BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 0

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 1

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 2

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 3

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 4

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 5

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 6

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 7

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 8

BINKS 40-3500/ VERID MODEL XPS750 SOLVENT STILL RECYCLER, US $1,650.00 – Picture 9

Binks 40-3500/ Verid Model Xps750 Solvent Still Recycler

US $1,650.00

Wadsworth, Ohio, United States
Mar 7th

Open on mobile:
QR code

Binks/Verid Model # 40-3500, 7.5 gallon solvent paint still, distill. This is the equipment that is used to reclaim solvents out of paints and other volatile solutions to comply with EPA regulations in containment areas. You can then reuse the distilled solvents for cleaning or flushing equipment. The still has been sitting in our warehouse un-used. The still needs a good cleaning but mechanically, it is in great shape. These were about $3~$4,000 new. Selling for $1650. Below I added some infomation form the manufacturer BINKS 40-3500 Solvent Recovery System About Solvents Solvents are classified as hazardous materials under federal and state laws; used solvents are hazardous waste. Handling, storing, transportation and disposing of hazardous waste solvents is highly regulated and a costly operation. Recycling waste solvents in-house will save on disposing cost and new purchases of new solvents. You can save up to 90% of these costs with the BINKS Solvent Recovery System. Features: Stainless steel solvent drum, Explosion proof fan motor, Can be optimized for solvents Air cooled condenser, Remote control panel, Distills chlorinated solvents Specifications: Still Capacity:7.5 gal batch Dimensions:20"W x 43"L x 47"H Control Panel:12"W x 16"H x 8.5"D Electrical:208/240V Single Phase, 15A Weight:195 lbs. Shipping Weight:300 lbs. Average Distillation Time: Aetone:4.0 hrs. Lacquer Thinner: 5.0 hrs. MEK: 4.0 hrs. IPA (alcohol): 4.0 hrs. 1, 1, 1, Trichlorethane: 4.0 hrs. VM & P Naptha: 4.5 hrs. Automatic Controls The BINKS 40-3500 reclaimer controls the distillation of a wide range of waste solvents automatically. Controls for the heater temperature, distillation temperature, and rate of recovery are set up at installation. These controls allow the reclaimer to distill a wide range of solvents. After installation, the operator only uses the on/off switch. Air Cooled, Oil Free Installation of the KT750ss requires only connecting the electrical power. And,maintenance after installation is even easier with no water or oil baths tomaintain.The explosion proof fan motor, the high efficiency air cooled condenser, and the heavy stainless steel solvent drum were chosen for durability. Built for the Operator Easy to load. Easy to run. Easy to clean. The reclaimer's insulated cover comes off completly for easy loading and cleaning. With the option of plastic liners or just loading the waste solvent into the cleanable stainless steel tank, it takes only minutes of operator time per batch. The built-in stainless steel sink prevents spills when loading.