Beckman Centrifuge Rotor Type 50.2 Ti, Fixed Angle, Titanium 12x39ml, 50k Rpm

US $555

Orem, Utah, United States
Oct 19th

Open on mobile:
QR code

Beckman Centrifuge Rotor Type 50.2 Ti, Fixed Angle, Titanium 12x39mL, 50k rpm 302,000xg Returns: Accepted within 30 Days* / 365 Day Warranty** Resale Price $3800 Cleaned & Disinfected in accordance to Medical Guidelines. USED: Fully Functional, Average Signs of Use, Clean, Rubber Gaskets could be replaced (there are signs of minute cracks in gaskets), No Major Imperfections. The Type 50.2 Ti, rated for 50 000 rpm, is a fixed angle rotor designed to centrifuge up to twelve tubes at a 24-degree angle to the axis of rotation. Used in Beckman Coulter class H, R, and S preparative ultracentrifuges, the rotor develops centrifugal forces sufficient for the differential separation of particles, and for equilibrium sedimentation of particles such as DNA and viruses. Up to 468 mL of gradient and sample volume can be centrifuged per run. The rotor is made of titanium and is finished with black polyurethane paint. The aluminum lid and handle are anodized for corrosion resistance. O-rings made of Buna N rubber in the lid and handle maintain atmospheric pressure inside the rotor during centrifugation, if they are properly lubricated. Four small holes in the lid provide a temporary vent, preventing pressure build-up and extrusion of the large lid O-ring in the event of tube leakage. Because of the weight of the rotor, drive pins are not required in the rotor drive hub cavity. For overspeed protection, a photoelectrical detector in the ultracentrifuge monitors the overspeed disk on the rotor bottom and shuts down the run if speeds exceeding 50 000 rpm are detected. UNSPSC: 41103909 Rotor Type: Ultra - Fixed Angle Maximum Speed: 50,000 rpm Maximum RCF at r max (g): 302,000 x g k-Factor: 69 Rotor Material: Titanium r min: 54.4 mm r av: 81.2 mm r max: 107.9 mm Nominal Rotor Capacity: 468 mL Number of Rotor Cavities x Nominal Largest Load Capacity: 12 x 39 mL Nominal Largest Container/Bucket/Carrier/Canister Dimensions: 25 x 89 mm Users Manual & Specs Specification: Manufacturer: Beckman Part Number: Type 50.2 Approximate Weight: 28 lbs Width: 9 Inches Height: 7 Inches Length: 9 Inches Returns: Accepted within 30 Days* / 365 Day Warranty** (*30 Day Money Back Guaranty, Less Shipping & Return Service if Buyer is Not Fully Satisfied as long as all of the items are returned in the same condition as received*) (**365 Day Warranty, I Will Guaranty All Items Included in this Listing to Work as intended by OEM Specifications for No Less Than 365 Days from the Date your shipment arrives When Installed by a Licensed Professional in Accordance to Manufacturer Directions. INK / PRINTHEADS / FUSERS / TONERS & OTHER CONSUMABLES ARE NOT COVERED UNDER WARRANTY**) *** We Will Not be responsible for labor, improper installations, consequential or incidental damages in nature whether direct or indirect at any time including but not limited to any of the above guaranties or otherwise; any liability shall not exceed a full refund of the auction price. *** Shipping / Handling Charges: Shipping: Free* (*All 50 States, Excludes Districts, via Economy Post) We always combine shipping whether you choose Free Shipping or Elect to Upgrade. Combined Shipping will be Calculated as Follows: Base Price Size/Weight of Largest Item, plus Weight of Additional Items. I cover the first $10 of each additional item when you choose to upgrade shipping, as shipping is estimated any overpayments from shipping are notified prior to shipping & refunded when your item is delivered. Handling: Free As Always