bronze door threshold for sale, brand-new and used.

This listing is for a Pair of 30" x 80" x 1-3/4" Therma-tru Traditions TS100 It is prehung and includes the door frame as pictured which is Solid Pine wood and is 6-1/4" deep. The unit includes a 5-3/4” Bronze

This listing is for a Pair of 36" x 80" x 1-3/4" Knotty Alder Exterior Door with Half-Length Glass in a 9-Lite Design over a Single Raised Bottom Panel with (2) matching 14” sidelites. It is prehung and includes the door frame as pictured which is matching knotty alder wood and is 5-3/8" deep. The unit includes a 4-9/16” Aluminum Threshold with Adjustable Wood Cap and Aluminum U-Shaped Door Sweep.

This listing is for a Single 36" x 80" x 1-3/4" Knotty Alder Exterior Door 2-Panel Arched Top Rail Design with V-Grooves. The door includes a functioning speakeasy with grill, clavos (rustic nail heads) and strap hinges. It is prehung and includes the door frame as pictured which is matching knotty alder wood and is 4-9/16" deep.

This listing is for a 36" x 96" x 1-3/4" Knotty Alder 2 Panel Top-Rail Arch Exterior Door with (2) Full-Length Glass 14" Sidelite. It is prehung and includes the door frame which is matching knotty alder wood and is 4-9/16" deep. The unit includes a Matching 4-9/16” Aluminum Threshold with Adjustable Wood Cap and Aluminum U-Shaped Door Sweep.

This listing is for a 36" x 96" x 1-3/4" Knotty Alder 2 Panel Top-Rail Arch Exterior Door with Full-Length Glass 14" Sidelite. It is prehung and includes the door frame which is matching knotty alder wood and is 4-9/16" deep. The unit includes a Matching 4-9/16” Aluminum Threshold with Adjustable Wood Cap and Aluminum U-Shaped Door Sweep.

3-6 x 7-0 narrow stile commercial storefront door with non transom frame in bronze of silver finish.Custom colored powder coat can be added (The frame is 1 3/4" x 4 1/2" and the rough opening is 46x 86"). No glass with this door. Glass can be added and glazed into the door.

BOTTOM ROD AND LATCH MISSING Trim: - Archer, August, or Withnell lever with escutcheon - Archer, August, Withnell lever with key-in-lever trim - Raised lip pull - Pull plate trim - Rim cylinder x optional pull Covers: - Casted brass, bronze, stainless steel, zinc Chassis:

1 Each 6' 0" x 7' 0" Cardinal Commercial Products dark bronze aluminum storefront doors and transom KD doorframe for minimal assembly. 1 3/4 x 4 1/2" frame. Tip to tip frame size is 75 1/2" by up to 125".Includes hydraulic door closers, push/ pull set, door sweep, pivots, threshold.

1 Each 6' 0" x 7' 0" Cardinal Commercial Products dark bronze aluminum storefront doors and transom KD doorframe for minimal assembly. 1 3/4 x 4 1/2" frame. Tip to tip frame size is 75 1/2" by up to 125".

NARROW STILE EXIT DEVICES TH1100-ED NARROW STILE

This is a 3-0 x 7-0 narrow stile offset pivot storefront door with non transom frame withclear annodized finish ( silver). Frame knocked down and holes pre-punched for minimal assembly. The frame is 1 3/4" x 4 1/2" and the rough opening is 40" x 86".

1 Each 3' 0" x 7' 0" Cardinal Commercial Products aluminum pivot door and non-transom fabricated KD doorframe for minimal assembly.Clear finish with 1/4" clear tempered glazed.(pictures are of bronze frame with transom, can be added)Includes hydraulic door closer, push/ pull set, door sweep, pivots, threshold. Ready to install.Manufacture direct shipping flat $100 to most cities. Free on orders of five or more doors.

This auction is for (1) Yale 7170 630 LHR exit device, for a 48 inch wide door. This is new in the original box it was shipped in. This is for a 48 inch door, not the standard 36 inch door, you may be able to cut it down to the size door you need.

These Offset Pivots are used for both flush face frame installation and 1/8“ recessed door applications. These pivots are recommended for replacement on Arch manufactured doors. Suitable for aluminum doors weighing up to 125 pounds.

These Offset Pivots are used for both flush face frame installation and 1/8“ recessed door applications. These pivots are recommended for replacement on Vistawall manufactured doors. Suitable for aluminum doors weighing up to 125 pounds.

These Offset Pivots are used for both flush face frame installation and 1/8“ recessed door applications. These pivots are recommended for replacement on Amarlite manufactured doors. Suitable for aluminum doors weighing up to 125 pounds.

These Offset Pivots are used for both flush face frame installation and 1/8“ recessed door applications. These are the TOP pivots recommended for replacement on Kawneer manufactured doors. (Look for our listing for bottom Kawneer style pivots.) Suitable for aluminum doors weighing up to 125 pounds.

These Offset Pivots are used for both flush face frame installation and 1/8“ recessed door applications. These are the BOTTOM pivots recommended for replacement on Kawneer manufactured doors. (Look for our listing for top Kawneer style pivots.) Suitable for aluminum doors weighing up to 125 pounds.