+ Post new Ad
Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A, US $19.95 – Picture 0
Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A, US $19.95 – Picture 1
Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A, US $19.95 – Picture 2
Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A, US $19.95 – Picture 0
Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A, US $19.95 – Picture 1
Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A, US $19.95 – Picture 2

Atlas Metal Lathe Change Gears, Used, For 10 And 12 Inch ,9-101-44a

US $19.95

  • Williamston, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
Part number 9-101-44A change gear You are buying  one gear however I have 3 of these for sale,all in the same great condition. Up for sale are some left over change gears that were not required to rebuild my commercial 12 lathe.  I have cleaned and inspected all the gears,scrapped the bad ones, and I am selling the good ones as USED however most of them look like they are new and unused as many have no signs of wear.  Also the change gear bushing is a tight snug fit. There are no missing teeth or cracked teeth.  The gear face is 3/8 thick and the gear boss is 1/2 thick. Please look at the photos as they tell the condition of the gears and are part of the description.NO RETURNS NO international sales or bidding FREE SHIPPING,  Ships cheapest way to lower 48 states ONLY. If you need faster shipping tell me BEFORE you pay and I will send an invoice.  For faster shipping there will be a $3 dollar handling fee for a small flat rate box.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture Unknown
MPN 9-101-44A
Brand Atlas

Directions

Similar products from Tools for Lathe Machines

SLIDE HAMMER MACHINIST MADE VERY NICE

SLIDE HAMMER MACHINIST MADE VERY NICE

  • Wappingers Falls, New York, United States
  • Jan 30th
LOT of TWO - 2 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

LOT of TWO - 2 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

  • Milroy, Indiana, United States
  • Jan 30th
LOT of TWO - 3 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

LOT of TWO - 3 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

  • Milroy, Indiana, United States
  • Jan 30th
LOT of TWO - 4 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

LOT of TWO - 4 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

  • Milroy, Indiana, United States
  • Jan 30th
HEAVY DUTY 11" T-SLOT FACE PLATE W D1-3 CAMLOCK MOUNT

HEAVY DUTY 11" T-SLOT FACE PLATE W D1-3 CAMLOCK MOUNT

  • Ellington, New York, United States
  • Jan 30th
ATLAS CRAFTSMAN COMMERCIAL 12 " lathe COVER GUARD BRACKET 3986

ATLAS CRAFTSMAN COMMERCIAL 12 " lathe COVER GUARD BRACKET 3986

  • Williamston, Michigan, United States
  • Jan 30th
4 1/2 MORSE TAPER SPINDLE NOSE COLLET ADAPTER lathe tool holder adapter

4 1/2 MORSE TAPER SPINDLE NOSE COLLET ADAPTER lathe tool holder adapter

  • Milroy, Indiana, United States
  • Jan 30th
HEAVY DUTY 7-1/2" DOG DRIVING FACE PLATE W/ 3-1/2" 5 THREADED MOUNT

HEAVY DUTY 7-1/2" DOG DRIVING FACE PLATE W/ 3-1/2" 5 THREADED MOUNT

  • Ellington, New York, United States
  • Jan 30th
LOGAN LATHE GEAR COVER 13H X 8W TOP TO9 1/2 BOTTOM 3 IN ID

LOGAN LATHE GEAR COVER 13H X 8W TOP TO9 1/2 BOTTOM 3 IN ID

  • Plantsville, Connecticut, United States
  • Jan 30th
New Sumitomo 40mm 1.6" Indexable Carbide Insert Lathe Tool Holder BNR16-12

New Sumitomo 40mm 1.6" Indexable Carbide Insert Lathe Tool Holder BNR16-12

  • San Tan Valley, Arizona, United States
  • Jan 30th
BUCK 4" 3 JAW SCROLLING CHUCK W/ FLAT BACK MODEL 1434

BUCK 4" 3 JAW SCROLLING CHUCK W/ FLAT BACK MODEL 1434

  • Ellington, New York, United States
  • Jan 30th
RIGIBORE BORING UNIT #TR5A245 BRAND NEW*

