+ Post new Ad
BISON Super Precision Live Center Point Length : Overall Length : 4.07", US $125.59 – Picture 0
BISON Super Precision Live Center Point Length : Overall Length : 4.07", US $125.59 – Picture 0

Bison Super Precision Live Center Point Length : Overall Length : 4.07"

US $125.59

  • Flushing, New York, United States
  • Jan 30th
Open on mobile:
QR code
BISON Super Precision Live Center - TAPER: 1 MT Point Length : Overall Length : 4.07" 1MT SUPER PRECISION LIVE CENTER - BISON Features Machined from one piece of forging, hardened and precision ground. Three precision, high quality bearings are protected by steel shield and neoprene seal. Does not require any lubrication. PRODUCT SPECIFICATIONS Unit of Measure each Must Buy 1 Country of Origin POLAND Shipping Restrictions None Brand BISON Description BISON Super Precision Live Center - TAPER: 1 MT Point Length : Overall Length : 4.07" Model # 7-565-101 Taper 1 MT Weight Of Workpiece 220 lbs. Maximum Rotational Speed 5,000 RPM Largest Head Diameter 1.5" Length From Gage Line To Tip 1.97" Length From Head To Tip of Point 0.7" Morse Taper 1 Overall Length 4.07" Point Angle 60° Point Diameter 0.59" Runout 0.0002" Weight 0.64 lbs. eBay Inventory Software and eBay Automated Listing Powered By:
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Part Number 7-565-101
Part Brand BISON

Directions

Similar products from Live Centers

Toolmex Carbide Lathe Center

Toolmex Carbide Lathe Center

  • Grand Rapids, Michigan, United States
  • Jan 30th
HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (POINT DIAMETER 1.242")

HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (POINT DIAMETER 1.242")

  • Fairfield, Iowa, United States
  • Jan 30th
Motor Tool Detroit #4 Morse Taper Live Center

Motor Tool Detroit #4 Morse Taper Live Center

  • Johnson City, New York, United States
  • Jan 30th
Ready Tool #4 Morse Taper Live Center

Ready Tool #4 Morse Taper Live Center

  • Johnson City, New York, United States
  • Jan 30th
Bruckner #5 Morse Taper Live Center

Bruckner #5 Morse Taper Live Center

  • Johnson City, New York, United States
  • Jan 30th
Jarno #14 Taper Carbide Tipped Dead Center

Jarno #14 Taper Carbide Tipped Dead Center

  • Johnson City, New York, United States
  • Jan 30th
RITEN 68605 5MT 1-3/4" Point Hardened Steel Full Dead Center Made in USA 1L

RITEN 68605 5MT 1-3/4" Point Hardened Steel Full Dead Center Made in USA 1L

  • Saint Louis, Missouri, United States
  • Jan 30th
SHARS 40 NMTB Shank 5/8-11 Draw Bar for Boring Heads 1-1/2"-18 NEW

SHARS 40 NMTB Shank 5/8-11 Draw Bar for Boring Heads 1-1/2"-18 NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
Interchangable Point Live Center Kit

Interchangable Point Live Center Kit

  • Fresno, California, United States
  • Jan 30th
USED RITEN USA THREADED END #14 JARNO LATHE DEAD CENTER (1.150"-Point Diameter)

USED RITEN USA THREADED END #14 JARNO LATHE DEAD CENTER (1.150"-Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
ROTORI Live Center Taper Shank Size 5MT 4629.71 lbs 40mm Standard |KR2|

ROTORI Live Center Taper Shank Size 5MT 4629.71 lbs 40mm Standard |KR2|

  • Saint Louis, Missouri, United States
  • Jan 30th
RITEN LIVE CENTER A0912 *NEW IN BOX*

RITEN LIVE CENTER A0912 *NEW IN BOX*

  • Sterling Heights, Michigan, United States
  • Jan 30th
NEW Z LIVE CENTER 5MT CNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER #5

NEW Z LIVE CENTER 5MT CNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER #5

  • Diamond Bar, California, United States
  • Jan 30th
WELL USED DAMAGED #2MT MORSE TAPER DEAD CENTER (.728"-Point Diameter)

WELL USED DAMAGED #2MT MORSE TAPER DEAD CENTER (.728"-Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
INTERSTATE 8 Point 4MT Shank Heavy Duty Interchangeable Point Live Center Set 1Y

INTERSTATE 8 Point 4MT Shank Heavy Duty Interchangeable Point Live Center Set 1Y

  • Saint Louis, Missouri, United States
  • Jan 30th
MILL, LATHE, MILLING MACHINE MEDIUM LIVE CENTER WITH MT2 SHANK M2023402 NEW!

MILL, LATHE, MILLING MACHINE MEDIUM LIVE CENTER WITH MT2 SHANK M2023402 NEW!

  • Broadview Heights, Ohio, United States
  • Jan 30th
Royal No. 3 Morse Taper Live Center (Inv.29566)

Royal No. 3 Morse Taper Live Center (Inv.29566)

  • Portland, Connecticut, United States
  • Jan 30th
BRAND NEW ENCO 251-3044 DEAD CENTER WITH 4MT SHANK - #4 MORSE TAPER

BRAND NEW ENCO 251-3044 DEAD CENTER WITH 4MT SHANK - #4 MORSE TAPER

  • United States
  • Jan 30th
Bench Centers 8 x 24 in. (Inv.17261)

Bench Centers 8 x 24 in. (Inv.17261)

  • Portland, Connecticut, United States
  • Jan 30th
RITEN 71013 1MT MT1 Morse Taper Solid Center Standard Point Dead Center A12

RITEN 71013 1MT MT1 Morse Taper Solid Center Standard Point Dead Center A12

  • Saint Louis, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

LAST ONE! USED 1-7/8" TG200 SINGLE ANGLE TG-200 COLLET 1.875"

LAST ONE! USED 1-7/8" TG200 SINGLE ANGLE TG-200 COLLET 1.875"

  • Fairfield, Iowa, United States
  • Mar 11th
11 PIECE R8 COLLET SET (1/8-3/4 INCH BY 16THS) (3900-0007)

11 PIECE R8 COLLET SET (1/8-3/4 INCH BY 16THS) (3900-0007)

  • Kyle, Texas, United States
  • Mar 11th
6 HARDINGE ASSORTED 5C COLLETS - 7/64", 3/8", 7/16", 19/32", 45/64", 1"

6 HARDINGE ASSORTED 5C COLLETS - 7/64", 3/8", 7/16", 19/32", 45/64", 1"

  • Covina, California, United States
  • Mar 11th
Yuasa 5C Collet Index 550-004

Yuasa 5C Collet Index 550-004

  • Ventura, California, United States
  • Apr 24th
STARRETT NO. 278 Toolmakers V-BLOCKS WITH CLAMP

STARRETT NO. 278 Toolmakers V-BLOCKS WITH CLAMP

  • East Hanover, New Jersey, United States
  • Apr 24th
12 x 18 x 8 open end Slotted Angle Block x 1" Thick

12 x 18 x 8 open end Slotted Angle Block x 1" Thick

  • Coventry, Rhode Island, United States
  • Apr 25th
two(2) - Vintage Armstrong #403 C-Clamps- 3" capacity

two(2) - Vintage Armstrong #403 C-Clamps- 3" capacity

  • Cavendish, Vermont, United States
  • May 1st
two(2) - Vintage C-Clamps- 2" capacity Armstrong #202, 1 3/4" Williams #202

two(2) - Vintage C-Clamps- 2" capacity Armstrong #202, 1 3/4" Williams #202

  • Cavendish, Vermont, United States
  • May 1st
ADJUSTABEL BASE HOLD DOWN BRIDGEPORT CLAMP 1-1/4" X 1" X 4"

ADJUSTABEL BASE HOLD DOWN BRIDGEPORT CLAMP 1-1/4" X 1" X 4"

  • New Bedford, Massachusetts, United States
  • May 2nd
RIDGID 46500 Center Jaw Set E-631 NEW, NEVER USED!

RIDGID 46500 Center Jaw Set E-631 NEW, NEVER USED!

  • Fraser, Michigan, United States
  • May 13th
RIDGID 43900 Jaw Chuck w/Teeth Inserts D-475-2X NEW, NEVER USED!

RIDGID 43900 Jaw Chuck w/Teeth Inserts D-475-2X NEW, NEVER USED!

  • Fraser, Michigan, United States
  • May 13th
10" Oversized (Extension) Steel Jaws 1.5mm x 60° Serrated for B-210 Chucks *USA*

10" Oversized (Extension) Steel Jaws 1.5mm x 60° Serrated for B-210 Chucks *USA*

  • Placentia, California, United States
  • May 14th
SPI 77-427-3 Precision Sine Vise 5"

SPI 77-427-3 Precision Sine Vise 5"

  • Columbus, Indiana, United States
  • May 14th
3SV Grip-Master Drill Press Vise 3" Opening 1-1/4" Depth 3" Wide

3SV Grip-Master Drill Press Vise 3" Opening 1-1/4" Depth 3" Wide

  • Wilmington, Ohio, United States
  • May 15th
3SV Grip-Master Drill Press Vise 3" Opening 1-1/4" Depth 3" Wide Used

3SV Grip-Master Drill Press Vise 3" Opening 1-1/4" Depth 3" Wide Used

  • Wilmington, Ohio, United States
  • May 15th
Jergens 47132 Taper Nose Strap 25/32" ID x 8" Long

Jergens 47132 Taper Nose Strap 25/32" ID x 8" Long

  • Kansas City, Missouri, United States
  • May 30th
Manual Collet Closer Actuator from Sheffield Grinder Cylindrical Grinder

Manual Collet Closer Actuator from Sheffield Grinder Cylindrical Grinder

  • Buffalo, New York, United States
  • May 30th
NEW COFFING ECVT-2008-3 ELECTRIC CHAIN HOIST, 2000 LB. W/TROLLEY ENRANGE REMOTE

NEW COFFING ECVT-2008-3 ELECTRIC CHAIN HOIST, 2000 LB. W/TROLLEY ENRANGE REMOTE

  • Fountain Valley, California, United States
  • May 30th
8" precision tilting rotary table

8" precision tilting rotary table

  • Norcross, Georgia, United States
  • Jun 3rd
6" prcision tilting rotary table

6" prcision tilting rotary table

  • Norcross, Georgia, United States
  • Jun 3rd
10" precision tilting rotary table

10" precision tilting rotary table

  • Norcross, Georgia, United States
  • Jun 3rd
Pair Of Starrett No. 54 Hold Down 6" Hardened

Pair Of Starrett No. 54 Hold Down 6" Hardened

  • Yorktown, Indiana, United States
  • Jun 4th
Starrett Parallels S384-3Z in Box. Made in USA.

Starrett Parallels S384-3Z in Box. Made in USA.

  • Oak Ridge, Tennessee, United States
  • Jun 4th
Starrett #568 V-Block

Starrett #568 V-Block

  • Wheatland, Pennsylvania, United States
  • Jun 4th
"Penny Black Cling Stamp 5""X7""-La Fleur Rouge"

"Penny Black Cling Stamp 5""X7""-La Fleur Rouge"

  • Hickory Hills, Illinois, United States
  • Jun 9th
Creativity Essentials A5 Clear Stamp Set 128/Pkg-Alphas Folk

Creativity Essentials A5 Clear Stamp Set 128/Pkg-Alphas Folk

  • Hickory Hills, Illinois, United States
  • Jun 9th
"La-La Land Die-Diamond Wire, 3.5""X1.75"""

"La-La Land Die-Diamond Wire, 3.5""X1.75"""

  • Hickory Hills, Illinois, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies