Beckman Optimax Table Top Ultra (130,000 Rpm) With Choice Of Rotor

US $2048

Selden, New York, United States
May 24th

Open on mobile:
QR code

BECKMAN COULTER Optima MAX Comes with a choice of a rotor listed below and a 30 days Parts warranty - MLA-80 s/n 00U484-- MLA-80 s/n 01U532 TLA 100.4 TLS-55 s/n 93U2770 TLS-55 s/n 01E2929 TLA 100.3 TLV-100 s/n 252 TLV-100 s/n 503 TLN-100 s/n 9U2139 TLA-100.2 s/n 615 TLA-100.1 s/n 535 The Beckman Optima MAX Ultracentrifuge Series is microprocessor-controlled tabletop systems that generate high centrifugal forces for a variety of high-speed applications. The Beckman ultracentrifuge design features a variable-frequency induction drive and rotor overspeed identifcation system. The Optima Max centrifuge also has a program memory that can contain up to ten ?ve-step programs, and offers a choice of acceleration and deceleration rates. Easy to operate, the high-speed MAX Series can be employed for a variety of applications, including pelleting membranes, proteins, viruses or DNA and also separation of DNA or proteins on density gradients. The Beckman Optima MAX Ultracentrifuge runs at 5,000 to 130,000 rpm in 1,000-rpm increments, Due to their direct drive induction motor with thermoelectronic air-cooling and moisture purging vacuum system, the Beckman Optima MAX and MAX-E centrifuges are considered to be low maintenance systems. When placing the rotor in the chamber, the Beckman systems are automatically secured to the drive hub through the self-locking rotor attachment, which is audible by a click sound. the Beckman Optima MAX centrifuge cuts down the centrifugation time of applications and allow quick access when placed on a laboratory bench. The structure of the system also helps avoid longer transportation time for the benefit of more sensitive samples. Call us today to learn more about the Beckman Optima MAX Series! Optima MAX Optima MAX Set Speed 5 000 to 130 000 rpm in 1000-rpm increments Speed Control Actual rotor speed, ?50 rpm of set speed Speed Display Actual rotor speed in 100-rpm increments above 5,000 rpm and 10-rpm increments at speeds below 5,000 rpm Time Set time to 99 hours 59 minutes Time Display Manual operation: indicates run time remaining Programmed operation: time remaining in step Temperature 0 to 40?C in 0.1? increments Temperature Control (after Equilibration) ?2?C of set temperature Temperature Display Actual rotor temperature in 0.1? increments Ambient Temperature Range 15 to 35?C Humidity Restrictions < 95% (oncondensing) Vacuum Below 10 microns (1.34 Pa) Acceleration 10 acceleration pro les 9 slow rates from 0 to 5 000 rpm followed by full acceleration to set speed; or maximum acceleration Deceleration 11 deceleration pro les 10 slow rates from 5 000 to 0 rpm, including coasting to a stop without brake; or full dynamic braking from set speed Dimensions (H x W x D) 58.4 cm x 73.7 cm x 58.4 cm (23 in. x 29 in. x 23 in.) Weight 99 kg (217 lb) Ventilation Clearances (Sides and Rear) 7.6 cm (3.0 in.) Control Panel Coated polycarbonate Top Surface Urethane paint Other Surfaces General purpose paint Electrical Requirements 90 110 VAC, 12 A, 50/60 Hz 100 130 VAC, 12 A, 50/60 Hz 198 254 VAC, 6 A, 50 Hz Maximum Heat Dissipation into Room under Steady-State Conditions 1750 Btu/hr (0.5 kW) Noise Level 0.91 m (3 ft) in Front of Centrifuge < 60 dBa Installation Category II Pollution Degree 2 Posted with Mobile Additional Details Country of Manufacture: United States