Bacharch Informant Refrigerant Leak Detector 19-9210, US $195.00 – Picture 0

Bacharch Informant Refrigerant Leak Detector 19-9210, US $195.00 – Picture 1

Bacharch Informant Refrigerant Leak Detector 19-9210, US $195.00 – Picture 2

Bacharch Informant Refrigerant Leak Detector 19-9210, US $195.00 – Picture 3

Bacharch Informant Refrigerant Leak Detector 19-9210

US $195.00

Port Hueneme, California, United States
Jan 29th

Open on mobile:
QR code

This works very well The Informant Refrigerant Leak Detector 6 Instruction 0019-9210 Features Features • Quickly pinpoints the location of refrigerant leaks • Patented sensor that represents the latest advancements in sensor tech- nology • Microprocessor-controlled circuitry • Dual bar-graph LED’s, located both on top and at the rear of the detec- tor, provide visual indication of the refrigerant level from a wide variety of viewing angles • Audible refrigerant-level indicator with mute feature • Flashing probe tip refrigerant-level indicator • Low-sensitivity mode, pushbutton selectable • Automatic zero and background compensation that allows a leak to be quickly found in contaminated atmospheres without requiring manual sensitivity adjustments • Flexible probe that allow it to be either “docked” in its storage position for close-up leak testing, or unfolded to its maximum length of 20 inches (508 mm) for locating leaks in hard-to-reach areas • Filter in probe tip prevents dust, dirt and water from reaching sensor • One-handed operation • No user calibration required • Long life, DC brushless fan provides positive air flow past sensor resulting in a faster response time • Batteries included • Optional protective rubber boot • One year warranty • Extended warranty available • Made in U.S.A Instruction 0019-9210 The Informant Refrigerant Leak Detector Technical Characteristics Power .......................................... Four ‘AA’ Alkaline Batteries Warm-Up Time .......................... 10 seconds Refrigerants Detected ................ All CFC, HCFC and HFC refrigerants including: R-12, R-22, R-123, R-134a and blends R-404A, R-408A, R-409A, and R-410A (i.e., any refrigerant containing Chlorine, Fluorine or Bromine gas) Sensor: Type ......................................... Heated Diode, Dispersive Electron, Plug-In Life Expectancy ....................... Typically 150 hours or 1 year of normal use Probe ........................................... Flexible gooseneck, 20 inch (508 mm) maxi- mum [reduces to 3 inches (76 mm) when wrapped around instrument], includes inte- gral sensor, fi lter, and LED. Probe tip is 0.2" (5 mm) in diameter and 1" (25 mm) long. Battery Life ................................ 4–5 hours, under typical intermittent opera- tion Visual and Audible Indicators: Power On ................................. Green LED Low Battery ............................. Red LED Low Sensitivity Mode ............. Amber LED Relative Refrigerant Level ..... The detector responds to an increasing change in refrigerant level by activating its visual and audible indicators as follows: Visual – Dual LED bar-graphs (located on the top and rear of the detector) begin to progressively glow in series. In addition, an LED located in the probe tip begins to increase its blink rate from an idle rate of once-per-second. Audible – The audible indicator’s tick rate begins to increase from its idle rate of one- tick-per-second. Sensor Failure ......................... The middle refrigerant-level LED on both displays glows steady The Informant Refrigerant Leak Detector 8 Instruction 0019-9210 Technical Characteristics Switches: Power ....................................... Toggles detector ON/OFF Mute......................................... Toggles audible indicator ON/OFF, and Toggles Low-Sensitivity Mode ON/OFF when switch is held down > 3/4 second Sampling System Flowrate ...... 40 to 50 cc/min with sensor installed Response Time ........................... 0.2 second Sensitivity: Normal ..................................... 0.5 oz/year (14 g/yr) of R134a (hardest to detect refrigerant) as detected by mov- ing probe tip at 2" (50 mm) per second, 0.1" (3 mm) above leak source. A leak rate of less than 0.25 oz/year (7 g/yr) can be de- tected when probe tip is held steady over leak source for at least 5 seconds. Low .......................................... 1/10 of normal Sensitivity Adjustment .............. Automatic – in either sensitivity mode Weight ........................................ 0.86 lb (0.39 kg) w/ batteries Size (excluding probe) ............... 1.75W x 9.62L x 2.25H inches (44.5 x 244.3 x 57.2 mm) Probe Length .............................. 20" (508 mm) Operating Environment: Position .................................... Any Temperature ........................... 32 to 122 °F (0 to 50 °C) Humidity ................................. 15 to 90% RH, non-condensing Approvals .................................... CE Mark & UL listed in accordance to SAE J1627

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Bacharach
Model	informant 19-9210