Bms Protection Board 100a Accessories Replacement W/balance Li-ion Lithium

US $12.44

  • suzhou, China
  • Jul 11th
Product Description BMS Protection Board 100A Accessories Replacement W/Balance Li-ion Lithium Features: 100% brand new and high quality Made of high-quality materials, durable 4 series of 16.8V lithium-ion lithium battery protection board. And balance The protection board has overcharge protection, overdischarge protection, overcurrent protection, short circuit protection, and temperature protection With 10 MOS tubes, strong heat dissipation aluminum, continuous current limit 100A Suitable for 4S battery packs such as inverters, xenon lamps, solar street lamps, etc. T point description: adding a normally closed temperature sensor switch can expand the function of temperature protection, and the solder joints next to the 0R resistor need to be removed Fine workmanship, good performance Easy to use Product parameters: Panel color: green/blue (random) Size: about 70*60*8.5mm Discharge: Continuous discharge current: 100A Instantaneous discharge current: 120A toll: Charging voltage: 16.8V Charging current: 10 (maximum) A Switching power supply 17-18V Overcharge protection: Overcharge detection: 4.28±0.05V Protection delay: 0.5S Overcharge release: 4.08±0.05V balance: Detection voltage: 4.2±0.05V Release voltage: 4.2±0.05V Balance current: 65mA Over discharge protection: Over discharge detection: 2.5±0.08V Over-discharge detection delay: 0.1S Release voltage: 2.9±0.1V Overcurrent protection: Detection voltage: 150mV Detection delay: 40mS Current detection: 120±10A Release condition: cut off the load Short circuit protection: Protection conditions: cut off the load (non-short circuit) Detection delay: 250uS Release condition: cut off the load Resistance: Internal: 20m Self-consumption: Working current: 30uA Sleep current (when over-discharged): 20uA Operating temperature: Range: -20/ +80 Package list: 1 *BMS protection board Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data. Payment We accept payment via Paypal only. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. Delivery details   We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.   Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.    It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.   Contact us   We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded
Size about 70*60*8.5mm
MPN Does Not Apply
Operating temperature Range -20/ +80
Panel color green/blue (random)
Package list 1 *BMS protection board
UPC Does not apply

Directions

Similar products from Voltage Converters & Meters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies