US $260
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Gar, Dormer, Xactform, YMW, KoolTwist |
Directions
Similar products from Solid Carbide Drill Bits
GI TOOL 138994 9/64 SOLID CARBIDE DRILL JOBBER LENGTH MADE IN USA NEW
GI TOOL 139456 LETTER S .348" SOLID CARBIDE DRILL JOBBER LENGTH MADE IN USA NEW
(Lot of 5) Letter Q Garr 89656 5xD TiALN 2 Flute Solid Carbide Drill (B 213)
13 MM METRIC SOLID CARBIDE DRILL COOLANT FED 6" OAL NEW USA MADE
New SGS Solid Carbide #25 x 2.625 3 Flute Drill Bit #53025
(QTY 10) 1/2" YG-1 Solid Carbide V7 INOX 4 Flute TIALN Coated
3/4" YG-1 Solid Carbide V7 INOX 4 Flute TIALN Coated End Mill QUAN 5
3/4" X 1-1/2" X 4" SOLID CARBIDE TIALN COATED END MILL 4 FLUTE
3/8" Diameter 2 Flute 60° Degree Point US22 Drill Mill Carbide ALTiN
Kimball Midwest Super Primalloy 5 piece Countersink Set 82-4070
ASSORTED LOT OF CARBIDE DRILLS, 17 NEW CARBIDE DRILLS
NO RESERVE 8 LONG CARBIDE DRILLS
LH 3/4" dia Solid Carbide Roughing End side mill 4" length 2" cut Left Hand
LH 3/8" d Solid Carbide Roughing End side mill 2.5" length 1-1/4" cut Left Hand
Precision Twist 17/64" (.2700) Solid Carbide TiN Coated Drill
29/64 GARR TOOL Carbide Coolant Drill 2FL
3/4 Niagara Carbide Endmill 5F SE ALTIN 1-5/8 X 4
7/16 MITSUBISHI Carbide Coolant Drill 2F MWS04375X8DB VP15TF
7.0MM SANDVIK Carbide Drill 2F R840-0700-70-A1A 1220
MITSUBISHI Solid carbide drills. 2 MZE0562MA 9/16" And 2 MZE06250MA 5/8"
People who viewed this item also vieved
Union 5/8" x # 2 Taper Shank Twist Drill Bit
Nachi 27/32" Stepped Shank Twist Drill Bit
ITW 51/64" x # 2 Taper Shank Twist Drill Bit
Carbide Head Countersink 3/8" X 82 Degree , 1/4" Shank
6-Flute Carbide Head Countersink 1/2" X 82 Degree , 1/4" Shank
Coolant Thru Carbide Drill 1/2", 1-1/2" FL, 4.5" OAL
NACHI 29/32" x 3/4" Reduced Shank Twist Drill Bit
Morse 1" x Approx .7" Reduced Shank Twist Drill Bit
Morse 1" x Approx 7/16" Reduced Shank Twist Drill Bit
Trico 30648 MD-1 Tri-Cool Cutting Oil
3.50" x 12.5" Spade Drill 2.50" Straight Shank
3.750" x 15.0" Spade Drill #5 Morse Taper Coolant Induced Shank
AVIATION EXCESSED DRILL BITS #16 cobalt
AVIATION EXCESSED DRILL BITS #27 cobalt
AVIATION EXCESSED DRILL BITS LETTER "D" COBALT
Lot of 2 Precision Twist 1/4" Parabolic Flute Stub Length Drills USA
LOT of 10 NEW #55 STRAIGHT SHANK DRILL BITS jobber cotter pin hss CLEVELAND USA
LOT of 10 NEW #49 STRAIGHT SHANK DRILL BITS jobber cotter pin hss CLEVELAND USA
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies