+ Post new Ad
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 0
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 1
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 2
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 3
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 4
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 5
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 6
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 7
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 8
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 9
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 10
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 0
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 1
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 2
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 3
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 4
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 5
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 6
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 7
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 8
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 9
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133, 2 Clamps, US $229.99 – Picture 10

Brown & Sharpe Matched Pair V-block Hardened 750b,# 133, 2 Clamps

US $229.99

  • Rehoboth, Massachusetts, United States
  • Feb 23rd
Open on mobile:
QR code
   Free Priority Shipping BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 133,  2 ClampsProduct Description Stepped groove construction. Made of case hardened steel in numbered pairs. Clamps within grooves permit use on sides. Set consists of two blocks and two clamps. Work capacity to approximately 2" (51 mm) diameter. Accuracy: V-grooves are central, parallel and square with all surfaces within 0.0003". V-groove is 90 degree +0.0000" -0.0003". Corresponding dimensions for each pair are alike within 0.0003". Clamping Range 2". US Made. round matched and squared with-in .0003,Grind Mark on one V-Block,See pictures AMAZON Over $560.00 Specifications for this item Brand Name Brown & Sharpe Part Number 599-750-2 Material Type Steel Number of Items 2 Overall Height 2  inches Overall Length 2-1/2  inches Overall Width 2-3/4  inches Please see my other items
“Ground matched and squared with-in .0003,Grind Mark on one V-Block,See pictures”
Manufacturer BROWN&SHARPE 750B
Workholding Part Type UNIVERSAL V-blocks & CLAMPS
Brand BROWN&SHARPE
Toolholding Part Type UNIVERSAL V-BLOCK SET
Model 750-B
BROWN&SHARPE 750B MATCHING PAIR WITH CLAMPS
Type V-BLOCK SET MATCHED PAIR
Country of Manufacture United States

Directions

Similar products from Supporting Blocks & Sets

MACHINIST LATHE MILL Starrett # 567 V Block with Clamp in Box a

MACHINIST LATHE MILL Starrett # 567 V Block with Clamp in Box a

  • Morris Plains, New Jersey, United States
  • Feb 24th
MACHINIST LATHE MILL Unusual Ground Hardened V Block Tool Makers

MACHINIST LATHE MILL Unusual Ground Hardened V Block Tool Makers

  • Morris Plains, New Jersey, United States
  • Feb 23rd
MACHINIST ANGLE PLATES-ANGLE BLOCKS, SET UP, MILLING OR INSPECTION - 2 PAIR

MACHINIST ANGLE PLATES-ANGLE BLOCKS, SET UP, MILLING OR INSPECTION - 2 PAIR

  • Roscommon, Michigan, United States
  • Feb 23rd
Machinists 2/19 USA COMPLEX Design Fixture Block #2 WOW!!!

Machinists 2/19 USA COMPLEX Design Fixture Block #2 WOW!!!

  • Lutz, Florida, United States
  • Feb 23rd
Machinists 2/19 USA # 9 USA V Groove Fixture Block #9 WOW!!!

Machinists 2/19 USA # 9 USA V Groove Fixture Block #9 WOW!!!

  • Lutz, Florida, United States
  • Feb 23rd
Machinists USA Meyer .011 to .060 pin gage set

Machinists USA Meyer .011 to .060 pin gage set

  • Lutz, Florida, United States
  • Feb 23rd
Parallel Set 1/8 thick import

Parallel Set 1/8 thick import

  • Palm Harbor, Florida, United States
  • Feb 23rd
Machinist V block

Machinist V block

  • Aurora, Ohio, United States
  • Feb 23rd
Precision Parallel Set BRAND NEW IN BOX!

Precision Parallel Set BRAND NEW IN BOX!

  • Springfield, Illinois, United States
  • Feb 23rd
Brown & Sharpe, PAIR OF 750-B V-BLOCKS W/CLAMPS

Brown & Sharpe, PAIR OF 750-B V-BLOCKS W/CLAMPS

  • Plano, Illinois, United States
  • Feb 23rd
"V" Block & Clamp Set

"V" Block & Clamp Set

  • Bellbrook, Ohio, United States
  • Feb 23rd
Machinists 2/22 USA Heavy Fixturing Pad NO NICKS

Machinists 2/22 USA Heavy Fixturing Pad NO NICKS

  • Lutz, Florida, United States
  • Feb 23rd
Machinists 2/22 Girder Block Set 3/8 x 7/8

Machinists 2/22 Girder Block Set 3/8 x 7/8

  • Lutz, Florida, United States
  • Feb 23rd
Machinists 2/22 Brown and Sharpe (??) Matched Girder Block Set 1 /1/4

Machinists 2/22 Brown and Sharpe (??) Matched Girder Block Set 1 /1/4

  • Lutz, Florida, United States
  • Feb 23rd
Machinists 2/22 B2 USA Matched Girder Bars Set #2

Machinists 2/22 B2 USA Matched Girder Bars Set #2

  • Lutz, Florida, United States
  • Feb 23rd
Machinists 2/22 B2 USA Matched Girder Bars Set #1

Machinists 2/22 B2 USA Matched Girder Bars Set #1

  • Lutz, Florida, United States
  • Feb 23rd
Precision V Block

Precision V Block

  • Bronson, Florida, United States
  • Feb 23rd
Angle Plate with V Block and Manual Clamp

Angle Plate with V Block and Manual Clamp

  • Dayton, Ohio, United States
  • Feb 23rd
V Block

V Block

  • Bronson, Florida, United States
  • Feb 23rd
1-2-3 blocks (4) set up Blocks, (2) 1-2-3 blocks (2) 1-2-3 blocks

1-2-3 blocks (4) set up Blocks, (2) 1-2-3 blocks (2) 1-2-3 blocks

  • Bronson, Florida, United States
  • Feb 23rd

People who viewed this item also vieved

NEW IN BOX LYNDEX 5C COLLET 15/16" 500-060

NEW IN BOX LYNDEX 5C COLLET 15/16" 500-060

  • Ramona, California, United States
  • Mar 10th
Machinist Vertical Gauage Stand Phase II As is See Pictures

Machinist Vertical Gauage Stand Phase II As is See Pictures

  • Erie, Pennsylvania, United States
  • Mar 10th
LOT OF ASSORTED 5C COLLETS

LOT OF ASSORTED 5C COLLETS

  • Norwalk, California, United States
  • Mar 10th
Pair of Vintage PRECISION ANGLE PLATES fixture machinist tools Step Blocks 123

Pair of Vintage PRECISION ANGLE PLATES fixture machinist tools Step Blocks 123

  • Saint Regis Falls, New York, United States
  • Mar 25th
Path SPIN-DEX

Path SPIN-DEX

  • Grants Pass, Oregon, United States
  • Mar 25th
LOT of 20 HARD PLASTIC SET UP / STEP BLOCKS milling machine work holder clamp

LOT of 20 HARD PLASTIC SET UP / STEP BLOCKS milling machine work holder clamp

  • Rushville, Indiana, United States
  • Mar 25th
VTG. WILTON 6" C-CLAMPS No.4406

VTG. WILTON 6" C-CLAMPS No.4406

  • Kewaunee, Wisconsin, United States
  • Mar 25th
VTG. JORGENSEN & ARMSTRONG 4" C-CLAMPS

VTG. JORGENSEN & ARMSTRONG 4" C-CLAMPS

  • Kewaunee, Wisconsin, United States
  • Mar 25th
VTG. J.H. WILLIAMS 4" C-CLAMPS NO. 104

VTG. J.H. WILLIAMS 4" C-CLAMPS NO. 104

  • Kewaunee, Wisconsin, United States
  • Mar 25th
Quality USA MILLING MACHINE SWIVEL VISE 6 5/8"width; 3"max opening; 2"depth (G3)

Quality USA MILLING MACHINE SWIVEL VISE 6 5/8"width; 3"max opening; 2"depth (G3)

  • White Lake, Michigan, United States
  • Mar 27th
Drill Press MILLING MACHINE 3 axis VISE 3 1/2"w 1 7/8"max open 7/8 "depth (G2)

Drill Press MILLING MACHINE 3 axis VISE 3 1/2"w 1 7/8"max open 7/8 "depth (G2)

  • White Lake, Michigan, United States
  • Mar 27th
Wilton Bench Vise 9400-series 7 in opening industrial type

Wilton Bench Vise 9400-series 7 in opening industrial type

  • Orland Park, Illinois, United States
  • Mar 27th
MACHINIST LATHE MILL 4 Jaw 12" Cushman Lathe Chuck

MACHINIST LATHE MILL 4 Jaw 12" Cushman Lathe Chuck

  • Morris Plains, New Jersey, United States
  • Mar 28th
South Bend 10L Heavy 10 Shars 6" 3 Jaw Chuck 2-1/4-8 Back Plate

South Bend 10L Heavy 10 Shars 6" 3 Jaw Chuck 2-1/4-8 Back Plate

  • West Terre Haute, Indiana, United States
  • Mar 28th
SMW WIDE SOFT TOP JAWS

SMW WIDE SOFT TOP JAWS

  • Cadiz, Kentucky, United States
  • Mar 28th
NICE READY TOOL USA EXTENDED NOSE PRECISION LIVE CENTER W/ 1-1/4" SHANK

NICE READY TOOL USA EXTENDED NOSE PRECISION LIVE CENTER W/ 1-1/4" SHANK

  • Ellington, New York, United States
  • Jun 13th
ROYAL PRODUCTS PRECISION LIVE CENTER MODEL 101102 2MT SHANK

ROYAL PRODUCTS PRECISION LIVE CENTER MODEL 101102 2MT SHANK

  • Ellington, New York, United States
  • Jun 13th
3" DIA. BULL NOSE BALL BEARING LIVE CENTER W/ 4MT SHANK

3" DIA. BULL NOSE BALL BEARING LIVE CENTER W/ 4MT SHANK

  • Ellington, New York, United States
  • Jun 13th
US Made Steel T-Slot Bolts; 1-1/2 Length; 5/8 Slot, 5/8-11 Thread 52503; Lot/5

US Made Steel T-Slot Bolts; 1-1/2 Length; 5/8 Slot, 5/8-11 Thread 52503; Lot/5

  • Dayton, Ohio, United States
  • May 29th
US Made Steel T-Slot Bolts; 6" Length; 1/2 Slot, 1/2-13 Thread 52417; Lot/5

US Made Steel T-Slot Bolts; 6" Length; 1/2 Slot, 1/2-13 Thread 52417; Lot/5

  • Dayton, Ohio, United States
  • May 29th
US Made Steel T-Slot Bolts; 5" Length; 1/2 Slot, 1/2-13 Thread 52415; Lot/5

US Made Steel T-Slot Bolts; 5" Length; 1/2 Slot, 1/2-13 Thread 52415; Lot/5

  • Dayton, Ohio, United States
  • May 29th
Troyke DL-20-B 20" Vertical Rotary Table for CNC with Stand

Troyke DL-20-B 20" Vertical Rotary Table for CNC with Stand

  • Stone Mountain, Georgia, United States
  • Jun 2nd
High Performance Machines for Monarch 9 Inch 4th Axis Indexer with Tailstock

High Performance Machines for Monarch 9 Inch 4th Axis Indexer with Tailstock

  • Johnson City, New York, United States
  • Jun 2nd
MACHINIST TOOL LATHE MILL Micro Precision Microvider Ralmikes Rotary Table 3 1/2

MACHINIST TOOL LATHE MILL Micro Precision Microvider Ralmikes Rotary Table 3 1/2

  • Morris Plains, New Jersey, United States
  • Jun 2nd
16C COLLET CHUCK W/HARDINGE 16C "E" COLLET

16C COLLET CHUCK W/HARDINGE 16C "E" COLLET

  • Highland, New York, United States
  • Jun 8th
YUASA NEWS 5C HORIZONTAL-VERTICAL COLLET INDEXER W/COLLETS 1/8-1" HARDINGE

YUASA NEWS 5C HORIZONTAL-VERTICAL COLLET INDEXER W/COLLETS 1/8-1" HARDINGE

  • Highland, New York, United States
  • Jun 8th
"Cubics Platina Fixed Circular Needles 40""-Size 2/2.75mm"

"Cubics Platina Fixed Circular Needles 40""-Size 2/2.75mm"

  • Hickory Hills, Illinois, United States
  • Jun 8th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies