Brand New Usb Rs232 Universal Programmer Eprom Nand Mcu Pic Avr "triton V5.7tu"

US $455.00

Kazan, Russian Federation
Feb 23rd

Open on mobile:
QR code

Ltd. "TC Triton" is a stand-alone universal programmer chips for use in mass production, as well as for the development, maintenance, and repair any electronic equipment. Support for more than 18,000 memory chips and microcontrollers, interface USB 2.0, high-speed and full-featured programming work offline. Powerful and easy to use software, regular free updates, the ability to self-expanding list of chips and create your own programming algorithms, operational and competent technical support. Professional high-speed chip programmer with USB interface and the ability of battery life. The best choice for use in mass production, repair and maintenance of equipment in the field. Highest quality recording chips, 100% reliability of the programmer, intuitive, simple and very user friendly interface. Optimized circuit programmer, modern processor and high-speed USB interface provides an excellent speed of the chips. A virtual processor in the programmer and the compiler script file in the shell where you can write your own algorithms with chips. The instruction set of a virtual processor, specially designed for programming chip incorporates all control functions conclusions sockets programming, developed condition checking, complex routines that provide on-off power circuits, input-output data in serial or parallel form work files, the dialogue with the user, the call of their own routines and normal operation of the memory of the programmer that allows you to create a simple and efficient code that enables high-speed processing chip. Unlike the previous model V5.7TM, a new programmer V5.7TU made on 4-layer board that almost completely remove the intrinsic noise of the programmer, greatly improve the stability of a chip at high speeds and expand the range of voltages supported chips. The new firmware for the high-speed USB 3-4 provides fold increase reading speed for the memory chips of large volumes (Flash, Nand-flash, SPI-flash). The software works with all versions of Windows, including Win7 and Win8 (32 and 64 bit). To work in LINUX using emulator Windows - WINE. The software has a variety of settings that determine the appearance of the program as well as work order programmer with programmable chips that allows the programmer to deal with various tasks such as printing and debugging. While working with a chip programmer continuously monitors the integrity of the open file and downloaded data, which completely eliminates the entry of incorrect information in the chip. In memory of the programmer can be stored: 1018 chip types, 256 files and projects, totaling up to 4 MB. Software on your computer to download, sort, delete, rename and upload files, projects and lists of chips. In standalone mode, the programmer provides a quick and easy selection of any chip also features automatic determination of the type of chip. Read from the data stored in the IC memory in the form of programming and files can be recorded in the same or any other chip. Memory programmer has a file structure that allows without using a computer, it is easy to select or delete any file by simply scrolling through the list. Menu programming offline allows you to select the chip, file, or project, to enable or disable the encryption, delete the file and create an operational configuration. Any of the six stand-alone mode with a chip select and start the touch of a button. When programming the chip for one press runs full cycle: erase and check for cleanliness, record the main memory, one or two control verification, record EEPROM, Fuses and installation protection. For convenience in replication mode, the display shows counter-programmed chips. When loaded into memory of the programming project, it stores all data on a programmable chip, including the modes of operation voltage, the address configuration of bits protection, etc., as well as the executable code algorithm describing the operation of this IC chip. Thus, the software allows you to not only create a unique ability to work with a chip, but also to work with it, using all the possibilities for programming. Reading and writing chips time Firmware "USB" Firmware "Standard" AT27C080 6 / 82sec. 17 / 88sec. AM29LV160DB 10 / 55sec. 30 / 60sec. K9F1G08U0M ~12 / ~20min. ~38 / ~31min. MX25L1605 52 / 158sec. 173 / 268sec. The cycle time of reading (reading and reconciliation) / write cycle time (deleting, checking account and a reconciliation) The software works with all versions of Windows, including Win7 and Win8 (32 and 64 bit). To work in LINUX using emulator Windows - WINE. The software has a variety of settings that determine the appearance of the program as well as work order programmer with programmable chips that allows the programmer to deal with various tasks such as printing and debugging. While working with a chip programmer continuously monitors the integrity of the open file and downloaded data, which completely eliminates the entry of incorrect information in the chip. In memory of the programmer can be stored: 1018 chip types, 256 files and projects, totaling up to 4 MB. Software on your computer to download, sort, delete, rename and upload files, projects and lists of chips. In standalone mode, the programmer provides a quick and easy selection of any chip also features automatic determination of the type of chip. Read from the data stored in the IC memory in the form of programming and files can be recorded in the same or any other chip. Memory programmer has a file structure that allows without using a computer, it is easy to select or delete any file by simply scrolling through the list. Menu programming offline allows you to select the chip, file, or project, to enable or disable the encryption, delete the file and create an operational configuration. Any of the six stand-alone mode with a chip select and start the touch of a button. When programming the chip for one press runs full cycle: erase and check for cleanliness, record the main memory, one or two control verification, record EEPROM, Fuses and installation protection. For convenience in replication mode, the display shows counter-programmed chips. When loaded into memory of the programming project, it stores all data on a programmable chip, including the modes of operation voltage, the address configuration of bits protection, etc., as well as the executable code algorithm describing the operation of this IC chip. Thus, the software allows you to not only create a unique ability to work with a chip, but also to work with it, using all the possibilities for programming. List of chips supported by PG TRITON. Main characteristics TRITON + programmers. TRITON + V5.7TU programmer comes in a black color. Size programmer - 170h100h23mm. Weight - 235g. Shipping weight - 460g (530g with COM cable). Free software updates via the Internet. The package includes: programmer, software CD, power adapter and USB cable to connect to a computer (if needed COM cable, it must be specified when ordering).

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	TRITON
Country/Region of Manufacture	Russian Federation
Model	V5.7TU