+ Post new Ad
BEARINGS - for a VINTAGE DELTA 6" JOINTER'S CUTTER HEAD - SET OF 2, US $28.25 – Picture 0
BEARINGS - for a VINTAGE DELTA 6" JOINTER'S CUTTER HEAD - SET OF 2, US $28.25 – Picture 0

Bearings - For A Vintage Delta 6" Jointer's Cutter Head - Set Of 2

US $28.25

  • Freeland, Michigan, United States
  • Jul 9th
Open on mobile:
QR code
BRAND NEW CUTTER HEAD BEARINGS FOR A VINTAGE DELTA 6" JOINTER. THIS SALE IS FOR A SET OF TWO HIGH QUALITY BEARINGS, BOTH WITH EXTENDED INNER RACES.     THE OUTBOARD SIDE BEARING AND THE PULLEY SIDE BEARING ARE DIFFERENT FOR A VINTAGE DELTA 6" JOINTER.    The outboard bearing dimensions are 35mm OD X 15mm ID X 11mm width at the outer race and 12.7mm width at the inner race. The pulley side bearing dimensions are 40mm OD X 17mm ID X 11.99mm width at the outer race and 14.288mm width at the inner race.   THE EARLY IDENTIFYING NUMBERS FOR THESE BEARINGS WOULD HAVE BEEN 87502 AND 87503. THESE BEARINGS ARE FACTORY LUBRICATED AND COME WITH ONE SIDE DOUBLE SEALED, ONE SIDE WITH AN EXTENDED RACE, AND THE OTHER SIDE SHIELDED  .... TO MATCH THE OEM BEARINGS. Shipping for thIs set of bearings is $5.00 to anywhere in the lower 48 states. Other locations may have to pay an additional shipping fee. Payment by PayPal is preferred.  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture Unknown
Brand WJB
MPN 87502/87503

Directions

Similar products from Other Woodworking Equipment & Tools

Hickory Woodworking RBK1030, 24-2=22 Carbide Master Set, 1/4" Shank Router Bits

Hickory Woodworking RBK1030, 24-2=22 Carbide Master Set, 1/4" Shank Router Bits

  • Gurnee, Illinois, United States
  • Jul 10th
shopsmith 1/2” combo blade NOS

shopsmith 1/2” combo blade NOS

  • North Anson, Maine, United States
  • Jul 10th
Shopsmith Greenie miter gauge

Shopsmith Greenie miter gauge

  • North Anson, Maine, United States
  • Jul 10th
1X(5 Meters GT2 timing belt width 6mm Fit for RepRap Mendel Rostock Prusa

1X(5 Meters GT2 timing belt width 6mm Fit for RepRap Mendel Rostock Prusa

  • Pennsylvania, United States
  • Jul 10th
Shaper Cutter 1/4" Groove 3/4" Bore With 1/2" Bushing Code No. CT 18

Shaper Cutter 1/4" Groove 3/4" Bore With 1/2" Bushing Code No. CT 18

  • Boyce, Virginia, United States
  • Jul 10th
1pc Heating Incubator Heater Element Plate for Mini Bird Egg Incubator

1pc Heating Incubator Heater Element Plate for Mini Bird Egg Incubator

  • Shenzhen, China
  • Jul 10th
Mirka 22-622-040 Basecut 6” grip Discs 50/box

Mirka 22-622-040 Basecut 6” grip Discs 50/box

  • Phoenix, Arizona, United States
  • Jul 10th
Shop Fox D4572 Upper Dust Collection Bag, 2.5 Micron

Shop Fox D4572 Upper Dust Collection Bag, 2.5 Micron

  • New York, United States
  • Jul 9th
Amana Tool 46350-K CNC SC Spektra Extreme Tool Life Coated Mortise Compression S

Amana Tool 46350-K CNC SC Spektra Extreme Tool Life Coated Mortise Compression S

  • New York, United States
  • Jul 9th
Amana Tool - SC587 Carbide Tipped 3-Wing Beveled Reversible Stile Rail 2-13/32

Amana Tool - SC587 Carbide Tipped 3-Wing Beveled Reversible Stile Rail 2-13/32

  • New York, United States
  • Jul 9th
Dust Dust Cover Brush Collection Cover Black / Beige Brush High quality

Dust Dust Cover Brush Collection Cover Black / Beige Brush High quality

  • suzhou, China
  • Jul 9th
Kreg Foreman Pocket-Hole Machine

Kreg Foreman Pocket-Hole Machine

  • Clear Lake, Iowa, United States
  • Jul 9th
Yonico Professional Router Bits Lot

Yonico Professional Router Bits Lot

  • Prescott, Arizona, United States
  • Jul 9th
Delta Adapter Router Bit Collet Chuck Wood Shaper 43-800 1/4 1/2" Molding Trim

Delta Adapter Router Bit Collet Chuck Wood Shaper 43-800 1/4 1/2" Molding Trim

  • McLemoresville, Tennessee, United States
  • Jul 9th
Freud 1/2" Diameter Flush Trim Bit with Bearing with " Shank (42-104)

Freud 1/2" Diameter Flush Trim Bit with Bearing with " Shank (42-104)

  • Middletown, New York, United States
  • Jul 9th
Router Boots W/Screw 1 Set 70/75/80/85/90/100mm CNC Cleaner Brush Dust Removal

Router Boots W/Screw 1 Set 70/75/80/85/90/100mm CNC Cleaner Brush Dust Removal

  • suzhou, China
  • Jul 9th
Delta Adapter Stub Short Spindle Shaft Wood Shaper 43-809 3/4" Molding Trim Vtg

Delta Adapter Stub Short Spindle Shaft Wood Shaper 43-809 3/4" Molding Trim Vtg

  • McLemoresville, Tennessee, United States
  • Jul 9th
Shopsmith Mark V 500/510/520 Extension Table Base, Great Shape!!

