Athletic Poly Plastisol Ink - 5 Gallon-white

US $570

  • Hackensack, New Jersey, United States
  • May 26th
Athletic Poly Plastisol Ink Phthalate Free, Highly pigmented Superb Opaque for dark-colored backgrounds Best for printing on most bleed-prone textile substrates In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP) STOCK, END-USE: Cotton, 50/50 cotton/polyester blends, and some synthetics. DESCRIPTION: Athletic Poly Plastisol Ink/PF-ATH Series is popularized for its strongest Bleed Resistant characteristics on dark-colored or bleed-prone textiles. It assures non-migration of fabric dye into the print and leaves a very high opaque, soft-hand finish. Athletic Poly Plastisol Ink/PF-ATH Series is ready-to-use straight from the container. Important Note: Always store Athletic Poly Plastisol Ink container with lid on to ensure consistently smooth viscosity. Note: Pre-test on actual substrate before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects. FINISH: Durable, soft-hand finish. COLORS: Available low-bleed opaque colors; formulated using non-leaded pigments. SCREEN FABRIC: Mesh counts up to 160 mono filament polyester (64T European Mesh). STENCIL: Dual-sensitized direct. MODIFICATIONS: In situations where bleed resistance and opacity is not crucial, extend with PF-GP 081 Clear Extender Base for longer ink mileage. To reduce ink viscosity with RE703 or RE704, add 1-5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE705 can be added up to 5-10% (by weight of ink) if Bleed Resistance, Opacity, or color shade, is not crucial. SQUEEGEE: When printing textiles, use a medium hard (65-75 durometer) squeegee. STORAGE: Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings. PACKAGING: 1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters) SAFETY & HANDLING: Refer to Material Safety Date Sheet (MSDS) for complete information. WASH UP SOLVENT: T-125 Wash up or equivalent / SC-510 Bio. Wash up. (Non-Petrochemical) MODIFIERS: PF-GP081 – Clear Extender Base / RE703 – Quick Flash Reducer / RE704 – Clear Reducer / RE705 – Curable Reducer COLOR RANGE: All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!

Directions

Similar products from Printing Ink & Electroink

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies