+ Post new Ad
Ball Turning Attachment For Lathe Machine - Metalworking Tools with carbide tip, C $80.89 – Picture 0
Ball Turning Attachment For Lathe Machine - Metalworking Tools with carbide tip, C $80.89 – Picture 0

Ball Turning Attachment For Lathe Machine - Metalworking Tools With Carbide Tip

C $80.89

  • DELHI, DELHI, India
  • Jun 6th
Open on mobile:
QR code
GURUNANAK INTERNATIONALA ball turning attachment is really just a mechanism that cause the cutting edge to follow a circular path which is the outside of the ball being cut. ... The cutting edge can turn in the horizontal plane or it can turn in a vertical plane lying along the axis of the lathe.. Description :- This fits straight onto the cross slide of your lathe machine for Quick Turning of Cones and Balls. Comes with a 1 Index able TNMG16 Insert for best turning finish and results. Maximum Ball Diameter possible is 38 mm. The Head can be adjusted for different Ball Sizes. We will not be responsible for any import duties. If item comes under custom then buyers will be fully responsible for any charges we don't accept return or refund in this case. We will not pay any import duties. If the item will stuck in custom we will not pay refund or accept returns.  Note:- If item comes under custom then buyer will be full fully responsible for custom charges, we as a seller will not accept return or refund request
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Modified Item No
MPN Does Not Apply
Country/Region of Manufacture India
Brand Unbranded
Custom Bundle No
UPC Does not apply

Directions

Similar products from Supporting Blocks & Sets

Brown & Sharpe Universal Precision 1-2-3 Setup Block Set Brand New Free S&H

Brown & Sharpe Universal Precision 1-2-3 Setup Block Set Brand New Free S&H

  • Norwich, Connecticut, United States
  • Jun 14th
Machinist V Block The Lufkin Rule Co. No. 905 1/4 - 20 U.S.S.

Machinist V Block The Lufkin Rule Co. No. 905 1/4 - 20 U.S.S.

  • Cape Neddick, Maine, United States
  • Jun 12th
Wrench Angle gauge block Tool Driller Equipment Milling Practical Durable

Wrench Angle gauge block Tool Driller Equipment Milling Practical Durable

  • suzhou, China
  • Jun 11th
1 Lot of Machinists Step Blocks (Inv.38790)

1 Lot of Machinists Step Blocks (Inv.38790)

  • Portland, Connecticut, United States
  • Jun 9th
Set of 2 Taft-Peirce V Blocks - Style - 9128 - No. 333C - Original Box Clean

Set of 2 Taft-Peirce V Blocks - Style - 9128 - No. 333C - Original Box Clean

  • Summerville, South Carolina, United States
  • Jun 9th
Machine Tool Lot; 2 Set Up Blocks, 2 Surface Inspection Tool Holders. Used.

Machine Tool Lot; 2 Set Up Blocks, 2 Surface Inspection Tool Holders. Used.

  • Summitville, Indiana, United States
  • Jun 9th
Starrett 268 V Block with Clamp

Starrett 268 V Block with Clamp

  • Chino Hills, California, United States
  • Jun 8th
2-1/2 x 2 x 2 Magnetic V- Block with 2 V-Blocks 1-5/8 x 1-1/14 x 1-1/4

2-1/2 x 2 x 2 Magnetic V- Block with 2 V-Blocks 1-5/8 x 1-1/14 x 1-1/4

  • Punta Gorda, Florida, United States
  • Jun 7th
MILLED Receiver Drilling Fixture V2

MILLED Receiver Drilling Fixture V2

  • Sheboygan, Wisconsin, United States
  • Jun 6th
Milling Clamping Block Durable 25x50x75mm Milling Block Hardened Steel Milling

Milling Clamping Block Durable 25x50x75mm Milling Block Hardened Steel Milling

  • Shenzhen, China
  • Jun 6th
TWO SHOP MADE HARDENED V BLOCKS MILLING AND GRINDER

TWO SHOP MADE HARDENED V BLOCKS MILLING AND GRINDER

  • Blairstown, New Jersey, United States
  • Jun 5th
2 machinist blocks of some sort

2 machinist blocks of some sort

  • Ormond Beach, Florida, United States
  • Jun 3rd
Engineers Vee Block Clamp Set - V Block set of two pc 1-5/8" x 1-1/4" x 1-1/4"

Engineers Vee Block Clamp Set - V Block set of two pc 1-5/8" x 1-1/4" x 1-1/4"

  • Delhi, Delhi, India
  • Jun 3rd
Engineers Vee Block Clamp Set - V Block set of two pc 32x32x40mm Hardened Ground

Engineers Vee Block Clamp Set - V Block set of two pc 32x32x40mm Hardened Ground

  • Delhi, Delhi, India
  • Jun 3rd
Machinist v block with clamp 1 3/8"L x 1 3/8"W x 1 1/8"H

Machinist v block with clamp 1 3/8"L x 1 3/8"W x 1 1/8"H

  • New Britain, Connecticut, United States
  • Jun 1st
Brown & Sharpe Ultra Precision Ground 1-2-3 Block Sets 599-750-10 - see text.

Brown & Sharpe Ultra Precision Ground 1-2-3 Block Sets 599-750-10 - see text.

  • Northbrook, Illinois, United States
  • Jun 1st
The L.S. Starrett Co. V-Blocks No. 271 0766 + Bar + Clamp Excellent Set Vintage

The L.S. Starrett Co. V-Blocks No. 271 0766 + Bar + Clamp Excellent Set Vintage

  • Westcliffe, Colorado, United States
  • May 31st
Pair of LS Starrett 268 V Blocks + 1 Clamp

Pair of LS Starrett 268 V Blocks + 1 Clamp

  • Waynesboro, Virginia, United States
  • May 31st
VINTAGE 1 1/2" INCH Machinist V Block BROWN & SHARPE # 31 With CLAMP JEWELER

VINTAGE 1 1/2" INCH Machinist V Block BROWN & SHARPE # 31 With CLAMP JEWELER

  • Lehigh Acres, Florida, United States
  • May 30th
V-BLOCK SET 50 x 38 x 38 WITH 2 BLOCKS & 2 CLAMPS

V-BLOCK SET 50 x 38 x 38 WITH 2 BLOCKS & 2 CLAMPS

  • delhi, India
  • May 28th

People who viewed this item also vieved

MT5 Morse Taper MT 5 Precision Live Center Centers #5

MT5 Morse Taper MT 5 Precision Live Center Centers #5

  • San Gabriel, California, United States
  • Jan 30th
Rohm live center 08 MK4 w/ Jacobs # 11 N 2JT drill chuck and extras

Rohm live center 08 MK4 w/ Jacobs # 11 N 2JT drill chuck and extras

  • Montebello, California, United States
  • Jan 30th
NICE!! ROHM 4MT MORSE TAPER LIVE CENTER FOR LATHE #MK4

NICE!! ROHM 4MT MORSE TAPER LIVE CENTER FOR LATHE #MK4

  • Chino, California, United States
  • Jan 30th
WALKER MAGNETIC CHUCK 12 X 48 FINE POLE 230 VOLT

WALKER MAGNETIC CHUCK 12 X 48 FINE POLE 230 VOLT

  • Waterbury, Connecticut, United States
  • Jan 30th
BUCK 12" 4 JAW CHUCK D1-8 NICE!

BUCK 12" 4 JAW CHUCK D1-8 NICE!

  • Edison, New Jersey, United States
  • Jan 30th
Straight Shank Collet Chuck Holder ER20 3/4" shank .750"

Straight Shank Collet Chuck Holder ER20 3/4" shank .750"

  • Warren, Michigan, United States
  • Jan 30th
Jorgensen 4" C-Clamp #104 Made in USA

Jorgensen 4" C-Clamp #104 Made in USA

  • Union Grove, Wisconsin, United States
  • Jan 30th
NEW ROSE KRIEGER RXE.1010 CLAMP HOSE TUBING ROUND 1IN D267716

NEW ROSE KRIEGER RXE.1010 CLAMP HOSE TUBING ROUND 1IN D267716

  • Delta, Ohio, United States
  • Jan 30th
Good Hand GH-20235 gh20235 750lbs 340kg holding toggle clamp red handle

Good Hand GH-20235 gh20235 750lbs 340kg holding toggle clamp red handle

  • Notre-Dame-de-la-Paix, Quebec, Canada
  • Jan 30th
Straight Shank Collet Chuck ER11A(Hexagon)*12mmSHK*100mm Length,for ER11 Collet

Straight Shank Collet Chuck ER11A(Hexagon)*12mmSHK*100mm Length,for ER11 Collet

  • GuangDong, China
  • Jan 30th
SHARS 5/8" Keyless Drill Chuck with Morse Taper 4 Integral Shank Arbor MT4 4MT

SHARS 5/8" Keyless Drill Chuck with Morse Taper 4 Integral Shank Arbor MT4 4MT

  • Saint Charles, Illinois, United States
  • Jan 30th
MarkRite Stamp Works 1/32 inch Steel Figures 9 Piece Set

MarkRite Stamp Works 1/32 inch Steel Figures 9 Piece Set

  • Burlington, North Carolina, United States
  • Jan 30th
500DA0875 7/8 DA Collet Erickson Brand 1pc

500DA0875 7/8 DA Collet Erickson Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
Machinists 12/17FP BUY NOW Brand New 11/16 R8 Collet

Machinists 12/17FP BUY NOW Brand New 11/16 R8 Collet

  • Lutz, Florida, United States
  • Jan 30th
COLLET TG150 CARBOLOY 23/32" COLLET #7128

COLLET TG150 CARBOLOY 23/32" COLLET #7128

  • Resaca, Georgia, United States
  • Jan 30th
NOS Eclipse UK 924 Vee Magnetic 90 Degree Machinists Fabricator Mitre Clamp #012

NOS Eclipse UK 924 Vee Magnetic 90 Degree Machinists Fabricator Mitre Clamp #012

  • Perth, Ontario, Canada
  • Jan 30th
NOS Eclipse Magnetics UK #923 Machinists 90 Degree Magnetic Mitre Clamp 011

NOS Eclipse Magnetics UK #923 Machinists 90 Degree Magnetic Mitre Clamp 011

  • Perth, Ontario, Canada
  • Jan 30th
WELDING TABLE, BIG 128in x 48in x 30in high, 1.0 IN THICK AL TOP, HVY ST FRAME

WELDING TABLE, BIG 128in x 48in x 30in high, 1.0 IN THICK AL TOP, HVY ST FRAME

  • New Stanton, Pennsylvania, United States
  • Jan 30th
Vulcan Heavy Duty Forge Mill Hold Down Clamps 6” 2 Pcs, 4” 1 Pcs

Vulcan Heavy Duty Forge Mill Hold Down Clamps 6” 2 Pcs, 4” 1 Pcs

  • Olathe, Kansas, United States
  • Jan 30th
Vulcan RT6171 Heavy Duty Forge Mill Hold Down Clamps 2 Pcs

Vulcan RT6171 Heavy Duty Forge Mill Hold Down Clamps 2 Pcs

  • Olathe, Kansas, United States
  • Jan 30th
Vulcan #56 Heavy Duty Forge Mill Hold Down Clamps 6” Long 2 Pcs

Vulcan #56 Heavy Duty Forge Mill Hold Down Clamps 6” Long 2 Pcs

  • Olathe, Kansas, United States
  • Jan 30th
ROTAB 36" POWERED TILTING ROTARY TABLE

ROTAB 36" POWERED TILTING ROTARY TABLE

  • Santa Cruz, California, United States
  • Jan 30th
Cushman / Hartford Super Spacer 12" Rotary Table Indexer Mill Milling

Cushman / Hartford Super Spacer 12" Rotary Table Indexer Mill Milling

  • Wilmington, Ohio, United States
  • Jan 30th
Nikken 5AX-300 CNC Rotary Tilting Table

Nikken 5AX-300 CNC Rotary Tilting Table

  • Des Plaines, Illinois, United States
  • Jan 30th
KURT II 6" VISES

KURT II 6" VISES

  • Orange, California, United States
  • Jan 30th
Very Nice 4" Palmgren Milling Vise w Swivle Base -Low Profile Vise

Very Nice 4" Palmgren Milling Vise w Swivle Base -Low Profile Vise

  • Jackson, Mississippi, United States
  • Jan 30th
4" Vise Brass Soft Jaw with Magnet Sold by Pair-New

4" Vise Brass Soft Jaw with Magnet Sold by Pair-New

  • Chino, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies