+ Post new Ad
Bal-Tec 75-TBR-T Kinematic Truncated and Threaded Ball .75", US $20.00 – Picture 0
Bal-Tec 75-TBR-T Kinematic Truncated and Threaded Ball .75", US $20.00 – Picture 1
Bal-Tec 75-TBR-T Kinematic Truncated and Threaded Ball .75", US $20.00 – Picture 0
Bal-Tec 75-TBR-T Kinematic Truncated and Threaded Ball .75", US $20.00 – Picture 1

Bal-tec 75-tbr-t Kinematic Truncated And Threaded Ball .75"

US $20.00

  • Briarcliff Manor, New York, United States
  • Feb 13th
Open on mobile:
QR code
  Bal-Tec 75-TBR-T Kinematic Truncated and Threaded Ball .75" Because the ball is held from behind with a machine screw, there is no interruption of the spherical surface. This provides a smooth, clean working surface. The truncated and threaded ball is our most widely used kinematic component. This ball is held in place by a threaded fastener. It has a .005" deep recess on the flat surface that is made very rough by Electrical Discharge Machining (EDM). When maximum reliability is required, glue may be applied to this rough surface to form a permanent bond between this component, the machine screw, and the mounting surface. The annular ring resulting from the recess forms an extremely stable mounting surface. Three of these balls provide a very high quality substitute for a conical cup or trihedral clamp. This design has a much lower profile height than a complete ball. These balls are an excellent choice for the three spherical contact points in the kinematic system. Part No. (Click for IGES File) A-Diameter +.0001" B-Height +.002" C-Diameter Reference E-Thread F-Depth Minimum G-Diameter Reference 75-TBR-T .750" 19.05 mm .500" 12.70 mm .707" 17.958 mm 1/4-20 .250" 6.35 mm .500" 12.70 mm We always combine shipments and refund the excess shipping by PayPal. Powered by SixBit's eCommerce Solution
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Bal-Tec
Model 75-TBR-T

Directions

Similar products from Supporting Blocks & Sets

Mitutoyo 10008 0 Angle Block, +/- 20 sec Accuracy, 10 Degree

Mitutoyo 10008 0 Angle Block, +/- 20 sec Accuracy, 10 Degree

  • Richmond Hill, New York, United States
  • Feb 14th
4 sets parallels

4 sets parallels

  • Bronson, Florida, United States
  • Feb 14th
machinist tool,Darex drill grinder drill holder

machinist tool,Darex drill grinder drill holder

  • United States
  • Feb 14th
MACHINIST PARALLEL SET UP BLOCKS-HARDENED/GROUND- 4 ALIKE- 1 3/16 x 2 7/8 x 13

MACHINIST PARALLEL SET UP BLOCKS-HARDENED/GROUND- 4 ALIKE- 1 3/16 x 2 7/8 x 13

  • Roscommon, Michigan, United States
  • Feb 14th
HEINRICH TOOLS V-BLOCK 6-VB

HEINRICH TOOLS V-BLOCK 6-VB

  • Lindale, Texas, United States
  • Feb 14th
V Block/Clamp Brown & Sharpe # 750A

V Block/Clamp Brown & Sharpe # 750A

  • Easton, Connecticut, United States
  • Feb 14th
Starrett # 271 Set w/ V - Blocks & Clamp / FB 105

Starrett # 271 Set w/ V - Blocks & Clamp / FB 105

  • Easton, Connecticut, United States
  • Feb 14th
V-BLOCK MAGNETIC TRANSFER • ALUMINUM W/STEEL • TOOLMAKER•MACHINIST•TOOL & DIE

V-BLOCK MAGNETIC TRANSFER • ALUMINUM W/STEEL • TOOLMAKER•MACHINIST•TOOL & DIE

  • Lewiston, Michigan, United States
  • Feb 14th
L.S.STARRETT Co. VINTAGE No.54 HOLD-DOWNS MACHINIST Athol Mass. USA

L.S.STARRETT Co. VINTAGE No.54 HOLD-DOWNS MACHINIST Athol Mass. USA

  • Cadott, Wisconsin, United States
  • Feb 14th
V-Block

V-Block

  • Bronson, Florida, United States
  • Feb 13th
KINEMATIC CYLINDRICAL BOSS MOUNTED VEE BLOCK, 0.750" CYLINDRICAL POST MOUNTED

KINEMATIC CYLINDRICAL BOSS MOUNTED VEE BLOCK, 0.750" CYLINDRICAL POST MOUNTED

  • Briarcliff Manor, New York, United States
  • Feb 13th
Machinists 2/10 USA Awesome Stepped Tapped andgle Plate with V Groove

Machinists 2/10 USA Awesome Stepped Tapped andgle Plate with V Groove

  • Lutz, Florida, United States
  • Feb 13th
Machinists 2/10 Nice Mid Size Set up V Block with clamp

Machinists 2/10 Nice Mid Size Set up V Block with clamp

  • Lutz, Florida, United States
  • Feb 13th
Machinists 2/10 USA Awesome2 1/2 D USA Bench Block==machinists art BEAUTY

Machinists 2/10 USA Awesome2 1/2 D USA Bench Block==machinists art BEAUTY

  • Lutz, Florida, United States
  • Feb 13th
Machinists 2/10 Matched Brown Sharpe Model 745 Comple3x Block Set

Machinists 2/10 Matched Brown Sharpe Model 745 Comple3x Block Set

  • Lutz, Florida, United States
  • Feb 13th
Machinists 2/10 USA Clamp + Extension kit for punch Formers

Machinists 2/10 USA Clamp + Extension kit for punch Formers

  • Lutz, Florida, United States
  • Feb 13th
Mitutoyo 986-293 Magnetic V Block pair

Mitutoyo 986-293 Magnetic V Block pair

  • Phoenix, Arizona, United States
  • Feb 13th
Machinist Parallels

Machinist Parallels

  • Haslett, Michigan, United States
  • Feb 13th
MACHINIST LATHE MILL Machinist Lot of Tap Die Set Saw Chucks Parts Etc

MACHINIST LATHE MILL Machinist Lot of Tap Die Set Saw Chucks Parts Etc

  • Morris Plains, New Jersey, United States
  • Feb 13th
Starrett V Block / Clamp 271C

Starrett V Block / Clamp 271C

  • Muncie, Indiana, United States
  • Feb 13th

People who viewed this item also vieved

Sowa ER32 CNC 10.0mm (3/8in.) Precision Spring Collet

Sowa ER32 CNC 10.0mm (3/8in.) Precision Spring Collet

  • Alpharetta, Georgia, United States
  • Mar 27th
LOT OF 4 5C 3" STEP COLLETS

LOT OF 4 5C 3" STEP COLLETS

  • Ellington, New York, United States
  • Mar 27th
LOT OF 6 5C 2" STEP COLLETS HARDINGE

LOT OF 6 5C 2" STEP COLLETS HARDINGE

  • Ellington, New York, United States
  • Mar 27th
34" x 24" x 3.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

34" x 24" x 3.25" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

  • Grand Rapids, Michigan, United States
  • May 15th
36" x 14" x 4" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

36" x 14" x 4" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot

  • Grand Rapids, Michigan, United States
  • May 15th
6" X 5" Sine Plate ~ Like Brown & Sharpe. Solid Good Condition

6" X 5" Sine Plate ~ Like Brown & Sharpe. Solid Good Condition

  • Puyallup, Washington, United States
  • May 15th
Clamp Die or Machine setup 6" Clamp #46

Clamp Die or Machine setup 6" Clamp #46

  • Scottsboro, Alabama, United States
  • May 22nd
Judd C-Clamps 2 Inch lot of 3

Judd C-Clamps 2 Inch lot of 3

  • Phoenixville, Pennsylvania, United States
  • May 23rd
Lot of 2 Knu-Vise Welding Clamps P-1200 MADE IN USA

Lot of 2 Knu-Vise Welding Clamps P-1200 MADE IN USA

  • Minneapolis, Minnesota, United States
  • May 24th
Jacobs # 4 Chuck Key

Jacobs # 4 Chuck Key

  • Baldwin, New York, United States
  • Jun 6th
Jacobs Chuck #14N capacity 0 through 1/2" with R8 Taper

Jacobs Chuck #14N capacity 0 through 1/2" with R8 Taper

  • Baldwin, New York, United States
  • Jun 6th
10" 3 jaw lathe chuck plain back Southbend,Logan, Monarch

10" 3 jaw lathe chuck plain back Southbend,Logan, Monarch

  • Verona, Wisconsin, United States
  • Jun 7th
PALMGREN MINI MACHINIST VISE – 2" Wide - 4.35" Long

PALMGREN MINI MACHINIST VISE – 2" Wide - 4.35" Long

  • Roscommon, Michigan, United States
  • Jun 8th
PALMGREN 6" CROSS SLIDE VISE

PALMGREN 6" CROSS SLIDE VISE

  • Buffalo, New York, United States
  • Jun 8th
Screw Guide Toolmakers Vise 2" with V Groove Attachment Jaw

Screw Guide Toolmakers Vise 2" with V Groove Attachment Jaw

  • Waynesville, Ohio, United States
  • Jun 9th
Royal 3 MT Solid Dead Center 11021

Royal 3 MT Solid Dead Center 11021

  • Millstone Township, New Jersey, United States
  • May 25th
Fabricated Dynamics Research style balance machine

Fabricated Dynamics Research style balance machine

  • Las Vegas, Nevada, United States
  • May 25th
USED DEAD CENTER 5MT 1.754" POINT

USED DEAD CENTER 5MT 1.754" POINT

  • Fairfield, Iowa, United States
  • May 25th
Martin 50BS141 Sprocket - NEW

Martin 50BS141 Sprocket - NEW

  • Kansas City, Missouri, United States
  • May 31st
10 Side Grip Clecos Genuine Kwik-Lok Heavy Duty 1" Side clamp Cleco w/ Pliers

10 Side Grip Clecos Genuine Kwik-Lok Heavy Duty 1" Side clamp Cleco w/ Pliers

  • Weatherford, Texas, United States
  • May 31st
10 Side Grip Clecos Genuine Kwik-Lok Heavy Duty 1" Side clamp Cleco

10 Side Grip Clecos Genuine Kwik-Lok Heavy Duty 1" Side clamp Cleco

  • Weatherford, Texas, United States
  • May 31st
20" TROYKE MODEL VP-20, VERTICAL/HORIZONTAL ROTARY TABLE

20" TROYKE MODEL VP-20, VERTICAL/HORIZONTAL ROTARY TABLE

  • Pomona, California, United States
  • Jun 4th
NIKKEN 19" MANUAL TILTING ROTARY TABLE CENTER HEIGHT 11.33"

NIKKEN 19" MANUAL TILTING ROTARY TABLE CENTER HEIGHT 11.33"

  • Pomona, California, United States
  • Jun 4th
G&L Rotary Indexing Table

G&L Rotary Indexing Table

  • Alton, Illinois, United States
  • Jun 4th
Hardinge SJOGREN Speed Chuck 5C-A

Hardinge SJOGREN Speed Chuck 5C-A

  • Rochester, New York, United States
  • Jun 9th
USED SCULLY-JONES X-PRESS CHANGE KWIK SWITCH 100 x AF COLLET CHUCK 95121

USED SCULLY-JONES X-PRESS CHANGE KWIK SWITCH 100 x AF COLLET CHUCK 95121

  • Fairfield, Iowa, United States
  • Jun 9th
NMTB40 DA180 CNC Collet Chuck Holder with DA180 3/16" Erickson Spring Collet

NMTB40 DA180 CNC Collet Chuck Holder with DA180 3/16" Erickson Spring Collet

  • Thousand Oaks, California, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies