ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 0

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 1

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 2

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 3

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 4

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 5

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 6

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 7

ATLAS COPCO TENSOR DS7 ASSEMBLY SYSTEM with ETV DS7-40-10S & Speed controller, US $3,250.00 – Picture 8

Atlas Copco Tensor Ds7 Assembly System With Etv Ds7-40-10s & Speed Controller

US $3,250.00

Centreville, Virginia, United States
Feb 12th

Open on mobile:
QR code

Atlas Copco Tensor DS Drive D311-DS7 Advance controller system with ETV DS7-40-10S Electric Nutrunner & Speed controller Type DS311-DS7, 8433 0812 33 100-120, 220-240VAC , 200W 50-60Hz 25A "Tensor DS electric screwdrivers have been developed to give you the benefits of controlled tightening and advanced electric systems throughout your assembly operations. Their simplicity, reliability, outstanding flexibility and accuracy, can significantly reduce your assembly costs and improve overall productivity. For quality critical applications, the Tensor DS series have a proven track record in many industries, including aerospace, automotive, construction, white goods and electronics. Elimination of assembly problems through its control and monitoring functionality, Tensor DS will bring you closer to zero-fault production. By alerting the operator to the most common errors before they continue down the line, the system ensures high-quality end products, and saves you a fortune in reworking costs. Tensor DL's high speed and power improves productivity by shortening cycle times. The controller calculates and monitors torque through the highly accurate DigiTork algorithm. The tools are equipped with angle encoders monitoring the rundown angle as well as the tightening angle. Combining torque and angle monitoring you will detect if something is wrong with the joint, guaranteeing quality." Features & benefits Batch count, cross thread and rehit detection to increase quality during assembly process Quick programming function to reduce set up time Tool service indicator to alarm user when tool should stop for maintenance, reducing costs compared to run-to-fail maintenance Autoset function for helping user to set up tool Two stage/quick step/ergoramp tightening strategies to increase tightening quality Torque control and angle monitoring to detect if joint is properly tightened increases assembly quality Rundown angle, step tap and PVT monitoring to increase tightening quality RS232 port for programming Discrete I/O for communication with line Remote start for fixture application Up to 10 different torque settings make it possible to use the same tool for several applications, reducing operating costs and allowing a cleaner design of the work area Supports QIF (error proofing modules) connectivity such as socket selectors for easy installation in demanding error proofing applications Line control function for interaction with line, increasing error proofing in the assembly process The Tensor DS electric Nutrunner is used for quality critical applications not requiring traceable measured torque value. The Nutrunner Tensor DS offers major productivity and quality gains compared with conventional tooling. Features & benefits Non-transducer zed The low torque series is ideal for hand-held bench assembly and the high torque tools are well suited for fixture applications ETV DS7-40-10S Nutrunner Technical data Technical Specifications Model type Angle Speed 1315 r/min Weight 2.5 lb Torque range 1.5 - 3.6 ft lb Square drive 3/8 inch Length 380 mm CS distance 28 mm Spline/Mounting – / 1 Sound standard ISO15744 Sound pressure <70 dB(A) Units: Metric Imperial Technical Specifications Model type Straight Speed 1315 r/min Weight 1.1 kg Torque range 2 - 5 Nm Square drive 9.53 mm Length 380 mm CS distance 28 mm Spline/Mounting – / 1 Sound standard ISO15744 Sound pressure <70 dB(A) Comes with Operations Manual & Power cord

Condition:	New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...	Brand	Atlas Copco
MPN	Atlas CopcoTensor DS7, ETV DS7-40-10S
Model	D311-DS7, 8433081233, ETV-DS7-40-10S
Country/Region of Manufacture	Sweden