RIGIBORE BORING UNIT #TR5A245 BRAND NEW*

  • Oxford, Mississippi, United States
  • Jan 30th
Original Atlas Craftsman 6” Lathe Milling Attachment M6-501 Vise & instructions

Original Atlas Craftsman 6” Lathe Milling Attachment M6-501 Vise & instructions

  • Glide, Oregon, United States
  • Jan 30th
Hitachi Seiki live tooling V30M-X

Hitachi Seiki live tooling V30M-X

  • Groveland, Massachusetts, United States
  • Jan 30th
Hitachi Seiki live tooling V30M-Z

Hitachi Seiki live tooling V30M-Z

  • Groveland, Massachusetts, United States
  • Jan 30th
MANCHESTER CUT OFF BLADE HOLDER MODEL T100 ST 10 LH

MANCHESTER CUT OFF BLADE HOLDER MODEL T100 ST 10 LH

  • Ellington, New York, United States
  • Jan 30th
SET OF 4 ARMSTRONG QUICK CHANGE TOOL HOLDERS ALORIS CXA COMPATIBLE

SET OF 4 ARMSTRONG QUICK CHANGE TOOL HOLDERS ALORIS CXA COMPATIBLE

  • Ellington, New York, United States
  • Jan 30th
SUPER PRECISION BXA STYLE QUICK CHANGE TOOL POST

SUPER PRECISION BXA STYLE QUICK CHANGE TOOL POST

  • Ellington, New York, United States
  • Jan 30th
ALORIS QUICK CHANGE UNIVERSAL PARTING BLADE TOOL HOLDER MODEL AXA 7

ALORIS QUICK CHANGE UNIVERSAL PARTING BLADE TOOL HOLDER MODEL AXA 7

  • Ellington, New York, United States
  • Jan 30th
KDK QUICK CHANGE BORING BAR TOOL HOLDER MODEL 155P 1-1/4" CAPACITY

KDK QUICK CHANGE BORING BAR TOOL HOLDER MODEL 155P 1-1/4" CAPACITY

  • Ellington, New York, United States
  • Jan 30th

People who viewed this item also vieved

#8520 CLAUSING Vertical Mill With Single Phase Motor

#8520 CLAUSING Vertical Mill With Single Phase Motor

  • Hauppauge, New York, United States
  • May 15th
45-Tool Magazine From Functioning Cincinnati Milacron T-10

45-Tool Magazine From Functioning Cincinnati Milacron T-10

  • Warfordsburg, Pennsylvania, United States
  • May 16th
Superior cincinnatic collet pads for TURNING

Superior cincinnatic collet pads for TURNING

  • Kenosha, Wisconsin, United States
  • May 16th
Rapid-Air Powered Coil Reel, Model #RX3A-154

Rapid-Air Powered Coil Reel, Model #RX3A-154

  • Paso Robles, California, United States
  • May 25th
Bobst SP 102 Diecutting Chase (Removable Bottom Plate) BSA03200000BP

Bobst SP 102 Diecutting Chase (Removable Bottom Plate) BSA03200000BP

  • Conway, Arkansas, United States
  • May 25th
Bobst 1420 Bottom cutting chase BSA0570001947

Bobst 1420 Bottom cutting chase BSA0570001947

  • Conway, Arkansas, United States
  • May 25th
GRINDING SPINDLE - BELT DRIVE DUMORE PARKER MAJESTIC DECKEL BELT DRIVE COLLET

GRINDING SPINDLE - BELT DRIVE DUMORE PARKER MAJESTIC DECKEL BELT DRIVE COLLET

  • Ortonville, Michigan, United States
  • May 25th
Threadwell Tangi-Matic radius &angle grinding wheel dresser

Threadwell Tangi-Matic radius &angle grinding wheel dresser

  • Brooklyn, New York, United States
  • May 25th
Collis #2 morse taper drill drivers,automotive tang positive drive drill

Collis #2 morse taper drill drivers,automotive tang positive drive drill

  • Granger, Indiana, United States
  • May 26th
Sugino Selfeeder Newtric Auto Feed Drill Tap

Sugino Selfeeder Newtric Auto Feed Drill Tap

  • Webster, Florida, United States
  • May 26th
Zagar Drilling Tapping Jig Head

Zagar Drilling Tapping Jig Head

  • Webster, Florida, United States
  • May 26th
Ingersoll Rand Vertical sander 99V60P107 6,000 RPM

Ingersoll Rand Vertical sander 99V60P107 6,000 RPM

  • Portland, Oregon, United States
  • May 27th
SET OF LETTER STAMPS 1/8" W\1/4" SHANK

SET OF LETTER STAMPS 1/8" W\1/4" SHANK

  • Ellington, New York, United States
  • May 28th
TRUMPF TKFB-100 PLATE BEVELER BEVELING MACHINE TKFB100 FREE SHIP

TRUMPF TKFB-100 PLATE BEVELER BEVELING MACHINE TKFB100 FREE SHIP

  • Canoga Park, California, United States
  • May 28th
Interface Load cell 1923 Oil well 50k

Interface Load cell 1923 Oil well 50k

  • Billings, Montana, United States
  • May 28th
HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.013 Inch Thick, 1/2 Inch Hole, 90

HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.013 Inch Thick, 1/2 Inch Hole, 90

  • Milwaukee, Wisconsin, United States
  • May 28th
• HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.010 Inch Thick, 5/8 Inch Hole,

• HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.010 Inch Thick, 5/8 Inch Hole,

  • Milwaukee, Wisconsin, United States
  • May 28th
HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.012 Inch Thick, 5/8 Inch Hole, 90

HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.012 Inch Thick, 5/8 Inch Hole, 90

  • Milwaukee, Wisconsin, United States
  • May 28th
MITSUBISHI CX (AF3) WIRE EDM CUTTER UNIT X058D186G51 WM502 NEW!

MITSUBISHI CX (AF3) WIRE EDM CUTTER UNIT X058D186G51 WM502 NEW!

  • Broadview Heights, Ohio, United States
  • May 29th
Charmilles large motor BBC YASKAWA

Charmilles large motor BBC YASKAWA

  • Anoka, Minnesota, United States
  • May 29th
Charmilles small motor YASKAWA BBC

Charmilles small motor YASKAWA BBC

  • Anoka, Minnesota, United States
  • May 29th
ENGINE CYLINDER HONE KIT - 45 TO 65 MM HONING MACHINE + HONING STONES BRAND NEW

ENGINE CYLINDER HONE KIT - 45 TO 65 MM HONING MACHINE + HONING STONES BRAND NEW

  • DELHI, DELHI, India
  • May 30th
ENGINE CYLINDER HONE KIT - 50 TO 75 MM HONING MACHINE + HONING STONES HI QUALITY

ENGINE CYLINDER HONE KIT - 50 TO 75 MM HONING MACHINE + HONING STONES HI QUALITY

  • DELHI, DELHI, India
  • May 30th
TOP QUALITY 44MM VALVE SEAT GRINDER STONE SUITABLE FOR SIOUX BRAND NEW

TOP QUALITY 44MM VALVE SEAT GRINDER STONE SUITABLE FOR SIOUX BRAND NEW

  • DELHI, DELHI, India
  • May 30th
hardinge type tool holders 3 pieces

hardinge type tool holders 3 pieces

  • Gardena, California, United States
  • Jun 2nd
hardinge assorted tool holders

hardinge assorted tool holders

  • Gardena, California, United States
  • Jun 2nd
Wickman 2 1/4 + Pietro Cucchi 4mt

Wickman 2 1/4 + Pietro Cucchi 4mt

  • Coventry, United Kingdom
  • Jun 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies