Audio Precision Sys 2 - 2522a Dual Domain - Warranty

US $7,950.00

Los Angeles, California, United States
Jan 29th

Open on mobile:
QR code

Audio Precision Sys 2 - 2522A Dual Domain - Warranty Call Dr. Marshall Buck toll free at 877-798-8324 Copyright 2014 Psychotechnology, Inc. Audio Precision Dual Domain Audio Analyzer System Two Cascade Model 2522A 96 kHz With APIB Interface USB Interface Adaptor included Exceptionally Clean Unit Fully Performance Adjusted, and Warranted for 90 Days Two Channel Analog+Digital Generator and Two Channel Analog+Digital Analyzer 256 MB Memory This Model is a Flagship System 2 with many features of the 2722: It runs under the latest AP Operating System, 2700 v 3.30, which allows it to connect to a Win 7 or Win 8 PC using the included USB Adaptor. Dual Channel Analog 40/150/600 Ohm Output Z 250 microvolts to 26.67 volts RMS with Dual Jensen Transformers Analog Sine Sweep from 10Hz to 200 kHz w/Analog Stimulus Flatness Accurate to +/- 0.007 dB Multitone FastTest - Rapidly (one second 20 Hz to 20 kHz) test Frequency Response, Distortion, Noise, Crosstalk Analyzer Bandwidth 500 kHz Analyzer Input Voltage Range to 200 Volts Peak Digital Interface Analyzer included Allows Jitter Analysis and much more. Digital sampling to 262.144 kHz SYS-2522A -System Two Dual Domain test set: DSP-equipped, includes all SYS-2222 capability plus digital domain signal generation and analysis capability via digital input and output in the AES/EBU (balanced and unbalanced) and consumer (coaxial and optical) formats, plus parallel, and general purpose serial I/O. The SYS-2522 includes the most complete AES/EBU and consumer digital interface stimulus and measurement capability in the industry (INTERVU). With dual domain architecture, the analog hardware generator and analog hardware analyzer for analog domain devices are separate and independent from DSP modules which stimulate and analyze digital domain devices, including digital data testing with BITTEST. Key analog generator specifications include spurious and harmonic specifications of -120 dB and flatness of ±0.008 dB. Analog analyzer specs feature residual noise of less than 1 microvolt (-118 dBu), flatness of ±0.008 dB and residual THD+N of -108 dB (0.0004%). Measures amplitude, level, ratio, crosstalk, bandpass amplitude, frequency, phase, THD+N, and optionally IMD. Internal Options System Two's architecture is internally modular. This permits configuration to your needs at the time of purchase, and later upgrades as needs change. Available - Call for Price: Plug in analog filter : A-Weight. SLPX AES 17 Lowpass filter set: 20 kHz pre-analyzer filter plus FLP-20K 20 kHz and FLP-40K 40 kHz Brickwall plug-in filters. Avalable - Call for price: The BUR option adds analog domain generation of burst sine waves with controllable burst duration, interval, and lower amplitude between bursts, plus squarewaves to 20kHz, analog random and pseudorandom white and pink noise, and bandpass filtered pink noise. Available - Call for Price:The IMD option analyzes analog domain devices for intermodulation distortion to the SMPTE/DIN, CCIF/DFD (twin tone or difference tone) and DIM/TIM (dynamic/transient intermodulation distortion) standards Available- Call for Price: Wow & Flutter measurement option board. List Price of this unit is over $20K Internal Speaker to Monitor Signals For Manual and full Specs go to: http://ap.com/downloads/discontinued and click on User Manuals and Specifications The World Standard for Audio System Measurements Test Avionics, Audio Processors, Broadcast Links, PA Systems, Vacuum Tube Electronics, Amplifiers, Preamplifiers, Low Noise Amplifiers Testing Capability Includes: Frequency Response, Crosstalk, Noise, Distortion (Harmonic), Common-Mode Rejection. 2 Channel Ratio, FFT Spectral Analysis to 32k points Total Harmonic Distortion Measurements Input/Output Linearity Testing Program Automated Test Procedures for QC using Included AP Basic Software Regulation: Invoke Servo Feedback to Set Criterion Variable - E.G. Vary Drive Level for a Defined Level of Distortion Floating Balanced XLR I/O or Unbalanced BNC I/O with 200 kOhm Input Z ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ You need to provide a Windows XP to Win 8 PC with a free USB port to Control the AP Analyzer Questions? Call Dr. Marshall Buck Toll-Free at 877-798-8324 9 AM to 5 PM PDT 90 Day Warranty Includes USB Interface Adaptor, USB Cable, APIB cable, Power Cord and APWin 2700 v 3.30 Software, plus Sample Tests and useful files and drivers on CD. Power supply can be set for 100, 120, 220, 230 Volts. Copyright 2014 Psychotechnology, Inc. Prev Stop Play Next