Bezzera Strega Lever Espresso Machine

US $2,287.91

  • Naples, Florida, United States
  • Jan 31st
Here comes the fun There are times when one wants the best espresso extraction without hesitating to what is involved to install a quality espresso machine and without hesitating to learn the skills needed to make it happen. Are you ready? Well, after setting up this machine, and by using the appropriate commercial grade grinder, it will take you approxamately around 77 extractions by playing with your differnt grind of espresso ground as well as your manual skills in regards the lever. By refining our skills, you may see every other espresso machine as inadequate! The reason is the flavor profiles offered by the Strega line are extraordinary! Workour for free, you don't pay for your pain -:) The only downside was the lever requires some muscle! The lever is pushed down against a spring until the lever locks into position. After locking and after the bottom rim of the demitasse cup is covered with espresso, the lever needs to be disengaged from the locked position, and the spring will push the lever up. If the grind is too coarse, the lever will come up too fast. If there is no coffee in the basket or the portafilter is missing, this lever will snap upwards. We warn you that the lever can cause personal injury to your face or eye socket. It is wise, to not placing your face directly in front of the lever. Features: Double water supply/Switchable: This machine can be operated with the reservoir only or it can be plumbed directly to the water line. Our suggestion on initial usage, to avoid heating element damage, is to first operate the unit as a tank model. Vibration pump: Activated to refill boiler or when lever is brought into down, locked position for pre-infusion. Pressurstat to monitor boiler's steam pressure The grouphead is heated by a separate heating element to keep the temperature more stable. There are weights placed in the lower rear of the machine's interior to keep it more stable while pulling it down on the lever. Hot water wand on right side uses joystick controls. Steam wand on left side is multi-directional and utilizes non-compression valve with a joystick control. Boiler pressure gauge indicates steam pressure in boiler. Pump activated for refilling the boiler as well as for pre-infusion of the coffee in the grouphead prior to full piston lever extraction.   Specifications: Measurements: 27.95" H x 12.99" W x 17.72" D (71 cm H x 33 cm W x 45 cm D). Weight: 63.93 pounds (29 kilograms). Shipping weight: 68.34 pounds (31 kilograms). Power: 1550 watts, 110 volts, 50/60 hertz. Boiler capacity: 0.53 gallons (2 liters). Water tank capacity: 1.06 gallons (4 liters). Portafilter size: 2.28" (58 mm). Nipple for water supply: G 3/8" (9.53 mm). Drain connector diameter: 0.39" (10 mm). Made in Milan, Italy. Accessories included: single spout portafilter with single cup basket, double spout portafilter with double cup basket, handle for lever in accessory box, stainless steel braided hose for water connection, drain hose for draining drip tray, grouphead cleaning brush, plastic tamper, and plastic measuring scoop.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
UPC 617629664669

Directions

Similar products from Espresso Machines & Spare Parts

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies