+ Post new Ad
Bolton JTA3 - 1.77 Mill Arbor Jacobs BT-50 Taper Adapter Tool Drill Chuck Holder, US $63.30 – Picture 0
Bolton JTA3 - 1.77 Mill Arbor Jacobs BT-50 Taper Adapter Tool Drill Chuck Holder, US $63.30 – Picture 1
Bolton JTA3 - 1.77 Mill Arbor Jacobs BT-50 Taper Adapter Tool Drill Chuck Holder, US $63.30 – Picture 0
Bolton JTA3 - 1.77 Mill Arbor Jacobs BT-50 Taper Adapter Tool Drill Chuck Holder, US $63.30 – Picture 1

Bolton Jta3 - 1.77 Mill Arbor Jacobs Bt-50 Taper Adapter Tool Drill Chuck Holder

US $63.30

  • Pomona, California, United States
  • Jan 30th
Open on mobile:
QR code
Bolton BT50-JTA3-1.77 Mill Arbor Jacobs Taper Adapter Tool Drill Chuck Holder BOLTON TOOLS   BT50-JTA2-1.77 Mill Arbor Jacobs Taper Adapter Tool Drill Chuck Holder FREE SHIPPING!!! Call us if you have any questions! 909-594-1683 BT50-JTA3  Specification: Finish: Black Oxide Runout: .005mm/.0002in TIR Works on all BT50 machines All critical tool holder surfaces precision ground Made from alloy  structural steel hardened to 48 - 52rc 8000 rpms Collet nut is included Coolant through capability Rear thread for pull stud is  M24 Order No. TYPE L L1 D L2 Note A0401009 BT50-JTA3-1.77    7    1.77    0.81    1.22  $63.30 Bolton Tools have been on the market for over 4 years.  The customer response has been tremendous! People are very happy with our machine quality and price point.  We offer some of the best prices in the country, we guarantee it!  We are committed to our products and our customers.  We would love for you to give us a call to discuss any of your machining needs. (909)594-1683 BOLTON TOOLS IS LOCATED IN CITY OF INDUSTRY, CA.  SHOW ROOM IS AVAILABLE! Shipping is FREE in the lower 48 states.   All products ship from CITY OF INDUSTRY, CA within 1 business day.   We have a 30 day return policy but the buyer must pay all shipping cost including the cost to get the machine to the buyer.  There will be no additional fees if the machine arrived to us the way it was sent out, otherwise we may subtract some of the refund amount. Call us if you have any questions! 909-594-1683 customerservice@boltonhardware BOLTON TOOLS SHOWROOMS: City of Industry, CA: 909-594-1683 or toll free 800-471-4070 Houston, TX: 713-561-5880 or toll free 888-398-5848
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Bolton Tools
Model BT50-JTA3-1.77
Brand Bolton Tools
MPN A0401009

Directions

Similar products from BT Tool Holders

Kennametal CAT30 QC30EM062175 end mill adapter

Kennametal CAT30 QC30EM062175 end mill adapter

  • Lisle, Illinois, United States
  • Jan 30th
Kennametal CAT30 QC30EM075213 end mill adapter

Kennametal CAT30 QC30EM075213 end mill adapter

  • Lisle, Illinois, United States
  • Jan 30th
Kennametal BT30 3/4in end mill holder 0.75"

Kennametal BT30 3/4in end mill holder 0.75"

  • St Davids, Ontario, Canada
  • Jan 30th
Bolton BT40-JTA6 Milling Machine Arbor Jacobs Taper Adapter Tool Chuck Holder

Bolton BT40-JTA6 Milling Machine Arbor Jacobs Taper Adapter Tool Chuck Holder

  • Pomona, California, United States
  • Jan 30th
NEW Bolton Tools BT30-ER16-2.36 Milling Collet Chuck Mill Taper Adapter Holder

NEW Bolton Tools BT30-ER16-2.36 Milling Collet Chuck Mill Taper Adapter Holder

  • Pomona, California, United States
  • Jan 30th
USED TECHNARA BT-50 MST DETA-1 COLLET CHUCK HOLDER with COLLET BT50-DTA12-195

USED TECHNARA BT-50 MST DETA-1 COLLET CHUCK HOLDER with COLLET BT50-DTA12-195

  • Fairfield, Iowa, United States
  • Jan 30th
LYNDEX 3/4" CAT 40 Shell Mill TOOL HOLDER

LYNDEX 3/4" CAT 40 Shell Mill TOOL HOLDER

  • Portland, Oregon, United States
  • Jan 30th
NEW PARLEC C40-40ER412 COLLET CHUCK NEW IN BOX

NEW PARLEC C40-40ER412 COLLET CHUCK NEW IN BOX

  • Concord, New Hampshire, United States
  • Jan 30th
Bolton Tools BT40-MTA3 Milling Collet Chuck Morse Taper Adapter Mill Holder

Bolton Tools BT40-MTA3 Milling Collet Chuck Morse Taper Adapter Mill Holder

  • United States
  • Jan 30th
BIG BBT50-MEGA16D-105 MEGA DOUBLE POWER CHUCK, BT-50 SHANK

BIG BBT50-MEGA16D-105 MEGA DOUBLE POWER CHUCK, BT-50 SHANK

  • Converse, Indiana, United States
  • Jan 30th
LOT QTY 22 BT 40 HOLDERS AND COLLET CHUCKS (LOC1175)

LOT QTY 22 BT 40 HOLDERS AND COLLET CHUCKS (LOC1175)

  • Laingsburg, Michigan, United States
  • Jan 30th
USED COLLIS USA BT50 BILZ #1 TENSION & COMPRESSION TAP DRIVER BT-50

USED COLLIS USA BT50 BILZ #1 TENSION & COMPRESSION TAP DRIVER BT-50

  • Fairfield, Iowa, United States
  • Jan 30th
USED COMMAND URMA B4U4-0002 VERSAMAX MASS SYMMETRY BALANCED BT40 TOOL HOLDER

USED COMMAND URMA B4U4-0002 VERSAMAX MASS SYMMETRY BALANCED BT40 TOOL HOLDER

  • Fairfield, Iowa, United States
  • Jan 30th
BT Flange End Mill Holder BT40 x 5/16 x 2-1/2in Balanced 15000RPM G6.3.

BT Flange End Mill Holder BT40 x 5/16 x 2-1/2in Balanced 15000RPM G6.3.

  • Natick, Massachusetts, United States
  • Jan 30th
BT30 HORIZONTAL/VERTICAL TOOL SETTING STAND (3900-4080) - MADE IN TAIWAN

BT30 HORIZONTAL/VERTICAL TOOL SETTING STAND (3900-4080) - MADE IN TAIWAN

  • Chino, California, United States
  • Jan 30th
9/16" BROWN & SHARPE NO.21 SPRING COLLET B&S

9/16" BROWN & SHARPE NO.21 SPRING COLLET B&S

  • Zeeland, Michigan, United States
  • Jan 30th
BT40 HPI TG100 COLLET HOLDER A784

BT40 HPI TG100 COLLET HOLDER A784

  • Montville, Ohio, United States
  • Jan 30th
Nikken BT40 25mm End Mill Adapter 110mm Long, DIN-B Flange Coolant, 2 Screw

Nikken BT40 25mm End Mill Adapter 110mm Long, DIN-B Flange Coolant, 2 Screw

  • Elk Grove Village, Illinois, United States
  • Jan 30th
COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6425

COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6425

  • Dayton, Ohio, United States
  • Jan 30th
COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6401

COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6401

  • Dayton, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

CAT 50 Tool Holder “Extractor” Wrench - "Tool Holder Extractor Wrench for CNC"

CAT 50 Tool Holder “Extractor” Wrench - "Tool Holder Extractor Wrench for CNC"

  • Middletown, Ohio, United States
  • May 24th
TECNARA CAT 50 FACE MILL ADAPTER 1-1/2" ARBOR #150-2122 STK 6221

TECNARA CAT 50 FACE MILL ADAPTER 1-1/2" ARBOR #150-2122 STK 6221

  • Wadley, Alabama, United States
  • May 24th
Van Norman 944S Boring Bar OEM Cats Paws Size D / 4 , with OEM Screws, 777, 944

Van Norman 944S Boring Bar OEM Cats Paws Size D / 4 , with OEM Screws, 777, 944

  • Scottsdale, Arizona, United States
  • May 25th
Van Norman 944S Boring Bar OEM Cats Paws Size C / 3 , with OEM Screws

Van Norman 944S Boring Bar OEM Cats Paws Size C / 3 , with OEM Screws

  • Scottsdale, Arizona, United States
  • May 25th
indexable chamfer mill

indexable chamfer mill

  • Thaxton, Virginia, United States
  • May 27th
3.0" Insert Face Mill 1.0" Arbor Hole

3.0" Insert Face Mill 1.0" Arbor Hole

  • Johnson City, New York, United States
  • May 27th
Morse taper extention MT3 SHANK to MT2 hole

Morse taper extention MT3 SHANK to MT2 hole

  • Clarkston, Michigan, United States
  • May 27th
NMTB-40 1" X 8-1/2" MILLING ARBOR HORIZONTAL MILL

NMTB-40 1" X 8-1/2" MILLING ARBOR HORIZONTAL MILL

  • Highland, New York, United States
  • May 27th
Browning H 1 3/8 5/16 Bushing fixed 1-3/8 Bore"

Browning H 1 3/8 5/16 Bushing fixed 1-3/8 Bore"

  • San Ysidro, California, United States
  • May 29th
9-Bost Bronze Bushing B-911-12 Length 1-1/2"

9-Bost Bronze Bushing B-911-12 Length 1-1/2"

  • Mount Prospect, Illinois, United States
  • May 29th
NMTB-40 Tool Holder Draw Bar 2-1/8" Long Threads 9" OAL

NMTB-40 Tool Holder Draw Bar 2-1/8" Long Threads 9" OAL

  • Lorain, Ohio, United States
  • Jun 5th
Valenite 2" End Mill Holder w/ 2-1/4 Boring Bar for 1/2" & 3/4" Tools NMTB-50

Valenite 2" End Mill Holder w/ 2-1/4 Boring Bar for 1/2" & 3/4" Tools NMTB-50

  • Lorain, Ohio, United States
  • Jun 5th
Sandvik Coromant Hydro-grip C6-391.CGB-20 232A CNC

Sandvik Coromant Hydro-grip C6-391.CGB-20 232A CNC

  • Tremont, Illinois, United States
  • Jun 9th
KIRKELIE JUDGE STYLE 4-D-M QUICK CHANGE TOOLPOST MODEL 200 W/ MALE 201

KIRKELIE JUDGE STYLE 4-D-M QUICK CHANGE TOOLPOST MODEL 200 W/ MALE 201

  • Oxnard, California, United States
  • Jun 9th
2 Pcs 5/8" Gear Dia 11 Teeth T Shaped Grip Metal Drill Chuck Key

2 Pcs 5/8" Gear Dia 11 Teeth T Shaped Grip Metal Drill Chuck Key

  • USA, United States
  • Jun 9th
Pro-Series by HHIP 1/32-5/8 INCH JT3 PRO QUALITY DRILL CHUCK WITH KEY

Pro-Series by HHIP 1/32-5/8 INCH JT3 PRO QUALITY DRILL CHUCK WITH KEY

  • USA, United States
  • Jun 9th
Sunnen Complete Mandrel K20-713 : S713 Sleeve, AK20-A Adapter, Stone

Sunnen Complete Mandrel K20-713 : S713 Sleeve, AK20-A Adapter, Stone

  • Scottsdale, Arizona, United States
  • Jun 20th
Sunnen Set of 14 AK-20 Mandrels with Sleeves, Stones, Shoes, Adapters and Rack

Sunnen Set of 14 AK-20 Mandrels with Sleeves, Stones, Shoes, Adapters and Rack

  • Scottsdale, Arizona, United States
  • Jun 20th
5HP 4KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 18A

5HP 4KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 18A

  • DongGuan, China
  • Oct 30th
4HP 3KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 13A

4HP 3KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 13A

  • DongGuan, China
  • Oct 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies