+ Post new Ad
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 0
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 1
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 2
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 3
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 4
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 5
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 6
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 7
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 8
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 0
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 1
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 2
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 3
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 4
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 5
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 6
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 7
BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION, US $1600 – Picture 8

Brown & Sharpe 510-4 Micro Mesh Permanent Magnet Chuck Very Good Used Condition

US $1600

  • Woodbury, Connecticut, United States
  • Mar 2nd
Open on mobile:
QR code
Selling my Brown & Sharpe Permanent Magnet Chuck cat # 510-4 in very good working condition.  Working surface is 5" X 10" but has extension on magnet activating arm to allow for oversize pieces.  See pics for description.  Please note there is a very small knick in the metal top surface located on the left side edge about 1 inch up from the bottom edge.  (please see photos)   SOLD AS IS....NO REFUNDS ITEM TO BE SHIPPED VIA THE USPS LARGE FLAT RATE BOX... PLEASE NOTE THIS IS A 5 DAY AUCTION AND NOT 7 DAY... PLEASE ASK ALL QUESTIONS AHEAD OF AUCTIONS CLOSE... THANK YOU
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Brown & Sharpe
Model 510-4
Country/Region of Manufacture United States

Directions

Similar products from Lathe Chucks

Brown & Sharpe Sine Plate 599 925 5 w/end stop 6" x 3" 1" CD 4.5" x 6" Base

Brown & Sharpe Sine Plate 599 925 5 w/end stop 6" x 3" 1" CD 4.5" x 6" Base

  • Glasgow, Kentucky, United States
  • Mar 3rd
Wood Lathe 4 Jaw Chuck,Face Plate 3 Planing Cutters

Wood Lathe 4 Jaw Chuck,Face Plate 3 Planing Cutters

  • Fayetteville, Pennsylvania, United States
  • Mar 3rd
5C 5" Collet Chuck Plain Back for Lathe Machine, #0269-0010

5C 5" Collet Chuck Plain Back for Lathe Machine, #0269-0010

  • TORONTO, ONTARIO, Canada
  • Mar 2nd
YUASA 6 X 12 PERMANENT MAGNETIC CHUCK NICE! *

YUASA 6 X 12 PERMANENT MAGNETIC CHUCK NICE! *

  • Edison, New Jersey, United States
  • Mar 2nd
20mm ER32 150L Straight collet chuck toolholder ER20 clamping system cnc milling

20mm ER32 150L Straight collet chuck toolholder ER20 clamping system cnc milling

  • Dongguan, China
  • Mar 2nd
10" 6 jaw Buck Chuck

10" 6 jaw Buck Chuck

  • Freedom, Pennsylvania, United States
  • Mar 2nd
COLLIS 74174 1/4-R8 HSS CNC COLLET DRILL MILLING CHUCK

COLLIS 74174 1/4-R8 HSS CNC COLLET DRILL MILLING CHUCK

  • Vallejo, California, United States
  • Mar 2nd
Buck 4" Six Jaw Chuck

Buck 4" Six Jaw Chuck

  • Valencia, California, United States
  • Mar 2nd
Huck HK-150A Manual Hydraulic Installation Tool Made In U.S.A

Huck HK-150A Manual Hydraulic Installation Tool Made In U.S.A

  • South Easton, Massachusetts, United States
  • Mar 2nd
lathe chuck 12" 4 jaw buck

lathe chuck 12" 4 jaw buck

  • Greenville, Indiana, United States
  • Mar 2nd
5" Bison 3-Jaw Lathe Chuck w/ 2-1/4" Th'd Back Plate

5" Bison 3-Jaw Lathe Chuck w/ 2-1/4" Th'd Back Plate

  • Slaughter, Louisiana, United States
  • Mar 2nd
Kitagawa chuck B-207 power Chuck 3 jaw

Kitagawa chuck B-207 power Chuck 3 jaw

  • Ortonville, Michigan, United States
  • Mar 2nd
MACHINIST LATHE MILL UNION 4 Jaw Lathe Chuck 6" 1 1/2" Center

MACHINIST LATHE MILL UNION 4 Jaw Lathe Chuck 6" 1 1/2" Center

  • Morris Plains, New Jersey, United States
  • Mar 2nd
SWEETLAND Chucks No. X1 Chuck - w/orig box - The Hoggson & Pettis MFG Co - USA

SWEETLAND Chucks No. X1 Chuck - w/orig box - The Hoggson & Pettis MFG Co - USA

  • O'Fallon, Missouri, United States
  • Mar 2nd
DRILL CHUCK, 23T3 SUPREME CHUCK, 0-1/2

DRILL CHUCK, 23T3 SUPREME CHUCK, 0-1/2

  • Norwalk, California, United States
  • Mar 2nd
Vintage Fowler T - Handle Chuck Key 1/4 Inch Square Head Wrench Lathe

Vintage Fowler T - Handle Chuck Key 1/4 Inch Square Head Wrench Lathe

  • Cicero, Indiana, United States
  • Mar 2nd
Buck T - Handle Lathe Jaw Chuck Key 1/4 Inch Square Head Wrench vtg

Buck T - Handle Lathe Jaw Chuck Key 1/4 Inch Square Head Wrench vtg

  • Cicero, Indiana, United States
  • Mar 2nd
Walker Magnetics Electromagnetic Interloc 20"x40" grinding chuck 68-AXM8348

Walker Magnetics Electromagnetic Interloc 20"x40" grinding chuck 68-AXM8348

  • Hyde Park, Massachusetts, United States
  • Mar 2nd
CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

  • Toms River, New Jersey, United States
  • Mar 2nd
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

  • Houston, Texas, United States
  • Mar 2nd

People who viewed this item also vieved

Machinists 1/10B3 5C Collet Block Set Quality Enco Chicago

Machinists 1/10B3 5C Collet Block Set Quality Enco Chicago

  • Lutz, Florida, United States
  • Jan 30th
Machinists 1/10B3 5C Collet Goody Bag INCL ROYAL !!!

Machinists 1/10B3 5C Collet Goody Bag INCL ROYAL !!!

  • Lutz, Florida, United States
  • Jan 30th
5C Collets Lot Hardinge

5C Collets Lot Hardinge

  • Roselle, Illinois, United States
  • Jan 30th
PRECISION TAIL STOCK 4" CENTER HEIGHT

PRECISION TAIL STOCK 4" CENTER HEIGHT

  • Ellington, New York, United States
  • Jan 30th
5c Collet Spin Index Fixture 360 deg

5c Collet Spin Index Fixture 360 deg

  • South Beloit, Illinois, United States
  • Jan 30th
MACHINIST LATHE MILL Lathe Dog FACE PLATE Lot for Lathe Machinist

MACHINIST LATHE MILL Lathe Dog FACE PLATE Lot for Lathe Machinist

  • Waterbury, Connecticut, United States
  • Jan 30th
SMALL MACHINIST CLAMP, NO MANUFACTURES NAME SHOWN, 4" LONG

SMALL MACHINIST CLAMP, NO MANUFACTURES NAME SHOWN, 4" LONG

  • Newport, Maine, United States
  • Feb 13th
58 PC PRO-SERIES 7/16" T-SLOT CLAMPING KIT 3/8-16 STUD STEEL MILL SET-UP SET

58 PC PRO-SERIES 7/16" T-SLOT CLAMPING KIT 3/8-16 STUD STEEL MILL SET-UP SET

  • Huntington Beach, California, United States
  • Feb 13th
LOT OF 9 Cam Clamps - Carr Lane

LOT OF 9 Cam Clamps - Carr Lane

  • Norwalk, California, United States
  • Feb 13th
Palmgren 2 1/2'' tilting base machinist tool makers vise

Palmgren 2 1/2'' tilting base machinist tool makers vise

  • Millstadt, Illinois, United States
  • Feb 13th
12 x 2 x 1.5" Oversized (Extension) Aluminum Soft Jaws for 6" Vises (6MJV12215A)

12 x 2 x 1.5" Oversized (Extension) Aluminum Soft Jaws for 6" Vises (6MJV12215A)

  • Athens, Georgia, United States
  • Feb 13th
Walton 450 Vise

Walton 450 Vise

  • Yorktown, Virginia, United States
  • Feb 13th
Live Center Sturdimatic Brand NO. 3 Morse Taper

Live Center Sturdimatic Brand NO. 3 Morse Taper

  • Maryville, Tennessee, United States
  • Feb 15th
Morse taper #6 lathe tailstock dead center

Morse taper #6 lathe tailstock dead center

  • United States
  • Feb 15th
Hardinge 5/C Center

Hardinge 5/C Center

  • Rochester, New York, United States
  • Feb 15th
Logan lathe - Mica Undercutter

Logan lathe - Mica Undercutter

  • Escanaba, Michigan, United States
  • Feb 27th
Tooling Inspectacles w/ZipCase,HeadStrap &LensCloth,20Times Mag and 2Hp LED'sUSA

Tooling Inspectacles w/ZipCase,HeadStrap &LensCloth,20Times Mag and 2Hp LED'sUSA

  • Decatur, Georgia, United States
  • Feb 28th
Vintage General Machinist Screw Jack With Box 1,000LB Capacity

Vintage General Machinist Screw Jack With Box 1,000LB Capacity

  • Aurora, Ohio, United States
  • Feb 28th
2 Lrg SCD JAPAN V Blocks 2.5x3.5x6" Set Up/Hold Down/Machinist/Lathe/Inspection

2 Lrg SCD JAPAN V Blocks 2.5x3.5x6" Set Up/Hold Down/Machinist/Lathe/Inspection

  • Twinsburg, Ohio, United States
  • May 17th
Vintage Machinist V Block

Vintage Machinist V Block

  • San Ramon, California, United States
  • May 17th
Right Angle Block

Right Angle Block

  • Rochester, New York, United States
  • May 18th
6" Horizontal Rotary Table - Used in Good Working Condition

6" Horizontal Rotary Table - Used in Good Working Condition

  • Guilford, Connecticut, United States
  • Jun 6th
HA5C HAAS INDEXER 4TH AXIS 5C BRUSHLESS 2009 YR MODEL NEVER UNPACKED

HA5C HAAS INDEXER 4TH AXIS 5C BRUSHLESS 2009 YR MODEL NEVER UNPACKED

  • Rancho Cucamonga, California, United States
  • Jun 6th
Stock Dereeler

Stock Dereeler

  • Midlothian, Illinois, United States
  • Jun 7th
23 Pcs. Bison CAT40 ER 16 CNC Chucks & Collets Package-12 Chuck,10 Collet,Wrench

23 Pcs. Bison CAT40 ER 16 CNC Chucks & Collets Package-12 Chuck,10 Collet,Wrench

  • Hamden, Connecticut, United States
  • May 24th
LOT OF 5 HARDINGE 1A COLLETS 5/32, 11/64, 3/16, 7/16, 7/32

LOT OF 5 HARDINGE 1A COLLETS 5/32, 11/64, 3/16, 7/16, 7/32

  • Murrieta, California, United States
  • May 24th
KITAGAWA 8" POWER CHUCK B08 MOUNT A2-6 THRU HOLE 1.811 MAZAK OKUMA HAAS MORI

KITAGAWA 8" POWER CHUCK B08 MOUNT A2-6 THRU HOLE 1.811 MAZAK OKUMA HAAS MORI

  • Louisville, Kentucky, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies