Avcom PSA-37D Portable 1 MHz to 4.2 GHz Spectrum Analyzer, US $1,749.99 – Picture 0

Avcom PSA-37D Portable 1 MHz to 4.2 GHz Spectrum Analyzer, US $1,749.99 – Picture 1

Avcom PSA-37D Portable 1 MHz to 4.2 GHz Spectrum Analyzer, US $1,749.99 – Picture 2

Avcom Psa-37d Portable 1 Mhz To 4.2 Ghz Spectrum Analyzer

US $1,749.99

Phoenix, Arizona, United States
Jan 29th

Open on mobile:
QR code

Click Here. Double your traffic. Get Vendio Gallery - Now FREE! Avcom PSA-37D Portable 1 MHz to 4.2 GHz Spectrum Analyzer Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit is guaranteed to work for 30-days, parts and labor, excluding freight. The Unit's Serial Number Tag Reads: Model Number: PSA-37D Serial Number: 21192 Power Requirements: 120 VAC, 60 Hz Link to the Datasheet: Avcom PSA-37D Portable Spectrum Analyzer Datasheet Description: The PSA-37D Spectrum Analyzer is a high performance, reliable instrument for making accurate signal strength measurements of wideband signals over the frequency range commonly used in the satellite communications industry. The unit is small and lightweight, battery-operated, or can be operated from 115 VAC, and includes its own battery recharger. Two to three hours of battery operation (depending on duty cycle) are possible. LNA’s and BDC’s can be powered up the feed line via the front panel coax connectors by setting the LNA/BDC PWR switch to ON. Maximum current 1/2 amp. The PSA-37D can be used to acquire a satellite signal initially on a dish antenna and then to optimize the tracking adjustments much faster than conventional methods. Low Noise Amplifier and Block Downconverter performance ban be determined instantly from the spectrum analyzer display. In fact, PSA-37D is able to clearly show the difference in the output noise levels of an LNA when it is pointed at the ground and when pointed at clear sky (a very good indication of LNA operation). Amplitude accuracy is typically within ±2 dB on each band so that meaningful and reproducible signal measurements can be taken. On-screen dynamic range is better than 60 dB. Frequency coverage is from less than 10 MHz to over 1750 MHz and less than 3.7 GHz to over 4.2 GHz in 5 bands. Each band is designed to cover a specific group of frequencies of interest to the satellite communications industry. The PSA-37D can be tuned through the selected band and signals of interest can be centered on the display while their frequency is shown on the center frequency display. The 4 digit LCD center frequency readout allows you to quickly and correctly identify the frequency in MHz of a signal centered on the PSA-37D display. Specifications: Frequency Coverage: Low Bands: Less than 10 to 500 MHz, 500 to 1000 MHz, 950 to 1450 MHz, 1250 to 1750 MHz High Bands: 3.7 to 4.2 GHz Notes: 70 MHz and other receiver IF frequencies. 3.7 to 4.2 GHz and 12 GHz block downconverter frequencies Input Connectors: Low Band: BNC High Band: Type N Input Connector DC Block Capability: Both input connectors are DC blocked and provision is made for insertion of +12 or +18 VDC into connector by front panel. Frequency Display Accuracy: 4 digit LCD frequency readout - Accuracy ±6 MHz nominal, at zero span. Display: 10 horizontal graticule divisions (frequency) x 7 vertical graticule divisions (amplitude). Each vertical division equals either 2 dB or 10 dB. Reference Levels: 0, -20, and -40 dBm/+49, +29, and +9 dBmv Dynamic Range: 60 dB Display Sensitivity: 2 dB/DIV or 10 dB/DIV Amplitude Accuracy: ±2 dB, typical per band Resolution Bandwidth: 250 kHz Calibration: Internal calibration, factory set. Span: Over 500 MHz (50 MHz/DIV) to less than 1 MHz/DIV Weight: 17 lbs. (7.72 kg) Dimensions: 14.5" W x 5.5" H x 13.5" D (37 cm x 14 cm x 34 cm) Circuitry: Most circuitry on pluggable PC boards for rapid and easy service. Construction: Attractive and durable epoxy painted heavy gauge aluminum chassis and cover, with carrying handle, and line cord storage brackets which double as feet to stand the PSA-37D on end for easy viewing and operation in the field. Power Requirements: 115 VAC, 60 Hz, 15 watts or internal rechargeable batteries for portable operation. For More Pictures Please Click the Following: Picture 2 - Front View Picture 3 - Back View Picture 4 - Serial Number Tag For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $25.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 02/24/14 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Model	PSA-37D
Analyzer Type	Spectrum Analyzers
Manufacturer	Avcom
Unit Type	Complete Systems & Mainframes