Brand New Gw Instek Sfg-2110 10mhz Dds Function Generator With Am/fm/log/lin

US $478.00

  • China, China
  • Jan 29th
Brand New GW Instek SFG-2110 10MHz DDS Function Generator with AM/FM/LOG/LIN It can be sent to the whole world, if you are in the excluded shipping locations, please contact us to get quotations. Features: *DDS Technique and FPGA Chip Design *Frequency Range : 0.1Hz~4/10MHz *High Frequency Accuracy : ± 20ppm *Frequency Resolution : 100mHz *Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz *Front Panel Setting Save/Recall with 10 Groups of Setting Memories *Built-In 9 Digits,150MHz/High Resolution Counter(SFG-2110 Only) *INT/EXT AM/FM Modulation (SFG-2110 Only) *LIN/LOG Sweep Mode(SFG-2110 Only) Description: Based on the Direct Digital Synthesized (DDS) technology and unique FPGA design, the SFG-2000/2100 Series Function Generators are built with exceptionally high performance far exceeding that of any conventional function generators at a very competitive price. Stable output frequency, low distortion, and fine frequency resolution are the most remarkable characteristics of this product series. The SFG-2000/2100 Series include four members in each family at 4MHz and 10MHz bandwidth(perivd), The SFG-2100 Series have additional functions of Sweep, AM/FM modulation, and External Counter. As a result of the 20ppm stability level and output waveform accuracy, The SFG-2000/2100 Series well fit into a wide variety of applications, such as signal generator for experiment labs, reference signal for PLL (Phase Locked Loop), and calibration and adjustment source for electronic devices. OUTPUT WAVEFORM   The SFG-2000/2100 Series provide Sine, Triangle and Square waveforms with DC offset and variable duty cycle at 20ppm frequency stability and accuracy. The low drift rate and -55dBc low sine wave distortion output significantly extend product application range in various market sectors. The TTL/CMOS output is also available to fulfill various requirements. In addition to the basic functions, The SFG-2100 Series provide advanced functions such as AM/FM modulation, sweep mode, and Built-In Frequency Counter. DDS FG VS. CONVENTIONAL FG   The SFG-2000/2100 Series generates signals by continuously delivering a series of sampling values from a sine waveform table (stored in RAM) to DAC (Digital to Analog Converter) for waveform construction. With a low pass filter circuit to filter out the harmonics of the DAC output and smooth the signal, the SFG-2000/2100 Series is able to provide a stable output with very low waveform distortion. This is very different from the way a conventional FG generates a signal. Since a conventional FG needs to obtain its signal by switching current sources between positive and negative directions all the time, the "Ringing" distortion occurs at the peak of the signal waveform where the switching is activated. This distortion is especially serious when the output amplitude is low. For the SFG-2000/2100 DDS FG, however, the waveform distortion remains low even when the output amplitude is at only 2mVpp. Specification:   SFG-2000 Series SFG-2100 Series Main Frequency Range (Sine, Square) SFG-2004 : 0.1Hz ~ 4MHz SFG-2010 : 0.1Hz ~ 10MHz SFG-2110 : 0.1Hz ~ 10MHz Frequency Range (Triangle) 0.1Hz~1MHz  Frequency Resolution 0.1Hz Frequency Stability ± 20 ppm Frequency Accuracy ± 20 ppm Aging ± 5 ppm /year Output Function Sine, Square, Triangle Amplitude Range 2mV~10Vpp(50? Load) Impedance 50?±10% Attenuator -20dB±1dBx2 DC Offset +5V(50? Load) Duty Cycle 20% to 80%, 2Hz~1MHz (Only Square) Range Resolution 1% Display 9 ? LED display SINE WAVE Harmonics Distortion -55dBc,0.1Hz~200kHz; -40dBc,0.2MHz~4MHz; -30dBc,4MHz~10MHz (Specification applied to both TTL/CMOS OFF and from MAX. to 1/10 level) Flatness(Relative to 1kHz)
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model SFG-2110
Country of Manufacture Taiwan, Province of China
Manufacturer GW Instek

Directions

Similar products from Function Generator Modules

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies