Blanket Bars For Ryobi 3302 - Itek 3985 - Ab Dick 9985

US $139.00

  • East Grand Forks, Minnesota, United States
  • Jan 30th
Quick Change Blanket Bars Ryobi 3302 – Itek 3985 – AB Dick 9985 A real time saver! Our Quick Change Blanket Bars turns a job that can take the better part of an hour, to changing the blankets in just a few in minutes. The photos show how to remove the existing bars and replace the Quick Change Blanket Bars. Remove the existing bars from the blanket cylinder. Remove the blanket tension assembly. There are two 5mm allen head screws on each side of the assembly. These screws are quite tight, so use a T-handle allen rench to remove them. Also notice the masking tape applied to the allen wrench and screw. This is a good idea so the screw doesn’t fall into the press and get lost. The blanket tension assembly with the long bolts removed. The photo shows a Quick Change Blanket Bar attached and the other ready to be attached. There are two things to consider when replacing the tension assembly back on the press. First, use the center tension wheel to move the bars closer together so you can see the screw holes and make it easier to attach. Second, use masking tape to hold the screw to the allen wrench so the screw doesn’t get away from you. Simply hook the holes on the blanket over the pins on the Quick Change Blanket Bars and ONLY FINGER TIGHTEN the blanket. Next run one or two sheets to take the slack out of the blanket and retighten with your fingers. EASY! This set consists of 4 bars for both blanket cylinders, 8 bolts and installation instructions. We ship in a Flat Rate Priority Mail box to save you money on shipping. Please visit our eBay store for more blanket bars for other press models.

Directions

Similar products from Spare Parts & Accessories

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies