Bactron Anaerobic Chamber, US $1,300.00 – Picture 0

Bactron Anaerobic Chamber, US $1,300.00 – Picture 1

Bactron Anaerobic Chamber, US $1,300.00 – Picture 2

Bactron Anaerobic Chamber, US $1,300.00 – Picture 3

Bactron Anaerobic Chamber

US $1,300.00

Houston, Texas, United States
Feb 22nd

Open on mobile:
QR code

Features 17.6 cu.ft. of workspace with two shelves and 600 plate capacity. Gloveless Design – Comes with a sleeve assembly and small, medium, and large cuffs Microprocessor Controlled?-- Electronic controls operate a programmed sequence to provide desired atmosphere. Air lock can be operated both automatically and manually. Gauges and visual indicators show pressure, temperature and status of cycle. Catalyst Oxygen Removal, Humidity Control?-- The anaerobic chamber atmosphere circulates through condensate controller then through a catalyst, which removes any trace amounts of oxygen. High relative humidity is maintained while condensate moisture is removed without use of unnecessary desiccants, which can dehydrate media and samples. Pressure Control?-- Chamber is equipped with automatic pressure control (manometer) providing positive pressure at approximately 0.25' water and giving quick visual check of pressure level. Vacuum pump connections provide the ability to rapidly evacuate air from the air lock module for replacement by inert gas mixture. Revolving Shelf in the Bactron IV incubator. Gas connections provide the ability to operate the chamber as either a one or two gas system. Incubator is separate from the working chamber. A sliding shelf inside the air lock module to making loading of materials and samples easy. One interior 240 Volt electrical outlet. Condition: This used Bactron anaerobic chamber is in working condition. Unit was powered up and tested. Incubator heats up. Vacuum pump pulls down a vacuum in the airlock to the set level and shuts off the way it should. Comes with a sleeve assembly and sleeve cuffs (lrg/med/small). There are small scratches and wear and tear to the outside paint. The front view shield has some scratches and small cracks. Two bolts have also been broken off. None of these imperfections compromise the integrity of the unit. The interior floor also has some paint chips and bubbling. Local pick up (Houston, Texas) or buyer pays for shipping/freight packing. Seller will help facilitate the process if buyer chooses to pay for shipping/packing. Overall dimensions: 88 x 32 x 27H Interior working chamber: 42.5 x 28.5 x 25H Specifications: MFG: Sheldon Manufacturing Serial: 1100291 Volts: 120 Amps: 1150 Watts Phase: 1 Notice: As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components, which were not known and could not be known without full scale setup and operation of the machine. Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment. The very few times we have had to deal with these issues we have been very helpful in resolving the problem.