Shopsmith Mark V 500/510/520 Extension Table Base, Great Shape!!

  • Nevada City, California, United States
  • Jul 9th
Incra I-Box Jig for Box Joints

Incra I-Box Jig for Box Joints

  • Lynchburg, Ohio, United States
  • Jul 9th
Shopsmith Mark V Feather Board, Free Shipping!! Safety tool

Shopsmith Mark V Feather Board, Free Shipping!! Safety tool

  • Spartanburg, South Carolina, United States
  • Jul 9th

People who viewed this item also vieved

Band saw blade Dart 1/4x.025x4 Claw 144. " Welded Blade New

Band saw blade Dart 1/4x.025x4 Claw 144. " Welded Blade New

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Badger Wisconsin Knife Works High Speed Steel 3 Blade Salesman Sample

Badger Wisconsin Knife Works High Speed Steel 3 Blade Salesman Sample

  • Germantown, Tennessee, United States
  • Jan 30th
reciprocating saw blade dewalt 12

reciprocating saw blade dewalt 12

  • Staten Island, New York, United States
  • Jan 30th
Superior Works Layout Tool Cocobolo Handle Striking Knife Spearpoint USED

Superior Works Layout Tool Cocobolo Handle Striking Knife Spearpoint USED

  • Byron, California, United States
  • Jan 30th
MACHINIST LATHE Lot of Henry Taylor Wood Carving Gouge Chisel s VERY CLEAN

MACHINIST LATHE Lot of Henry Taylor Wood Carving Gouge Chisel s VERY CLEAN

  • Morris Plains, New Jersey, United States
  • Jan 30th
Freud Professional Woodworking Carving Tools Set. # CS 112

Freud Professional Woodworking Carving Tools Set. # CS 112

  • Shrewsbury, Massachusetts, United States
  • Jan 30th
Bessey D-BKPH SET Folding Utility Knife Set - ABS Comfort Grip Handle

Bessey D-BKPH SET Folding Utility Knife Set - ABS Comfort Grip Handle

  • Winona, Minnesota, United States
  • Jan 30th
Bessey MMS-12 0-12" Light Duty Mighty Mini Bar Clamp

Bessey MMS-12 0-12" Light Duty Mighty Mini Bar Clamp

  • Winona, Minnesota, United States
  • Jan 30th
Pony Clamp # 3325, three way 2 1/2"

Pony Clamp # 3325, three way 2 1/2"

  • Coventry, Rhode Island, United States
  • Jan 30th
MATCO TOOLS DB29TM TURBOMAX DRILL BIT SET 29 PIECES

MATCO TOOLS DB29TM TURBOMAX DRILL BIT SET 29 PIECES

  • Carlisle, Pennsylvania, United States
  • Jan 30th
16 Piece Wood Boring Set

16 Piece Wood Boring Set

  • Auburn, Maine, United States
  • Jan 30th
3/8 x 6 SDS Plus Huge Lot Of 33

3/8 x 6 SDS Plus Huge Lot Of 33

  • Venice, Florida, United States
  • Jan 30th
Mahogany (African) wood veneer 2.5" x 17.5" with no backer (raw unbacked veneer)

Mahogany (African) wood veneer 2.5" x 17.5" with no backer (raw unbacked veneer)

  • Louisville, Kentucky, United States
  • Jan 30th
Mahogany (African) wood veneer 3.5" x 17.5" with no backer (raw unbacked veneer)

Mahogany (African) wood veneer 3.5" x 17.5" with no backer (raw unbacked veneer)

  • Louisville, Kentucky, United States
  • Jan 30th
White oak pre-glued Wood Veneer edge banding 13/16"x250'

White oak pre-glued Wood Veneer edge banding 13/16"x250'

  • East Meadow, New York, United States
  • Jan 30th
Atlas/Craftsman 6" Metal Lathe 101.21200 Service Manual Parts Lists Schematics

Atlas/Craftsman 6" Metal Lathe 101.21200 Service Manual Parts Lists Schematics

  • Naperville, Illinois, United States
  • Jan 30th
Logan 10" Lathe Models 200, 201, 210, 211 Owners Service Manual Parts Lists etc.

Logan 10" Lathe Models 200, 201, 210, 211 Owners Service Manual Parts Lists etc.

  • Naperville, Illinois, United States
  • Jan 30th
TRANSISTORIZED GEIGER COUNTER PLANS RADIOACTIVITY ORIGINAL

TRANSISTORIZED GEIGER COUNTER PLANS RADIOACTIVITY ORIGINAL

  • Feasterville-Trevose, Pennsylvania, United States
  • Jan 30th
3/16” Half Bullnose Diamond Router Bit–Grit 50/60 - Wood Use Only (#91)

3/16” Half Bullnose Diamond Router Bit–Grit 50/60 - Wood Use Only (#91)

  • Maple Lake, Minnesota, United States
  • Jan 30th
1/4” Half Bullnose Diamond Router Bit–Grit 50/60 - Wood Use Only (#92)

1/4” Half Bullnose Diamond Router Bit–Grit 50/60 - Wood Use Only (#92)

  • Maple Lake, Minnesota, United States
  • Jan 30th
20mm Full Bullnose Diamond Router Bit–Grit 30/40 - Wood Use Only (#149)

20mm Full Bullnose Diamond Router Bit–Grit 30/40 - Wood Use Only (#149)

  • Maple Lake, Minnesota, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies