Autoclave Tuttnauer 1730mk Sterilizer 120volt Tattoo Dental Veterinary Salon

US $2000

Saint Petersburg, Florida, United States
Jun 1st

Open on mobile:
QR code

+ When we receive these units, they are used cores coming from many different doctors and many different facilities, we tend to start from ground zero with every autoclave.+ Whether each autoclave has been used or abused we inspect every aspect of the autoclave for potential failures. In addition, every autoclave is chemically cleaned of debris, gunk, and bacterial growth that accumulate in the chambers, reservoirs, valves and plumbing. + Electrically inspecting these units requires more than just replacing a power cord as there can be thousands of connections that can go wrong, including but not limited to solder joints on the circuit boards, heating elements, switches, sensors, lights, pumps, circuit breakers and all wiring. Nothing can be left unchecked. + As for parts replaced, maintenance parts are always a must. Rubber seals, o-rings, and gaskets unfortunately do not last forever. With the constant high heat and pressure these parts begin to shrink, break down, harden, and become brittle. Re-leveling every unit for proper water filling is a must as it helps lengthen the life of heating elements and tends to cause less over heating. + When it comes to paint and body, our main goal is to give you a respectable good looking unit not a sports car paint job. We like to earn our customers respect by the reliability and quality of operation rather than how pretty the unit looks. + Once the repair of the unit is done we move on to testing. All repaired units are then tested extensively (15 cycles at least). If there is even one failure in any of the cycles we send the unit back and we start the entire process over. When a unit finishes testing and checks out, then it is pictured and listed on eBay. Once a purchase is made and payment is received, we pull the unit down and run complete cycles for the entire day. + Our packing process is just as important as our product. If you can not pack and ship your unit safely to your customer, you have nothing. We would not only be loosing money, but we would be wasting your time. + Bottom line is we strive to give you the most for your buck. There is no middle man to eat away your dollar. Your buying a unit directly from a small business repair company with no sales gimmick involved. Just simply a repair guy giving you the best quality product that he can. The Tuttnauer 1730 will service all of your basic sterilization needs at an economical price. The compact size of this refurbished autoclave (7” chamber) makes it a perfect primary unit for small offices or a secondary backup unit larger practices. The fast cycle time and heated drying delivers a quick turnaround for wrapped or unwrapped instruments. AWESOME CONDITION UNIT HAS BEEN FULLY CLEANED NEW SEALS AN GASKETS SOME NEW HEATING ELEMENTS NEW POWER CORD NEW POWER SWITCH NEW RESERVOIR COVER MULTI VALVE AND SWITCHES NEW INDICATOR LIGHT LEVELING FEET ALL NEW WIRING AND ELECTRICAL CONNECTIONS CONDENSER COIL RUNS PERFECT Guaranteed Working When Received Overall Size:Width: 17-3/8" (44.1 cm) Length: 18" (45.7 cm) Height: 12" (30.5 cm) Chamber:Diameter: 6-3/4" (17.1 cm) Length: 13-1/2" (34.3 cm) Tray Size:Width: 4-3/4" (12 cm) Length: 11-5/8" (29.5 cm) Height: 7/8" (2.2 cm) Unit Weight: 45 lbs (20.4 kg) Electrical: 120 Volts, 1350 Watts, 50/60 Hz, 12 Amps 2 Gallon Chamber (7.6 Liters) Holds 3 trays Cycle Time: Varies based on items to be sterilized - Wrapped instruments 20-30 minutes Drying Time: Up to 30 minutes "Ready To Be Put To Work" The next day it is packaged and shipped out. All units will ship no later then 3 days of receiving payment but in most cases it is in 2 days. We ship anywhere in the continental United States. If you have any questions or if you are in need of repairs for an autoclave please contact us at 727-286-1524. "Over 20 years in Autoclave and Dental repair" ClaveDynasty LLC "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."