Beckhoff BK 5210 Economy Bus Coupler (1007B6080000), US $35.00 – Picture 0

Beckhoff BK 5210 Economy Bus Coupler (1007B6080000), US $35.00 – Picture 1

Beckhoff BK 5210 Economy Bus Coupler (1007B6080000), US $35.00 – Picture 2

Beckhoff BK 5210 Economy Bus Coupler (1007B6080000), US $35.00 – Picture 3

Beckhoff BK 5210 Economy Bus Coupler (1007B6080000), US $35.00 – Picture 4

Beckhoff BK 5210 Economy Bus Coupler (1007B6080000), US $35.00 – Picture 5

Beckhoff Bk 5210 Economy Bus Coupler (1007b6080000)

US $35.00

Morristown, New Jersey, United States
Mar 6th

Open on mobile:
QR code

BK5210 Bus Couplers connect the DeviceNet bus system to the electronic terminal blocks, which can be extended in modular fashion. One unit consists of one Bus Coupler, any number of up to 64 terminals and one end terminal. The BK5210 "Economy" variant permits particularly economical creation of peripheral interfacing connections. Up to 64 digital input/output terminals can be connected. The Bus Coupler operates on the basis of the CAN protocol. The DeviceNet standard on which the BK52x0 Bus Coupler is based allows the operation of diverse DeviceNet devices in one network. DeviceNet is based on a definition of communication objects for the exchange of data from the sensor/actuator area that is especially oriented to automation technology. The Bus Couplers and Bus Terminals can be parameterised on a PC using the KS2000 configuration set. Commissioning is also possible without the KS2000. Complex signal processing for analog I/Os, position measurement, … The BK5200 and BK5220 Bus Couplers support the operation of all Bus Terminals. As far as the user is concerned, handling of the analog inputs/outputs is not different to other series. The information is available in the process image of the controller for processing in the form of a byte array. The analog and multi-functional Bus Terminals can be adapted to each specific application using the KS2000 configuration set. Depending on the type, the analog Bus Terminals' registers contain temperature ranges, gain values and linearisation characteristics. With the KS2000, the required parameters can be set on a PC. The Bus Terminals store settings permanently and in a fail-safe manner. Optionally, the Bus Terminals can also be controlled by the control system. Via function blocks (FBs), the programmable logic controller (PLC) or the Industrial PC (IPC) handles configuration of the complete periphery during the start-up phase. If required, the controller can upload the decentrally created configuration data in order to centrally manage and store this data. Therefore, new adjustments are not necessary in the event of replacement of a Bus Terminal. Corresponding EDS data files are available for DeviceNet configuration tools. System data DeviceNet | BK5200, BK5210, BK5220 Number of I/O stations 64 Data transfer medium screened, twisted copper wire with power supply, 5-pin Max. cable length 500 m 250 m 100 m Data transfer rates 125 kbaud 250 kbaud 500 kbaud Operating modes bit strobe, polling, cyclic, change of state (COS) DeviceNet type communications adapter Technical data BK5200 BK5210 BK5220 Number of Bus Terminals 64 64 64 (255 with K-bus extension) Max. number of bytes fieldbus 512 byte input and 512 byte output 32 byte input and 32 byte output 512 byte input and 512 byte output Digital peripheral signals 512 inputs/outputs 256 inputs/outputs 1,020 inputs/outputs Analog peripheral signals 256 inputs/outputs – 256 inputs/outputs Configuration possibility via KS2000 or the controller Data transfer rates via Dip switch via Dip switch automatic detection Bus interface 1 x open pluggable connector, 5-pin, included Power supply 24 V DC (-15 %/+20 %), through bus cable 11…25 V (conforms to DeviceNet specification) Input current 70 mA + (total K-bus current)/4, 500 mA max. Starting current approx. 2.5 x continuous current Recommended fuse

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Beckhoff
MPN	BK 5210
Model	Bus Coupler 1007B6080000
Country/Region of Manufacture	United States