aws a5.1 for sale, brand-new and used.

ER316LSI is similar to ER316L with an increased silicon content that drastically improves the wetting characteristics of the weld producing a very smooth bead. This product is used in applications where a good cosmetic appearance is important. AWS Specification AWS A5.9/A5.9M:2006 AWS Classification ER316LSI Welding Current

Up for sale our 2 spools of welding wire. wire is new. 1 = ER 70S-6 .045 620 FI There is only about 8 pounds not 11 on spool 1 = ER316 .025 STAINLESS AWS/SFA A5.9 There is only about 1 pound on spool not 2

ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding.

This listing is for 5 pounds of Washington Alloy 1/8" ER-70S-2 Mild and Carbon Steel Tig Rod - 36" Below is the Manufacturer's Description: Specifications AWS A5.18 Class ER70S-2 Description USA 70S-2 is a multiple deoxidized wire containing small amounts of zirconium, titanium and aluminum in addition to the manganese and silicon deoxidizers characteristic of the steel wire group.

new in factory sealed tubes I think one or two of these have a corner dinged on them from shipping but other then that they are still packaged in boxes of 6 from ESAB thanks for looking 5.67KG AP-100 811010123 1/8 x 14 AWS A5.1 E6010

ERCu (Deoxidized Copper) is a filler metal containing 98% or more copper with small amounts of Phosphorus and Silicon used for joining copper to itself or with galvanized or mild steel where high strength joints are not required. This easy flowing alloy produces weld deposits that match the color of copper, are electrically conductive and porosity free.

ER70S-2 is a premium MIG & TIG wire for welding on all grades of mild and carbon steels, producing quality welds with minimal porosity. It is a triple deoxidized wire (Zirconium, Titanium, and Aluminum) making it an excellent choice for welding over rust and mill scale. No flux is required with this product.

Alloy ER1100 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and is used extensively in thin gauge and foil products. It has good welding characteristics and it is also used as a filler alloy for welding purposes.

This listing is for 13 rods (approx. 1 pound) of Washington Alloy 3/32" ERCuSi-A Silicon Bronze Tig 36" Rod Below is the Manufacturer's Description: Specifications: AWS A5.7 Description: Washington Alloy Silicon Bronze is a copper based filler metal containing about 3% silicon and may have small percentages of manganese, tin, and zinc. Silicon bronze is typically used for gas-tungsten arc welding and gas-metal arc welding of copper, brass, bronze, steel, galvanized steels and also cast iron.

This listing is for 1 pound of Washington Alloy 1/16" RBCuZn-C Low Fuming Bronze (Bare) Tig 36" Rod Below is the Manufacturer's Description: Specifications: AWS A5.8 Description: Washington Alloy Low Fuming Bronze is a general-purpose oxyacetylene brazing rod used for steel, copper alloys, cast iron, nickel alloys and stainless steel.

0.030" MIG WELDING WIRELot of 4 Spec: AWS A5.10Size: 0.030"Heat: M5256Net Wt: 1 lbsWA PT#TA 4043 04

E71T-1/1M is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70 ksi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties.

 

Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated.

Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated.

The higher thoria content in the EWTh-2 electrode causes the operating characteristic improvements to be more pronounced than in the lower thoria content EWTh-1. The additional thoria also provides about 20 percent higher current-carrying capacity, longer life and resistance to contamination of the weld. Should it be desired to use these electrodes for AC welding, then balling can be accomplished by briefly, and carefully, welding with DC electrode positive prior to welding with AC.

When comparing prices, note shipping insurance is included on shipments in the US and we ship priority mail or UPS, not parcel post!! If you want a shipping discount on multiple items, buy the items you want, do not pay for any items, and we will send you an invoice. The invoice will be in your “My E-bay” “Buying” “”Won” area.

When comparing prices, note shipping insurance is included on shipments in the US and we ship priority mail or UPS, not parcel post!! If you want a shipping discount on multiple items, buy the items you want, do not pay for any items