+ Post new Ad
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 0
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 1
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 2
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 3
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 0
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 1
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 2
Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank, US $92 – Picture 3

Boring Head Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank

US $92

  • Rome, New York, United States
  • Feb 13th
Open on mobile:
QR code
Criterion 3/8” 1/2 ” Travel Micrometer Type Feed 1” Shank This is a Very Nice Tool in Very Good Condition with no OPP’s Marks or signs of Misuse. Boring head ways work smoothly & have adjustable Gibs. Combine Wins & Save Shipping $$$$$. Have FUN BIDDING & GOOD LUCK “Check out my other items!”   Hi my name is David;        WHERE APPLICABLE I will COMBINE SALES  “Please E-Mail me & I will Hold your items until your done bidding” . ANY INCREASE IN POSTAGE DUE TO WEIGHT INCREASE or Size WILL APPLY PLUS A MINIMAL Handling CHARGE Per Item ($1.50).  The more you combine the more you will save in Shipping Charges. Shipping Charges can be pre calculated upon request.       ALL INTERNATIONAL BIDDERS PLEASE READ SELLERS PAYMENT INSTRUCTIONS. Insurance & Tracking #’s are at the buyers expense upon request.           If you have any problems with any of my items Please email me so we can try to resolve problem outside of Ebay.                                Over the next few months I will be adding items daily. If you are looking for something particular contact me if I have it I will post it or possibly I can locate it. Item # GS-j54     
“See Pic's & Desc.”
Manufacturer Criterion
Model Micrometer Type Feed 1” S
Country/Region of Manufacture United States
MPN NA
Brand Criterion

Directions

Similar products from Drilling Heads & Tool Holders

UNIMERCO BORING INDEXABLE TOOLHOLDER P221 CONCEPT 1 / 10.5"

UNIMERCO BORING INDEXABLE TOOLHOLDER P221 CONCEPT 1 / 10.5"

  • New Britain, Connecticut, United States
  • Feb 13th
KENNAMETAL E10STFPR2 SOLID CARBIDE INDEXABLE BORING BAR 5/8" SHANK

KENNAMETAL E10STFPR2 SOLID CARBIDE INDEXABLE BORING BAR 5/8" SHANK

  • New Britain, Connecticut, United States
  • Feb 13th
SNAP-TAP (DENMARK) CNR 00075 7-16 THREADING / BORING BAR

SNAP-TAP (DENMARK) CNR 00075 7-16 THREADING / BORING BAR

  • New Britain, Connecticut, United States
  • Feb 13th
SNAP-TAP CNR 00075 7-10 THREADING / BORING BAR 3/4" 12NR2.39PD

SNAP-TAP CNR 00075 7-10 THREADING / BORING BAR 3/4" 12NR2.39PD

  • New Britain, Connecticut, United States
  • Feb 13th
ISCAR SELF-GRIP PARTING & GROOVING TOOLHOLDER SGTFR 25.4-5 RIGHT HAND

ISCAR SELF-GRIP PARTING & GROOVING TOOLHOLDER SGTFR 25.4-5 RIGHT HAND

  • New Britain, Connecticut, United States
  • Feb 13th
8 PIECE 3/4 INCH ROUND SHANK INDEXABLE BORING BAR SET (1001-0708)

8 PIECE 3/4 INCH ROUND SHANK INDEXABLE BORING BAR SET (1001-0708)

  • Chino, California, United States
  • Feb 13th
MONARCH BORING TOOL HOLDER - 2",1 1/2" & 1"

MONARCH BORING TOOL HOLDER - 2",1 1/2" & 1"

  • Franklin Park, Illinois, United States
  • Feb 13th
Criterion DBL-202 Boring head kit

Criterion DBL-202 Boring head kit

  • Auburn Hills, Michigan, United States
  • Feb 13th
NEW MEDA PRECISION ADJUSTABLE BORING HEAD 3.00" (2395003) 3/4"-Hole size

NEW MEDA PRECISION ADJUSTABLE BORING HEAD 3.00" (2395003) 3/4"-Hole size

  • Fairfield, Iowa, United States
  • Feb 13th
Vintage Williams No. 81 Agrippa Boring Tool Holder with Sleeve Bar & Wrench

Vintage Williams No. 81 Agrippa Boring Tool Holder with Sleeve Bar & Wrench

  • Brattleboro, Vermont, United States
  • Feb 13th
KDK Style #105 Boring Bar Holder

KDK Style #105 Boring Bar Holder

  • Anaheim, California, United States
  • Feb 13th
KDK #205 QUICK CHANGE BORING BAR HOLDER

KDK #205 QUICK CHANGE BORING BAR HOLDER

  • Anaheim, California, United States
  • Feb 13th
New Sandvik Coromant 1" Shank Boring Bar A16T-SCLCR 3 Cnc Lathe Mill Indexable

New Sandvik Coromant 1" Shank Boring Bar A16T-SCLCR 3 Cnc Lathe Mill Indexable

  • Redwood City, California, United States
  • Feb 13th
New Sandvik Coromant A12S-SCLCR 3. 3/4 Shank Boring Bar Cnc Lathe Mill

New Sandvik Coromant A12S-SCLCR 3. 3/4 Shank Boring Bar Cnc Lathe Mill

  • Redwood City, California, United States
  • Feb 13th
Armstrong Holder and Boring / threading Bar for lathe machinist toolmakers tools

Armstrong Holder and Boring / threading Bar for lathe machinist toolmakers tools

  • Reynoldsburg, Ohio, United States
  • Feb 13th
BHR8B APT PRECISION OFFSET STANDARD BORING HEAD (R8) TAPER SHANK MODEL #223-1050

BHR8B APT PRECISION OFFSET STANDARD BORING HEAD (R8) TAPER SHANK MODEL #223-1050

  • New Britain, Connecticut, United States
  • Feb 13th
Boring Bar Head 1-1/4" DH H20-MTFNL4 <1986>

Boring Bar Head 1-1/4" DH H20-MTFNL4 <1986>

  • Saint Louis, Missouri, United States
  • Feb 13th
Boring Bar Head 1-1/4&#034; RH MSKNR-4 &lt;1992&gt;

Boring Bar Head 1-1/4" RH MSKNR-4 <1992>

  • Saint Louis, Missouri, United States
  • Feb 13th
Threading Boring Bar Head 1&#034; DH H16-LSEL3 &lt;1989&gt;

Threading Boring Bar Head 1" DH H16-LSEL3 <1989>

  • Saint Louis, Missouri, United States
  • Feb 13th
Boring Bar Head 1-1/2&#034; DH H24-MTFNL4 &lt;1986&gt;

Boring Bar Head 1-1/2" DH H24-MTFNL4 <1986>

  • Saint Louis, Missouri, United States
  • Feb 13th

People who viewed this item also vieved

CAT 40 KOMET Boring Head B3015010 ABS 63 FF 79-94mm And Holder

CAT 40 KOMET Boring Head B3015010 ABS 63 FF 79-94mm And Holder

  • Lake Village, Indiana, United States
  • Jan 30th
CAT50 HOLDER FOR RENISHAW PROBE M/2045/0071

CAT50 HOLDER FOR RENISHAW PROBE M/2045/0071

  • Schwenksville, Pennsylvania, United States
  • Jan 30th
NEW MGIVR2520-2 Internal Right Hand Grooving Bar TOOL HOLDER for CNC LATHE

NEW MGIVR2520-2 Internal Right Hand Grooving Bar TOOL HOLDER for CNC LATHE

  • ShangHai, China
  • Jan 30th
SANDVIK CUT-OFF BLADE 151.2-21-30

SANDVIK CUT-OFF BLADE 151.2-21-30

  • Indianapolis, Indiana, United States
  • Jan 30th
NEW 1&#034; SANDVIK SILENT TOOLS DAMPED DEVIBE BORING BAR W/ HEAD A570-3C D16 10-25

NEW 1" SANDVIK SILENT TOOLS DAMPED DEVIBE BORING BAR W/ HEAD A570-3C D16 10-25

  • Cleveland, Ohio, United States
  • Jan 30th
General Tools #165 Professional Reversible Ratchet Tap Wrench Set #0 - 1/2&#034; Taps

General Tools #165 Professional Reversible Ratchet Tap Wrench Set #0 - 1/2" Taps

  • Venice, Florida, United States
  • Jan 30th
DT 21/32&#034; Z Type Double Taper Collet

DT 21/32" Z Type Double Taper Collet

  • Chicago, Illinois, United States
  • Feb 14th
DT 5/8&#034; Z Type Double Taper Collet

DT 5/8" Z Type Double Taper Collet

  • Chicago, Illinois, United States
  • Feb 14th
Lot of (39) Air-Feed Drill Bushings 23000 Series, 1 1/4-12 UNF L.H. Thread

Lot of (39) Air-Feed Drill Bushings 23000 Series, 1 1/4-12 UNF L.H. Thread

  • Compton, California, United States
  • Feb 15th
Browning #P111/4 Split Taper Bushing, 1-1/4&#034; Bore, 3&#034; Dia. ~ (Off2A)

Browning #P111/4 Split Taper Bushing, 1-1/4" Bore, 3" Dia. ~ (Off2A)

  • Saint Louis, Missouri, United States
  • Feb 15th
RICHMILL BT 50 3/4&#034; END MILL HOLDER BT50 SL3/4 75 3&#034; PROJ &#034;QTY1&#034; (LOC1398B)

RICHMILL BT 50 3/4" END MILL HOLDER BT50 SL3/4 75 3" PROJ "QTY1" (LOC1398B)

  • Laingsburg, Michigan, United States
  • Feb 21st
27 X 60MM BT40 V-FLANGE SHELL MILL ARBOR (3900-4245)

27 X 60MM BT40 V-FLANGE SHELL MILL ARBOR (3900-4245)

  • Chino, California, United States
  • Feb 23rd
Cushman drill chuck cap 1/8- 3/4 with No. 3 morse taper (ref#147)

Cushman drill chuck cap 1/8- 3/4 with No. 3 morse taper (ref#147)

  • Wrentham, Massachusetts, United States
  • Mar 5th
2 MORSE TAPER SHANK - 1/2&#034; DRILL CHUCK mill lathe tool holder JACOBS USA No. 33

2 MORSE TAPER SHANK - 1/2" DRILL CHUCK mill lathe tool holder JACOBS USA No. 33

  • Milroy, Indiana, United States
  • Mar 5th
1&#034; &amp; 1-1/4&#034; ENDMILL TOOL HOLDERS w/ NMTB30 SHANKS

1" & 1-1/4" ENDMILL TOOL HOLDERS w/ NMTB30 SHANKS

  • Covina, California, United States
  • Mar 10th
ALORIS DA TOOL POST SET 6 PIECES

ALORIS DA TOOL POST SET 6 PIECES

  • Edison, New Jersey, United States
  • Mar 10th
grinding machine ,milling machine sliding swinging indexing t slot attachment

grinding machine ,milling machine sliding swinging indexing t slot attachment

  • Petersburg, Virginia, United States
  • May 24th
Lot of two completely new spindles with labels. Made in USSR.

Lot of two completely new spindles with labels. Made in USSR.

  • Ul'yanovsk, Ul'yanovskaya obl, Russian Federation
  • May 24th
SUNNEN HONE MANDREL WITH ADAPTER K6-200CH STK 5143

SUNNEN HONE MANDREL WITH ADAPTER K6-200CH STK 5143

  • Wadley, Alabama, United States
  • May 25th
New Sunnen MMT-0118NM45R Mandrel Turbohone ML Use Only Turbo Hone Rougher

New Sunnen MMT-0118NM45R Mandrel Turbohone ML Use Only Turbo Hone Rougher

  • Westland, Michigan, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies