Barnstead Super Nuova Sp131820-33 7x7 Hot Plate Stirrer Thermo Scientific

US $399.99

  • Lake Forest, Illinois, United States
  • Feb 22nd
Barnstead  Super Nuova  SP131820-33  7x7  Hot Plate Stirrer  Thermo Scientific  220-240 Volt This unit uses non-standard voltage (220-240).  I've included pictures of the plugs. 7" X 7" Width  8.2” (20.8 cm) Height 3.8” (9.7 cm) Depth 13.0” (33.0 cm) Weight lbs (kg) 11.0 lbs (5.0 kg) Volts 220-240 amps 3.0 Watts 710 freq. 50/60 Phase 1 Max. Temp. 698°F (370°C) Heating Specifications Top Plate Surface - Solid Ceramic Temperature range: 1°C - 370°C (34°F - 698°F)* * This stirring hot plate does not cool. The minimum temperature is 1°C if used in a cold room below 1°C. Heat-up time to within 5°C of maximum temperature (unloaded top plate). 5 minutes Accuracy of the temperature display vs. the actual average temperature ± 10.0°C - Temperature stability at the center of the top plate surface (@ 100°C unloaded). ± 1.0°C Stirring Speed Specifications Speed Range 50 to 1200 RPM (Maximum speed is dependent on the viscosity of the solution) Stability of the stirring speed setpoint (600 ml of water in a 1000 ml glass flask above 200 rpm) ± 2.0% Accuracy of the stirring setpoint (600 ml of water in a 100 ml glass flask above 200 rpm) ± 2.0% Top Plate Size Max recommended flask Size Max Weight on Top Plate 7" x 7" 4 liters 25 lbs External probe is not included.  What you see in the pictures is what you get. Your SUPER-NUOVA stirring hot plate is a heating and/or stirring plate designed for laboratory procedures requiring precise control of temperature and/or stirring speed. Each SUPER-NUOVA model includes a digital display for monitoring temperature and/or stirring speed, and the stirring hot plate models have dual displays so temperature and stirring speed can be monitored simultaneously. The hot plate is capable of producing accurately controlled top plate temperatures from 1°C through 370°C. The temperature is controlled at the plate surface by an internal Type K thermocouple sensor, or the solution temperature may be controlled by utilizing the included 6" PFA encapsulated ungrounded stainless steel Type K thermocouple probe. A 6" or 10" general purpose stainless steel immersion probe, or a chemical-resistant 7" solid Teflon® immersion probe may be ordered separately. The stirrer will accurately maintain stirring speeds from 50 rpm up to 1200 rpm. On stirring hot plate models, the accessory probe may also be utilized to display the actual temperature of heat-sensitive solutions during stirring-only functions. The top plate on the SUPERNUOVA units are solid ceramic, and are suitable for use with glass or metal vessels and sand baths. Other features of the SUPER-NUOVA include a timer that can be used to shut off stirring, heating or both. Specific temperature or stirring speed setpoints may be set using the PRESETS buttons on the SUPER-NUOVA. An over temperature protection (OTP) circuit can be set using the adjustment on the front face of the unit. The OTP can be displayed in the service menus. See “Service and Calibration.”
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Thermo Scientific
MPN SP131820-33
Model Super Nuova

Directions

Similar products from Agitators & Churns

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies