Blaze300: 300,000 Btu Indirect Heater - Approved For Construction

US $3200

Eden Prairie, Minnesota, United States
May 25th

Open on mobile:
QR code

BLAZE300: 300,000 BTU INDIRECT HEATER This indirect-fired portable heater features a heat exchanger that contains the flame, while the fumes are ventilated out through a chimney. Due to being indirect-fired, it can be operated indoors and ducted, but has about a 90% efficiency rate due to heat lost through the chimney. Can be controlled with a thermostat, humistat, or timer, and requires no supervision. Four Pass Heat Exchanger Technology The combustion chamber in this unit is manufactured using AISI 430 stainless steel along with an aluminized steel heat exchanger to increase performance. This allows the exhaust gas to increase heat exchange with the cooling air and obtain maximum thermal efficiency. Fuel One really nice thing about this unit is that it can be used with four different fuel types - Jet Fuel, Kerosene, Diesel #1, and Diesel #2. The Fuel lines are coated in hydrocarbon-resistant rubber, and are wire mesh protected. There is a screw on fuel cap, along with a fuel tank drain plug in case you need to remove your fuel for transportation. FEATURESApproved for construction No supervision required Can be controlled by thermostat, humidstat, or timer 1ft power cord Automatic post ventilation cycle to cool down the combustion chamber Electronic flame control unit Overheating thermostat (safety device turns off unit and requires a manual reset) Fuel lines in hydrocarbon-resistant rubber, wire-mesh protected Screw on fuel cap Fuel tank drain plug Electric control panel Combustion air pressure switch (safety device turns off unit and requires a manual reset) 10" pneumatic wheels Compatible with the Single Fuel Line Kit (not included) AISI 430 stainless steel combustion chamber with four-pass heat exchanger technology Oil filter; pre-heated oil filter SPECS MANUFACTURER WARRANTY (1) Year Limited Warranty INCLUDES (1) Blaze300: 300,000 BTU Indirect Heater MODEL NUMBER 48.7004 BRAND Veloci Performance Products HEAT INPUT 293,982 BTU/H HEAT OUTPUT 258,704 BTU/H FUEL TYPE Diesel #1, Diesel #2, Jet Fuel, Kerosene FUEL CONSUMPTION 2.17 Gallons per hour FUEL CAPACITY (GAL.) 27.7 RUN TIME 13 hours BTU OUTPUT 300,000 BTU HEATED AIRFLOW 2,530 TEMPERATURE RISE 126°F at 64°F POWER SUPPLY 120V, 1PH, 60HZ FAN MOTOR POWER 1 HP (1,700 RPM) CURRENT RATING 11.80 AMPS FLUE SIZE 6" START TYPE Electric THERMOSTAT INCLUDED No WEIGHT (LBS.) 310 Call (800) 920-7450 with any questions or for a shipping quote.