+ Post new Ad
Bridgeport Style Right Angle Bracket Pedestal Base Rotary Table Milling Machine, US $4943 – Picture 0
Bridgeport Style Right Angle Bracket Pedestal Base Rotary Table Milling Machine, US $4943 – Picture 0

Bridgeport Style Right Angle Bracket Pedestal Base Rotary Table Milling Machine

US $4943

  • Escondido, California, United States
  • Nov 4th
Open on mobile:
QR code
This auction is for the right angle pedestal base casting that supports some brands of rotary tables at 90 degrees (vertical) on a milling machine table This one measures about 11-7/8" tall by 9" wide by 10-1/8" deep. The slot milled into the bottom face of the base is 5/8" wide The mounting holes spacing is as follows; See picture #4;  the diagonal spacing between the top and bottom mounting holes is about 10-1/32" (approx. 255mm ) See picture #5; the top two mounting holes are about  6-11/16 " wide apart   (approx.  170mm) See picture #6; The bottom two mounting holes are  about 3-1/8" apart   (approx.  80mm) This casting weighs about 35 pounds, according to our bathroom scale. This casting still has it's original paint from when new It has some paint chipped off in a few spots and a little very light surface oxidation in a few spots where the bare cast iron was exposed But this could easily be cleaned up with a 3M Scotch-bright  pad. The original machining marks are clearly seen on the bottom of it's base with no pitting. There are several other right angle pedestal bases currently for sale on ebay that are advertised as for Bridgeport type rotary tables. The one we are selling appears to be very similar if not identical. (they look exactly the same to me) Check your rotary table's mounting point.dimensions Please contact us with any questions you might have. We welcome free local pick-up; we are 30 minutes north of San Diego

Directions

Similar products from Rotating Tables

6" Horizontal Rotary Table

6" Horizontal Rotary Table

  • Corpus Christi, Texas, United States
  • Nov 6th
Haas TR-210 5 Axis Trunnion, Brushless machine needed, 8.3" Platter

Haas TR-210 5 Axis Trunnion, Brushless machine needed, 8.3" Platter

  • Delta, British Columbia, Canada
  • Nov 6th
#550-112 YUASA (Japan) 11.8" Horizontal Rotary Table

#550-112 YUASA (Japan) 11.8" Horizontal Rotary Table

  • Smithton, Missouri, United States
  • Nov 5th
Troyke 9" Rotary Table w/ 6" Chuck

Troyke 9" Rotary Table w/ 6" Chuck

  • Spartanburg, South Carolina, United States
  • Nov 5th
Camco 601RDM6H24-2.70 Rotary Dial Indexer w/DC Power Source

Camco 601RDM6H24-2.70 Rotary Dial Indexer w/DC Power Source

  • Spring Lake, Michigan, United States
  • Nov 5th
Yuasa Indexer, Twin Spindle 5C Rotary with upgraded Controller & brushless motor

Yuasa Indexer, Twin Spindle 5C Rotary with upgraded Controller & brushless motor

  • Olathe, Kansas, United States
  • Nov 5th
Troyke DMT12 9" Cross Sliding Rotary Table

Troyke DMT12 9" Cross Sliding Rotary Table

  • Azusa, California, United States
  • Nov 5th
NT50 10HP Universal Vertical C-Frame Low RPM High Torque Milling Machine 4V

NT50 10HP Universal Vertical C-Frame Low RPM High Torque Milling Machine 4V

  • Irvine, California, United States
  • Nov 5th
TROYKE BH-9 ROTARY INDEX TABLE BRIDGEPORT MILLING MACHINING TOOL

TROYKE BH-9 ROTARY INDEX TABLE BRIDGEPORT MILLING MACHINING TOOL

  • Summitville, Indiana, United States
  • Nov 5th
ECO BS-0 Precision Dividing Head With 5" 3-jaw Chuck & Tailstock, Part#: BS-0

ECO BS-0 Precision Dividing Head With 5" 3-jaw Chuck & Tailstock, Part#: BS-0

  • CN, China
  • Nov 5th
TROYKE 18” PRECISION HORIZONTAL ROTARY TABLE ~ MODEL R-18 (#1689)

TROYKE 18” PRECISION HORIZONTAL ROTARY TABLE ~ MODEL R-18 (#1689)

  • Bosque Farms, New Mexico, United States
  • Nov 4th
New Rotary Table 4" inch (100 mm) Horizontal Vertical Model for Milling Machine

New Rotary Table 4" inch (100 mm) Horizontal Vertical Model for Milling Machine

  • New Delhi, Delhi, India
  • Nov 4th
HAAS 4th AXIS 5SC 14 PIN ROTARY INDEXER AND CONTROLLER WITH PNEUMATIC CLOSER

HAAS 4th AXIS 5SC 14 PIN ROTARY INDEXER AND CONTROLLER WITH PNEUMATIC CLOSER

  • Santa Clarita, California, United States
  • Nov 4th
L-W Chuck 11" dividing head

L-W Chuck 11" dividing head

  • Meriden, Connecticut, United States
  • Nov 4th
Small Rotary Table 3 Inches/75mm Horizontal & Vertical Model Milling Machine NEW

Small Rotary Table 3 Inches/75mm Horizontal & Vertical Model Milling Machine NEW

  • GURGAON, HARYANA, India
  • Nov 4th
2011 Haas TR2105XH Trunnion Table CNC #7786082

2011 Haas TR2105XH Trunnion Table CNC #7786082

  • Scottsdale, Arizona, United States
  • Nov 4th
3" (75 mm) Regular Horizontal Vertical Rotary Table 3 Slots+ 80 mm 3 jaws chuck

3" (75 mm) Regular Horizontal Vertical Rotary Table 3 Slots+ 80 mm 3 jaws chuck

  • New Delhi, Delhi, India
  • Nov 3rd
4"(100 mm) Horizontal Vertical Rotary Table 4 Slot+70 mm 4 Jaws Chuck+Back plate

4"(100 mm) Horizontal Vertical Rotary Table 4 Slot+70 mm 4 Jaws Chuck+Back plate

  • New Delhi, Delhi, India
  • Nov 3rd
High Precision 70 mm 4 Jaw Chuck+Back plate for 3"(75 mm) & 4"(100) rotary table

High Precision 70 mm 4 Jaw Chuck+Back plate for 3"(75 mm) & 4"(100) rotary table

  • New Delhi, Delhi, India
  • Nov 3rd
TROYKE ROTARY TABLE MODEL UP-20X MACHINE INDUSTRIAL

TROYKE ROTARY TABLE MODEL UP-20X MACHINE INDUSTRIAL

  • South El Monte, California, United States
  • Nov 3rd

People who viewed this item also vieved

SPECIAL PRICE PRECISION 18PC 9 PAIR 1/4" PARALLEL SET

SPECIAL PRICE PRECISION 18PC 9 PAIR 1/4" PARALLEL SET

  • Garden Grove, California, United States
  • Jan 30th
REXROTH RUNNER BLOCK/BALL RAIL MNRR16517320

REXROTH RUNNER BLOCK/BALL RAIL MNRR16517320

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
REXROTH RUNNER BLOCK MNR 1853-413-10

REXROTH RUNNER BLOCK MNR 1853-413-10

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
GARDNER DENVER COPPER MOTOR TOOL 921220

GARDNER DENVER COPPER MOTOR TOOL 921220

  • Sunman, Indiana, United States
  • Jan 30th
Lot Lathe Taper Dead Center Shank

Lot Lathe Taper Dead Center Shank

  • Mokena, Illinois, United States
  • Jan 30th
THE READY TOOL CO. LIVE CENTER - #6MT SHANK - MORSE TAPER - RITEN - ROYAL

THE READY TOOL CO. LIVE CENTER - #6MT SHANK - MORSE TAPER - RITEN - ROYAL

  • Pomona, California, United States
  • Jan 30th
UNUSED! CUSHMAN 10" THREE-JAW LATHE CHUCK w/ L1 MOUNT

UNUSED! CUSHMAN 10" THREE-JAW LATHE CHUCK w/ L1 MOUNT

  • Covina, California, United States
  • Jan 30th
5-1/2" L00 BACK PLATE FOR 3, 4 And 6 JAW LATHE CHUCK - 2-1/8" HOLE THRU

5-1/2" L00 BACK PLATE FOR 3, 4 And 6 JAW LATHE CHUCK - 2-1/8" HOLE THRU

  • San Diego, California, United States
  • Jan 30th
UNION 15" 4 JAW LATHE CHUCK L0 MOUNT

UNION 15" 4 JAW LATHE CHUCK L0 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
DE STA CO Hold down clamps

DE STA CO Hold down clamps

  • Ontario, California, United States
  • Jan 30th
LOT 4 ZERO-FLEX 2-1/2-07 FIRE PIPE CLAMP COUPLER RIDIG SIZE 2-1/2IN B330406

LOT 4 ZERO-FLEX 2-1/2-07 FIRE PIPE CLAMP COUPLER RIDIG SIZE 2-1/2IN B330406

  • Buffalo, New York, United States
  • Jan 30th
Varian Agilent Single Claw Aluminum Clamp with Bolt Washer ICS160250A Lot of 15

Varian Agilent Single Claw Aluminum Clamp with Bolt Washer ICS160250A Lot of 15

  • Dracut, Massachusetts, United States
  • Jan 30th
USED BIG-DAISHOWA BT40 NBN-16 NEW BABY COLLET CHUCK BHDT-90007

USED BIG-DAISHOWA BT40 NBN-16 NEW BABY COLLET CHUCK BHDT-90007

  • Fairfield, Iowa, United States
  • Jan 30th
USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90014

USED BIG-DAISHOWA BT40 NBN-10 NEW BABY COLLET CHUCK BHDT-90014

  • Fairfield, Iowa, United States
  • Jan 30th
USED BIG-DAISHOWA BT40 NBN-16 NEW BABY COLLET CHUCK BHDT-90003

USED BIG-DAISHOWA BT40 NBN-16 NEW BABY COLLET CHUCK BHDT-90003

  • Fairfield, Iowa, United States
  • Jan 30th
Hardinge #10 B&S 3/16" X 3/8" Rectangle Stop Collet

Hardinge #10 B&S 3/16" X 3/8" Rectangle Stop Collet

  • Chicago, Illinois, United States
  • Jan 30th
Hardinge #10 B&S 1/8" X 1/4" Rectangle Stop Collet

Hardinge #10 B&S 1/8" X 1/4" Rectangle Stop Collet

  • Chicago, Illinois, United States
  • Jan 30th
Hardinge #10 B&S 5/32" Square Stop Collet

Hardinge #10 B&S 5/32" Square Stop Collet

  • Chicago, Illinois, United States
  • Jan 30th
cisco 2960POE-8 Switch Faceplate for Replacement

cisco 2960POE-8 Switch Faceplate for Replacement

  • Hong kong, Hong Kong
  • Jan 30th
cisco 3560 V2 DC-24 Faceplate for Replacement

cisco 3560 V2 DC-24 Faceplate for Replacement

  • Hong kong, Hong Kong
  • Jan 30th
cisco 3560 V2 POE-48 Switch Faceplate for Replacement

cisco 3560 V2 POE-48 Switch Faceplate for Replacement

  • Hong kong, Hong Kong
  • Jan 30th
10 INCH SEMI-UNIVERSAL DIVIDING HEAD SET

10 INCH SEMI-UNIVERSAL DIVIDING HEAD SET

  • Chino, California, United States
  • Jan 30th
Suburban compound magnasine 6" X 6" model no. SPC66 , MC-66-FP

Suburban compound magnasine 6" X 6" model no. SPC66 , MC-66-FP

  • Addison, Illinois, United States
  • Jan 30th
Acme Gridley 9/16" RA-RAN 6 air pick off attachment

Acme Gridley 9/16" RA-RAN 6 air pick off attachment

  • Arlington, Texas, United States
  • Jan 30th
Wilton 63500 3VB 2-3/4in Vacuum Base Vise

Wilton 63500 3VB 2-3/4in Vacuum Base Vise

  • Palatine, Illinois, United States
  • Jan 30th
NICE! CHICAGO MEAD H42-6 PNEUMATIC VISE W/ 2-1/2" WIDE JAWS

NICE! CHICAGO MEAD H42-6 PNEUMATIC VISE W/ 2-1/2" WIDE JAWS

  • Chino, California, United States
  • Jan 30th
Wilton Rapid Acting Vise Part 7RA

Wilton Rapid Acting Vise Part 7RA

  • Morgan Hill, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies