut, United States
  • Jul 30th
3 6-S Northwestern Machinist Metal Lathe Set Up Step Blocks 5-7/8" x 3-3/8"

3 6-S Northwestern Machinist Metal Lathe Set Up Step Blocks 5-7/8" x 3-3/8"

  • Farwell, Michigan, United States
  • Jul 29th
7 TE-CO & No 3 Northwestern Aluminum Machinist Metal Lathe Set Up Step Blocks

7 TE-CO & No 3 Northwestern Aluminum Machinist Metal Lathe Set Up Step Blocks

  • Farwell, Michigan, United States
  • Jul 29th
V-block set w/clamps used

V-block set w/clamps used

  • Trout Creek, Montana, United States
  • Jul 29th
Good Used 6" x 6" x 6" Challenge L101 Machinist Set up Block Right Angle Block

Good Used 6" x 6" x 6" Challenge L101 Machinist Set up Block Right Angle Block

  • Farwell, Michigan, United States
  • Jul 29th
Vintage Machinists V Block Set with Bar Clamps

Vintage Machinists V Block Set with Bar Clamps

  • North Haven, Connecticut, United States
  • Jul 29th
Vintage Machinist Right Angle Square Setup Blocks (Pair2 )

Vintage Machinist Right Angle Square Setup Blocks (Pair2 )

  • North Haven, Connecticut, United States
  • Jul 29th
Brown & Sharpe 750-4 Permanent Magnetic V-Block Machinist Tool Unit+Wooden Box

Brown & Sharpe 750-4 Permanent Magnetic V-Block Machinist Tool Unit+Wooden Box

  • Fullerton, California, United States
  • Jul 29th

People who viewed this item also vieved

#3MT Dead Center

#3MT Dead Center

  • Lebanon, Tennessee, United States
  • Jan 30th
GLENZER Live Center PN- 558, AE-24-1-D, 16" long, Tapered

GLENZER Live Center PN- 558, AE-24-1-D, 16" long, Tapered

  • Warwick, New York, United States
  • Jan 30th
2 Royal Spring Type Live Center 4MT 10554

2 Royal Spring Type Live Center 4MT 10554

  • Naperville, Illinois, United States
  • Jan 30th
Kennametal FT15 FT 15 T-15 Torx wrenches 11 units in this sal new free shipping

Kennametal FT15 FT 15 T-15 Torx wrenches 11 units in this sal new free shipping

  • Avon, Massachusetts, United States
  • Jan 30th
large JACOBS no 36 CHUCK + key / arbor machinist drill

large JACOBS no 36 CHUCK + key / arbor machinist drill

  • Springfield, Missouri, United States
  • Jan 30th
Darex, Llc DA02105PF Left Hand Drill Chuck New Gen Drill Doctors

Darex, Llc DA02105PF Left Hand Drill Chuck New Gen Drill Doctors

  • United States
  • Jan 30th
Used Gedney C clamp conduit 3 1/2. Estate

Used Gedney C clamp conduit 3 1/2. Estate

  • Wolfeboro, New Hampshire, United States
  • Jan 30th
DE-STA-CO Toggle Clamps Vice Grip Clamps Aircraft Tools

DE-STA-CO Toggle Clamps Vice Grip Clamps Aircraft Tools

  • Stanwood, Washington, United States
  • Jan 30th
C-CLAMP 13" DEEP THROAT HEAVY DUTY- USED (CLAMP HEAD MISSING)

C-CLAMP 13" DEEP THROAT HEAVY DUTY- USED (CLAMP HEAD MISSING)

  • Lancaster, Kansas, United States
  • Jan 30th
Erickson Series 400 Collet Chuck

Erickson Series 400 Collet Chuck

  • Unionville, Pennsylvania, United States
  • Jan 30th
USED HARDINGE 2" 5C STEP CHUCK

USED HARDINGE 2" 5C STEP CHUCK

  • San Bernardino, California, United States
  • Jan 30th
Balas Collet Chuck

Balas Collet Chuck

  • Unionville, Pennsylvania, United States
  • Jan 30th
HARDINGE AHC-6 TURRET TOOL HOLDER X-337

HARDINGE AHC-6 TURRET TOOL HOLDER X-337

  • Terryville, Connecticut, United States
  • Jan 30th
7 Pcs. Techniks TG 100 Sealed Coolant Precision CNC Collet Set -750 PSI Coolant

7 Pcs. Techniks TG 100 Sealed Coolant Precision CNC Collet Set -750 PSI Coolant

  • Hamden, Connecticut, United States
  • Jan 30th
USED 1/16 HARDINGE 5C COLLET, WITH INTERNAL THREADS

USED 1/16 HARDINGE 5C COLLET, WITH INTERNAL THREADS

  • Pinellas Park, Florida, United States
  • Jan 30th
Angle Plate 14"x47-1/2", 14"Wx24"D Base, 2-5/8" Thickness, 3 Vert T-Slots(25823)

Angle Plate 14"x47-1/2", 14"Wx24"D Base, 2-5/8" Thickness, 3 Vert T-Slots(25823)

  • Cincinnati, Ohio, United States
  • Jan 30th
suburan magnetic sine plate

suburan magnetic sine plate

  • Dayton, Ohio, United States
  • Jan 30th
8-1/2" FACE PLATE LATHE CHUCK FACEPLATE W/ 1-1/2" - 8 MOUNT

8-1/2" FACE PLATE LATHE CHUCK FACEPLATE W/ 1-1/2" - 8 MOUNT

  • Chino, California, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Starrett Center Gage Gauge and Holder Stand # 392

MACHINIST TOOLS LATHE MILL Starrett Center Gage Gauge and Holder Stand # 392

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Starrett Pin Vise s for Pocher Model Making Etc

MACHINIST TOOLS LATHE MILL Starrett Pin Vise s for Pocher Model Making Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
BEAR Die and Mold Ejector Sleeve 1/4" x 3/8" x 9" <1911>

BEAR Die and Mold Ejector Sleeve 1/4" x 3/8" x 9" <1911>

  • Saint Louis, Missouri, United States
  • Jan 30th
McMahon Machinist Swivel Table Type AB #2

McMahon Machinist Swivel Table Type AB #2

  • Wheatland, Pennsylvania, United States
  • Jan 30th
Brand New 4&#034; Mini Rotary Table - Milling Machines - Best Quality Tools And Parts

Brand New 4" Mini Rotary Table - Milling Machines - Best Quality Tools And Parts

  • New Delhi, India
  • Jan 30th
MOORE 10&#034; ROTARY TABLE JIG BORER MILLING MACHINE and clamps

MOORE 10" ROTARY TABLE JIG BORER MILLING MACHINE and clamps

  • Plymouth, Michigan, United States
  • Jan 30th
CNC Machine Vise Great Condition

CNC Machine Vise Great Condition

  • Oxnard, California, United States
  • Jan 30th
CNC Machine Double Vise Great Condition Horizontal

CNC Machine Double Vise Great Condition Horizontal

  • Oxnard, California, United States
  • Jan 30th
Wilton Bench Vise Model 161072-10 Quick Release Screw Vise

Wilton Bench Vise Model 161072-10 Quick Release Screw Vise

  • Paramount, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies