Battery Protection BMS PCB Board for 10 Packs 36V Li-ion Cell max 30A w/ Balance, US $15.58 – Picture 0

Battery Protection BMS PCB Board for 10 Packs 36V Li-ion Cell max 30A w/ Balance, US $15.58 – Picture 1

Battery Protection BMS PCB Board for 10 Packs 36V Li-ion Cell max 30A w/ Balance, US $15.58 – Picture 2

Battery Protection Bms Pcb Board For 10 Packs 36v Li-ion Cell Max 30a W/ Balance

US $15.58

???, ???, China
Jun 9th

Open on mobile:
QR code

Description View the test capacity, test time, and the current voltage 1.PressON / OFFKey to enter the test status (working conditionLEDLights flash) 2.WorkDOWNAndUPKey to switch the display, respectively, view the current voltage (V), The capacity of the test (AH), Test time (Hour),Shows the voltage drops below the set voltage, automatically switches to the test completion status. 3. PressON / OFFBond3Seconds, then empty the test data back to standby. Precautions 1.When the battery is discharged, do not set the battery voltage0.00VAvoid battery damage 2.Maximum test voltage8.99VDo not exceed this voltage. Test voltage range:0.01V ~ 8.99V 3.Testing process PressON / OFFKey to switch to the test completion status 4.Battery discharge time (Hour) Is the longest:9.59HHere's the time format:9.59HExpressed9Hour59Points. Discharge time:0.00H ~ 9.59H 5.The maximum capacity of the battery (AH) Is:99.9AHBattery capacity range:0.00AH ~ 99.9AH 7. Discharge process, when the temperature is higher than60 CCooling fan to work, less than40 CWhen the fan stops 8. 5V USBAfter working state powerLEDLights in three ways: Work like Off: Standby Work like lights flash: being tested Work like lights lit: the test is completed, the buzzer alarm Illustration Example: Testing a18650Lithium battery capacity, the minimum discharge voltage is set3.00V, The discharge current is set to1A. 1. USB 5VPower supply, the module enters the standby state. 2.Load18650Lithium battery, the module shows the battery voltage. 3.PressSETButton, LED indicator light flashes, withDOWN,UPKey to set the minimum cut-off discharge voltage and discharge current,3.00V,1A. 4.PressON / OFFButton to save the settings. 5.The current access the battery voltage is displayed, pressON / OFFButton to start the discharge, work statusLEDLights flashing, battery voltage slowly drop, after the voltage drops below the set stop discharging into the test completion status. 6.Buzzer, work statusLEDLight Always. 7.Shows the voltage will rise,DownAndUPKey to toggle the display of data access test results. 8.PressON / OFFKey data is cleared to return to standby package include ; 1pcs 18650 Li-Ion Lithium Battery Mobile Power Capacity Tester Module not include battery and battery holder

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded/Generic
MPN	Does Not Apply
Model	new
Country/Region of Manufacture	China
UPC	Does not apply