+ Post new Ad
Atlas Welding Turn Table Model XT-200, US $1,350.00 – Picture 0
Atlas Welding Turn Table Model XT-200, US $1,350.00 – Picture 0

Atlas Welding Turn Table Model Xt-200

US $1,350.00

  • Milpitas, California, United States
  • Jul 2nd
Open on mobile:
QR code
The machine includes the following: 1x Chuck 1x Set of Jaws 1x T handle  1x Ground Clamp This turn table has been used a couple of times and it was sitting on a shelf for long time without any use and it is ready to be put back into service again 
“The equipment have some dinks, scratches and some worn-down paint. However the machine is in perfect working condition.”
Operation Welding
Brand Atlas
MPN 9988

Directions

Similar products from Rotating Tables

65mm 3 Jaw Self Centering Lathe Chuck for Rotary Table + 2 Handles PREMIUM

65mm 3 Jaw Self Centering Lathe Chuck for Rotary Table + 2 Handles PREMIUM

  • DELHI, DELHI, India
  • Jul 3rd
SIP Hauser jig grinder collets 10 ps. 3MM -8MM & 1/8" - 3/8"

SIP Hauser jig grinder collets 10 ps. 3MM -8MM & 1/8" - 3/8"

  • Addison, Illinois, United States
  • Jul 3rd
3" /75 mm ROTARY TABLE H / V WITH ROUND VICE VISE & FIXING T-NUTS BOLTS

3" /75 mm ROTARY TABLE H / V WITH ROUND VICE VISE & FIXING T-NUTS BOLTS

  • DELHI, DELHI, India
  • Jul 3rd
HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Lathe Machine tool

HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Lathe Machine tool

  • DELHI, DELHI, India
  • Jul 3rd
Precise ER 16 Collet Adaptor & T-nuts for 3"/ 4" Rotary Tables Machine tool

Precise ER 16 Collet Adaptor & T-nuts for 3"/ 4" Rotary Tables Machine tool

  • DELHI, DELHI, India
  • Jul 3rd
Ellis Dividing Head

Ellis Dividing Head

  • Edgewater, Maryland, United States
  • Jul 3rd
Tormach Kress 800 Watt High Speed Spindle Kit

Tormach Kress 800 Watt High Speed Spindle Kit

  • Indianapolis, Indiana, United States
  • Jul 3rd
Dividing Head Tailstock (CTAM #7706)

Dividing Head Tailstock (CTAM #7706)

  • Sicklerville, New Jersey, United States
  • Jul 2nd
Rotary Table Tilting 4" /100mm With 65mm Self Centering Lathe Chuck & Back Plate

Rotary Table Tilting 4" /100mm With 65mm Self Centering Lathe Chuck & Back Plate

  • DELHI, DELHI, India
  • Jul 2nd
used snap-on 5 inch table vice

used snap-on 5 inch table vice

  • Chicago, Illinois, United States
  • Jul 2nd
Center Square Finder 3 Inches Round Bar Finder Head Dia SPI 3/8 Inchs Double End

Center Square Finder 3 Inches Round Bar Finder Head Dia SPI 3/8 Inchs Double End

  • DELHI, DELHI, India
  • Jul 1st
YUASA 12" Horizontal Rotary Table Machinist Lathe Mill Tool No Dial PICKUP in MA

YUASA 12" Horizontal Rotary Table Machinist Lathe Mill Tool No Dial PICKUP in MA

  • Brockton, Massachusetts, United States
  • Jul 1st
TROYKE U-12 Horizontal & Vertical Precision Rotary Table - 12" Table Top

TROYKE U-12 Horizontal & Vertical Precision Rotary Table - 12" Table Top

  • Strafford, New Hampshire, United States
  • Jul 1st
2004 Haas HRT160 4th Axis Programmable CNC Rotary Table Sigma-1 Motor 6" platter

2004 Haas HRT160 4th Axis Programmable CNC Rotary Table Sigma-1 Motor 6" platter

  • Minneapolis, Minnesota, United States
  • Jul 1st
2004 Haas HRT160 Sigma 1 Motor CNC 4th Axis Programmable Rotary Table 6" SHRT160

2004 Haas HRT160 Sigma 1 Motor CNC 4th Axis Programmable Rotary Table 6" SHRT160

  • Minneapolis, Minnesota, United States
  • Jul 1st
2016 Haas TR-310 5-Axis Trunnion

2016 Haas TR-310 5-Axis Trunnion

  • FL, United States
  • Jun 30th
Machinist Milling Table Drill Press Vise 7" Cross Slide Rotary Table

Machinist Milling Table Drill Press Vise 7" Cross Slide Rotary Table

  • Mount Holly, North Carolina, United States
  • Jun 30th
Craftsman (Palmgren?) 8" X Y Cross Slide Rotary table With Vise

Craftsman (Palmgren?) 8" X Y Cross Slide Rotary table With Vise

  • Uxbridge, Massachusetts, United States
  • Jun 29th
VINTAGE CRAFTSMAN PALMGREN ROTARY TABLE JAW SET MACHINIST TOOLING

VINTAGE CRAFTSMAN PALMGREN ROTARY TABLE JAW SET MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jun 28th
Rotary Table 3" 80mm Horizontal Vertical Low Profile With Single Bolt Tailstock

Rotary Table 3" 80mm Horizontal Vertical Low Profile With Single Bolt Tailstock

  • DELHI, DELHI, India
  • Jun 28th

People who viewed this item also vieved

No Name Right Angle Block - 4-1/4" Wide with 3-1/2" Leg and 4-5/8" Leg

No Name Right Angle Block - 4-1/4" Wide with 3-1/2" Leg and 4-5/8" Leg

  • Clear Lake, Minnesota, United States
  • Jan 30th
Machinist Set-up V Block 6" x 4" x 3 1/8" Good condition. Unique

Machinist Set-up V Block 6" x 4" x 3 1/8" Good condition. Unique

  • DeKalb, Illinois, United States
  • Jan 30th
RARE 90-DEGREE CLAMP / ELBOW CLAMP MACHINIST TOOL - 1/4" TUBING,PIPE,CABLE,HOSE

RARE 90-DEGREE CLAMP / ELBOW CLAMP MACHINIST TOOL - 1/4" TUBING,PIPE,CABLE,HOSE

  • Albuquerque, New Mexico, United States
  • Jan 30th
Jarno 14 Taper Lathe Dead Center Set Of 2

Jarno 14 Taper Lathe Dead Center Set Of 2

  • United States
  • Jan 30th
Jarno 14 Taper Bullnose Carbide Tip Lathe Dead Center

Jarno 14 Taper Bullnose Carbide Tip Lathe Dead Center

  • United States
  • Jan 30th
Jarno #16 Taper Carbide Tip Lathe Dead Center

Jarno #16 Taper Carbide Tip Lathe Dead Center

  • United States
  • Jan 30th
JACOBS RUBBER FLEX SPINDLE NOSE CHUCK W/ COLLETS L00 MOUNT

JACOBS RUBBER FLEX SPINDLE NOSE CHUCK W/ COLLETS L00 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
machinist tool,5" 3 jaw scroll chuck 1-1/2"-8,will fit 9" south bend

machinist tool,5" 3 jaw scroll chuck 1-1/2"-8,will fit 9" south bend

  • United States
  • Jan 30th
STEELEX D3608 5" 3 JAW SCROLL CHUCK BRAND NEW IN BOX!

STEELEX D3608 5" 3 JAW SCROLL CHUCK BRAND NEW IN BOX!

  • Beaver Falls, Pennsylvania, United States
  • Jan 30th
NORGREN EC63D-A-1-0-0-R-45-10-0 POWER CLAMP - NNB - FREE SHIPPING!!!

NORGREN EC63D-A-1-0-0-R-45-10-0 POWER CLAMP - NNB - FREE SHIPPING!!!

  • Otisville, Michigan, United States
  • Jan 30th
BTM 745100G-R-SC2 POWER CLAMP - USED - FREE SHIPPING!!!

BTM 745100G-R-SC2 POWER CLAMP - USED - FREE SHIPPING!!!

  • Otisville, Michigan, United States
  • Jan 30th
BTM STC62-120-723124H-90AR-SC2-MUB POWER CLAMP - USED - FREE SHIPPING!!!

BTM STC62-120-723124H-90AR-SC2-MUB POWER CLAMP - USED - FREE SHIPPING!!!

  • Otisville, Michigan, United States
  • Jan 30th
KM-TYPE ER40 COLLET CHUCK NUT(18000RPM) (3900-0697)

KM-TYPE ER40 COLLET CHUCK NUT(18000RPM) (3900-0697)

  • Chino, California, United States
  • Jan 30th
ER-32 5/8 INCH COOLANT THRU SPRING COLLET (3900-5553) - MADE IN TAIWAN

ER-32 5/8 INCH COOLANT THRU SPRING COLLET (3900-5553) - MADE IN TAIWAN

  • Chino, California, United States
  • Jan 30th
1-1/4 X 6 INCH ER-32 STRAIGHT SHANK CHUCK EXTENSION (3900-5122)

1-1/4 X 6 INCH ER-32 STRAIGHT SHANK CHUCK EXTENSION (3900-5122)

  • Chino, California, United States
  • Jan 30th
1mm to 10 mm by 1 mm ER-16 Collet 10 Pcs/Set in Fitted Aluminium Box, #3350-0582

1mm to 10 mm by 1 mm ER-16 Collet 10 Pcs/Set in Fitted Aluminium Box, #3350-0582

  • Richmond Hill, Ontario, Canada
  • Jan 30th
2mm to 16mm by 1mm ER-25 Collet 15 Pcs/Set in Fitted Strong Alu Box, #3350-0584

2mm to 16mm by 1mm ER-25 Collet 15 Pcs/Set in Fitted Strong Alu Box, #3350-0584

  • Richmond Hill, Ontario, Canada
  • Jan 30th
COLLET TG150 CARBOLOY 1-7/64" COLLET #7108

COLLET TG150 CARBOLOY 1-7/64" COLLET #7108

  • Resaca, Georgia, United States
  • Jan 30th
6-1/2" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-1/4"-8 THREADED MOUNT

6-1/2" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-1/4"-8 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
7" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-3/8"-5 THREADED MOUNT

7" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-3/8"-5 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
Aluminium Vacuum table 260 x260mm w/ ON-OFF & Adjust Switch (#960)

Aluminium Vacuum table 260 x260mm w/ ON-OFF & Adjust Switch (#960)

  • Taipe, Taiwan
  • Jan 30th
6.42-5.2 LNS "SUPER HYDROBAR" 6-SPINDLE BAR FEED - #24851

6.42-5.2 LNS "SUPER HYDROBAR" 6-SPINDLE BAR FEED - #24851

  • Cincinnati, Ohio, United States
  • Jan 30th
Feeler Thickness Gage Set .0015-.200 Tempered Steel 1/2" W 14-151-5 QTY 2 |HR2|

Feeler Thickness Gage Set .0015-.200 Tempered Steel 1/2" W 14-151-5 QTY 2 |HR2|

  • Saint Louis, Missouri, United States
  • Jan 30th
Destaco Pivot Unit Series 3 PM3 *new*

Destaco Pivot Unit Series 3 PM3 *new*

  • Cumberland, Rhode Island, United States
  • Jan 30th
Northern Industrial Benchtop Yoke Pipe Vise 3/8" - 3-1/2"

Northern Industrial Benchtop Yoke Pipe Vise 3/8" - 3-1/2"

  • Ann Arbor, Michigan, United States
  • Jan 30th
COLUMBIAN SWIVEL BENCH VISE #D45 M3 7 1/2" OPEN

COLUMBIAN SWIVEL BENCH VISE #D45 M3 7 1/2" OPEN

  • Orland Park, Illinois, United States
  • Jan 30th
WILTON Power Arm W/ KANT-TWIST Welding Clamp 3" Jaw Rare One Off Aerospace Tool

WILTON Power Arm W/ KANT-TWIST Welding Clamp 3" Jaw Rare One Off Aerospace Tool

  • Long Beach, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies