+ Post new Ad
Bolton Tools R8-ER40 Milling Lathe Machine Precision R8 Collet Chuck, US $42.20 – Picture 0
Bolton Tools R8-ER40 Milling Lathe Machine Precision R8 Collet Chuck, US $42.20 – Picture 0

Bolton Tools R8-er40 Milling Lathe Machine Precision R8 Collet Chuck

US $42.20

  • Pomona, California, United States
  • Jan 30th
Open on mobile:
QR code
Order the R8-ER40 collet chuck today and experience the precision and durability of Bolton Tools' products. Bolton Tools presents the R8-ER40 milling lathe machine precision R8 collet chuck. This collet chuck is made from alloy structural steel that is hardened to 48 - 52rc and features critical tool holder surfaces that are precision ground. It works on all R8 machines and has a finish of black oxide with a runout of .01mm/.0004in TIR. The collet nut is included, and the rear thread for the pull stud is 7/16"-20. Bolton Tools, located in City of Industry, CA, has been on the market for over 4 years and has received tremendous customer response due to their quality machines and competitive prices. They offer free shipping in the lower 48 states and a 30-day return policy, with the buyer responsible for all shipping costs. There are no additional fees if the machine is returned in the same condition it was shipped out in.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model A0105008
Manufacturer Bolton Tools

Directions

Similar products from Collet Chucks & Sets

MT3 ER32 Chuck+18 PCs ER32 Collets+Spanner - new

MT3 ER32 Chuck+18 PCs ER32 Collets+Spanner - new

  • Vancouver, Washington, United States
  • Jan 30th
New ER20 MT2 M10 Drawbar CNC Milling Steel Material Collet Chuck Holder

New ER20 MT2 M10 Drawbar CNC Milling Steel Material Collet Chuck Holder

  • shenzhen, China
  • Jan 30th
C8 ER11A 100L Straight Shank Chuck Deep Processing for CNC Mill White Pack Bag

C8 ER11A 100L Straight Shank Chuck Deep Processing for CNC Mill White Pack Bag

  • shenzhen, China
  • Jan 30th
Young Bros Stamp Works 1/2 inch Steel Set 9 Figure Number Character MADE IN USA

Young Bros Stamp Works 1/2 inch Steel Set 9 Figure Number Character MADE IN USA

  • Columbus, Ohio, United States
  • Jan 30th
UM-TYPE ER16 COLLET CHUCK NUT(18000RPM) (3900-0688)

UM-TYPE ER16 COLLET CHUCK NUT(18000RPM) (3900-0688)

  • Chino, California, United States
  • Jan 30th
KENNAMETAL KEARNEY & TRECKER TG 100 COLLET CHUCK 8" OAL BM1C79899 (LOC1170B)

KENNAMETAL KEARNEY & TRECKER TG 100 COLLET CHUCK 8" OAL BM1C79899 (LOC1170B)

  • Laingsburg, Michigan, United States
  • Jan 30th
Young Bros. Stamp Works 3/16 inch Steel Set 27 Letter Characters MADE IN USA

Young Bros. Stamp Works 3/16 inch Steel Set 27 Letter Characters MADE IN USA

  • Columbus, Ohio, United States
  • Jan 30th
CNC Milling Straight Shank Collet Chuck C8-ER8A-100L

CNC Milling Straight Shank Collet Chuck C8-ER8A-100L

  • shenzhen, China
  • Jan 30th
Straight Shank Extended Chuck C16-ER20A-100L for CNC Milling Lathe

Straight Shank Extended Chuck C16-ER20A-100L for CNC Milling Lathe

  • shenzhen, China
  • Jan 30th
3/4 X 4 INCH ER-25 STRAIGHT SHANK COLLET CHUCK-PRO (3900-2092)

3/4 X 4 INCH ER-25 STRAIGHT SHANK COLLET CHUCK-PRO (3900-2092)

  • Chino, California, United States
  • Jan 30th
DELTRONIC PINS .0488 to .0512

DELTRONIC PINS .0488 to .0512

  • West Point, Pennsylvania, United States
  • Jan 30th
Hardinge Brothers 2J speed collet chuck #2A-D3" , SJOGREN

Hardinge Brothers 2J speed collet chuck #2A-D3" , SJOGREN

  • Elwood, Indiana, United States
  • Jan 30th
CAT40 Collet Chucks DA 180

CAT40 Collet Chucks DA 180

  • Poway, California, United States
  • Jan 30th
CNC LATHE A-6 COLLET NOSE W/HARDINGE S-26 COLLET MASTER + 2-5/8" + ADAPTER

CNC LATHE A-6 COLLET NOSE W/HARDINGE S-26 COLLET MASTER + 2-5/8" + ADAPTER

  • Highland, New York, United States
  • Jan 30th
JACOBS RUBBER FLEX COLLET CHUCK L-1 LATHE SPINDLE MOUNT 1/16" - 1-3/8" COLLETS

JACOBS RUBBER FLEX COLLET CHUCK L-1 LATHE SPINDLE MOUNT 1/16" - 1-3/8" COLLETS

  • Highland, New York, United States
  • Jan 30th
SHARS CAT40 1/2" Keyless Drill Chuck Integral Shank CAT 40 Ball Bearing

SHARS CAT40 1/2" Keyless Drill Chuck Integral Shank CAT 40 Ball Bearing

  • Pelion, South Carolina, United States
  • Jan 30th
Valenite Collet holders - Cat40 - 2 holders

Valenite Collet holders - Cat40 - 2 holders

  • Kieler, Wisconsin, United States
  • Jan 30th
3/4" shank collet holers - 2 pieces

3/4" shank collet holers - 2 pieces

  • Kieler, Wisconsin, United States
  • Jan 30th
3 ACURA-FLEX COLLET CHUCK EXTENSION HOLDER 1/2" SHAFT 6.5" LONG machinist tool*8

3 ACURA-FLEX COLLET CHUCK EXTENSION HOLDER 1/2" SHAFT 6.5" LONG machinist tool*8

  • Thomaston, Connecticut, United States
  • Jan 30th
2 TECHLEADER E3 40 TG 100 VDI-40-SHANK TG 100 COLLET CHUCKS

2 TECHLEADER E3 40 TG 100 VDI-40-SHANK TG 100 COLLET CHUCKS

  • Euclid, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

5 (five) 5C Collets - 1/8' 3/16" 1/4" 5/16" 3/8"

5 (five) 5C Collets - 1/8' 3/16" 1/4" 5/16" 3/8"

  • Shushan, New York, United States
  • May 12th
HARDINGE 5C EXPANDING COLLETS 2 PCS.

HARDINGE 5C EXPANDING COLLETS 2 PCS.

  • Haverhill, Massachusetts, United States
  • May 12th
GUSTLOFF-WERKE MDL. A1000/35 SLOTTER, 35cm CAPACITY, X TRAVEL-53'', Y-TABLE

GUSTLOFF-WERKE MDL. A1000/35 SLOTTER, 35cm CAPACITY, X TRAVEL-53'', Y-TABLE

  • Miami, Florida, United States
  • May 13th
Sine Bar,2.5 inch n one inch wide

Sine Bar,2.5 inch n one inch wide

  • Red Lion, Pennsylvania, United States
  • Jun 2nd
HARDINGE H4 HORIZONTAL 360 5C COLLET MILL INDEXING TOOL FIXTURE - USED

HARDINGE H4 HORIZONTAL 360 5C COLLET MILL INDEXING TOOL FIXTURE - USED

  • Arlington Heights, Illinois, United States
  • Jun 3rd
LOT OF ARMSTRONG 5 " WEDGE SETUP TOOLS

LOT OF ARMSTRONG 5 " WEDGE SETUP TOOLS

  • El Monte, California, United States
  • Jun 3rd
Vintage Armstrong #106 Steel C-Clamp 6" Max. Capacity, 1 1/2" Min. Capacity~

Vintage Armstrong #106 Steel C-Clamp 6" Max. Capacity, 1 1/2" Min. Capacity~

  • Saint Marys, Pennsylvania, United States
  • Jun 16th
VINTAGE MACHINIST PARALLEL CLAMP machine tool 3 1/4" Jaws BROWN & SHARPE 754-D-2

VINTAGE MACHINIST PARALLEL CLAMP machine tool 3 1/4" Jaws BROWN & SHARPE 754-D-2

  • Rushville, Indiana, United States
  • Jun 16th
KAKUTA HV 451-B DURATOOL 12135 VERTICAL TOGGLE CLAMP

KAKUTA HV 451-B DURATOOL 12135 VERTICAL TOGGLE CLAMP

  • Los Angeles, California, United States
  • Jun 17th
6" chuck

6" chuck

  • Perris, California, United States
  • Jun 27th
15" Four Jaw Chuck. L1 Taper Attachment.

15" Four Jaw Chuck. L1 Taper Attachment.

  • Seekonk, Massachusetts, United States
  • Jun 27th
3 Cushman Tracksters

3 Cushman Tracksters

  • Nederland, Texas, United States
  • Jun 27th
3 1/2" MACHINE VISE

3 1/2" MACHINE VISE

  • California, United States
  • May 24th
MACHINIST TOOLS LATHE Machinist 2 RARE Starrett MICRO Small Vise s for Set Up

MACHINIST TOOLS LATHE Machinist 2 RARE Starrett MICRO Small Vise s for Set Up

  • Morris Plains, New Jersey, United States
  • May 24th
OTMT Motor MOTOR FOR CQ6232E 220V, 3PH

OTMT Motor MOTOR FOR CQ6232E 220V, 3PH

  • Duncan, South Carolina, United States
  • May 24th
MT1 STEEL DEAD CENTER

MT1 STEEL DEAD CENTER

  • Gallatin, Tennessee, United States
  • May 26th
READY TOOL Co R24HD Morse Taper #4 Live Center

READY TOOL Co R24HD Morse Taper #4 Live Center

  • Suffern, New York, United States
  • May 26th
No 5 Cleveland Twist Drill Co. Tapered Lathe Dead Center # 6333

No 5 Cleveland Twist Drill Co. Tapered Lathe Dead Center # 6333

  • Newport News, Virginia, United States
  • May 26th
LinTech X/Y Positioning Table Workholding Cross Slide System- NOS, Custom made

LinTech X/Y Positioning Table Workholding Cross Slide System- NOS, Custom made

  • Olympia, Washington, United States
  • Jun 1st
5 - 5/32" Wingnut Clecos - Genuine Kwik-Lok Cleco Fasteners with 0-1/2 Grip

5 - 5/32" Wingnut Clecos - Genuine Kwik-Lok Cleco Fasteners with 0-1/2 Grip

  • Weatherford, Texas, United States
  • Jun 1st
machinist tools

machinist tools

  • Ventura, California, United States
  • Jun 2nd
Troyke CS-9 9" Cross Slide XY Table

Troyke CS-9 9" Cross Slide XY Table

  • DeKalb, Illinois, United States
  • Jun 5th
VELMEX A6009B-56 UNISLIDE COMPLETE ROTARY TABLE / SLIDE SYSTEM WITH CONTROL

VELMEX A6009B-56 UNISLIDE COMPLETE ROTARY TABLE / SLIDE SYSTEM WITH CONTROL

  • La Puente, California, United States
  • Jun 5th
Rotary Table N.C. Producto Machine Co. 36", Tilting, mod 3032

Rotary Table N.C. Producto Machine Co. 36", Tilting, mod 3032

  • Wichita, Kansas, United States
  • Jun 5th
THREE SETS OF PARALLELS - 6", 7" & 8" LONG

THREE SETS OF PARALLELS - 6", 7" & 8" LONG

  • Newbury, Ohio, United States
  • Jun 6th
TWO MACHINIST 7" BY 1 1/8" HOLD DOWNS

TWO MACHINIST 7" BY 1 1/8" HOLD DOWNS

  • Newbury, Ohio, United States
  • Jun 6th
BRAND NEW TWO PAIR 3" CAST IRON V- BLOCKS 3" X 1-3/4" X 2-3/8"

BRAND NEW TWO PAIR 3" CAST IRON V- BLOCKS 3" X 1-3/4" X 2-3/8"

  • Garden Grove, California, United States
  • Jun 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies