Balanbot Balance Robot Diy Self Balancing Robot Kit Arduino Compatible

US $98.80

??????????, ???, China
Jun 9th

Open on mobile:
QR code

Note: Lipo battery pack is not included by default for shipping safe. You can us 3S Lipo battery pack. It's Arduino Compatible! Get the complete Balanbot kit except for the battery, charger. In this case you are safe to recieve your robot . The included items are the controller board, Bluetooth dongle, two geared motors with encoders, wheels and hubs and mechanical parts. Get the complete Balanbot kit except for the battery, charger. In this case you are safe to recieve your robot . The included items are the controller board, Bluetooth dongle, two geared motors with encoders, wheels and hubs and mechanical parts. The main board of the Balanbot kit consists of an Atmel 8-bit ATmega1284P AVR microcontroller running at 10MHz and with 128KB flash, 16KB RAM and 4KB EEProm. To enable the integration with the Arduino programming environment the board contains an FTDI USB to Serial converter chip, the FT232. This chip can be used for Arduino programming as well as Serial debugging. The onboard 6-axis IMU is an MPU-6050, which is connected to the microcontroller using the I2C bus. This digital IMU contains a 3-axis accelerometer and a 3-axis gyroscope, and when combined with a Kalman filter it gives you some very stable angle readings. To enable the USB Host support for the Bluetooth controllers etc. the Maxim MAX3421E has been used. This chip is connected to the microcontroller with an SPI interface together with some control signals. On each side of the main board there is a digital H-bridge motor controller IC, the VNH5180, capable of driving up to 8A continous current. Even though the stall-current of the supplied gearmotors is only 5A the VNH5180 gives you some extra room for security and expansion. Both the power for the motors and the main board is supplied through the input screw terminal, where the supplied plug-leads that are connected to the battery are to be connected. An onboard polarity-protection circuitry protects the board against damage that would have been caused by connecting the battery in the reverse direction. The board also contains a buzzer on a PWM pin and an onboard LED. The remaining I/O pins on the microcontroller have been broken out in two female pin headers for easy expandability. These two female headers include 1x UART, 4x PWM outputs, 1x Interrupt and 5x Analog inputs. The pins used for I2C communication have been broken out as well. Features Self-balancing The onboard sensor (6-axis IMU) is used to keep the robot balanced automatically at all times. The Balanbot will keep itself balanced right out of the box due to the highly optimized, tuned and preprogrammed PID loop used in the balancing-software controller-algorithm. By combining accelerometer, gyroscope and rotary encoder data, the Balanbot is able to keep itself balanced even when pushed. Arduino-compatible The Balanbot is compatible with the Arduino IDE, thanks to the onboard ATmega1284P microcontroller. This means that you can upload new code and add your own features to the Balanbot in the well-known Arduino environment. The ATmega1284P has a flash size of 128KB of which approximately 127KB are at your disposal. When the full Balanbot firmware is programmed into the main board, including support for the most popular game controllers, approximatly half of the flash is used, leaving around 64KB of flash left for you to expand. However, it is relatively easy to modify the original Balanbot firmware to exclude unused controllers, thereby significantly reducing the code size. USB Host capability - including Bluetooth controllers You can continuing the development of the USB Host controller library for the Arduino, adding support to many new periphirals. By inserting the Bluetooth USB dongle that comes with the kit, you can control the Balanbot using our application for both Windows, Mac and Linux. Furthermore you can control the Balanbot with your Android phone by installing our application. With all of the above applications you are wirelessly able to change various settings, including the PID values and maximum speed, and see the IMU data. For more information see wiki:duinopeak dot com/wiki/index.php?title=Balanbot_v1.0_en 1 set Balanbot Kit without 3s Lipo battery. Items' delivery ratio Country Delivery Time Working Days (not including holiday) 5-7 8-11 12-14 15-19 20-30 Working Days + Saturday + Sunday 5-12 13-16 17-20 21-25 26-37 United States Rate (item arrived) 5.1% 50.1% 29.6% 10.5% 4.7% United Kingdom Rate (item arrived) 9.9% 63.2% 19.1% 3.4% 4.4% Australia Rate (item arrived) 21.4% 50.0% 14.3% 7.2% 7.1% France Rate (item arrived) 10.5% 28.6% 43.8% 10.1% 7.0% Germany Rate (item arrived) 11.1% 22.2% 30.3% 20.9% 15.5% Canada Rate (item arrived) 0.0% 47.1 31.4% 17.6% 3.9% Other Countries Rate (item arrived) 3.5% 25.0% 47.9% 12.9% 10.7%

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Duinopeak
MPN	DP_ROBOT_BALANBOT_01
UPC	Does not apply