+ Post new Ad
Brown & Sharpe P. T .C. Turning Center Replacement Spindle Drive NEW, US $295.00 – Picture 0
Brown & Sharpe P. T .C. Turning Center Replacement Spindle Drive NEW, US $295.00 – Picture 1
Brown & Sharpe P. T .C. Turning Center Replacement Spindle Drive NEW, US $295.00 – Picture 0
Brown & Sharpe P. T .C. Turning Center Replacement Spindle Drive NEW, US $295.00 – Picture 1

Brown & Sharpe P. T .c. Turning Center Replacement Spindle Drive New

US $295.00

  • Bloomfield Hills, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
We have a Spindle Drive Transmission for a Brown & Sharpe P.T.C. Production Turning Center Model 60 Automatic Screw Machine. This is an original replacement part in new condition, never used. It was purchased directly from Brown & Sharpe to have on hand in case of a breakdown. This on a consignment for us to sell. The new cost of this back years ago was over $12,000. USD. If you have any of these machines running it would be wise to put this on a self in case of a breakdown. They are no longer made and virtually impossible to fabricate one. Remember Brown & Sharpe's have their own decimal and threads which I have never seen anyone duplicate. It comes with a Brown & Sharpe Replacement Manual showing breakdown. The Shaft consists of reverse shaft, hydraulic actuated clutch, reverse gear clutch and low speed driving gear. It will be shipped by Federal Express. As soon as we have the buyer's zip code we can quote you a price. It will be shipped with insurance. It is 37 pounds, 7 inches wide and 14 1/4 inch long.  We are going to sell this Brown & Shape Spindle Drive Shaft for $295. USD without reserve. We will send the buyer an email with payment instructions.  If Paypal is used please add 3% (Three percent) for processing. Buyer to pay shipping cost. Should you have any questions please contact us at 248 892.5233 weekdays between 9 a.m. and 4 p.m. EST. Time is money. Payment must be made within 5 business days of award and shipment within 7 days.  Buyer to pick-up because the cost to ship would be too expensive. 
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Brown & Sharpe
MPN 50-41404 & 50-41181
Model P. T. C. 60
Country of Manufacture United States

Directions

Similar products from Screw Machines Equipment

HEAVY DUTY 3/4" CAPACITY ADJUSTABLE TOOL HOLDER 1-1/4" SHANK

HEAVY DUTY 3/4" CAPACITY ADJUSTABLE TOOL HOLDER 1-1/4" SHANK

  • Ellington, New York, United States
  • Jan 30th
BROWN & SHARPE NO. 22 BC FLOATING TAP HOLDER 1" SHANK

BROWN & SHARPE NO. 22 BC FLOATING TAP HOLDER 1" SHANK

  • Ellington, New York, United States
  • Jan 30th
SOMMA MODEL NO. 2 HEAVY DUTY TOOL HOLDER W/ ROLLER BACK REST & CUT OFF

SOMMA MODEL NO. 2 HEAVY DUTY TOOL HOLDER W/ ROLLER BACK REST & CUT OFF

  • Ellington, New York, United States
  • Jan 30th
GEOMETRIC 9/16" D DIE HEAD W/ 1-1/2" SHANK

GEOMETRIC 9/16" D DIE HEAD W/ 1-1/2" SHANK

  • Ellington, New York, United States
  • Jan 30th
1992 Citizen L-16 Type VI Swiss Type CNC Lathe w/Spego Barfeed, Live Tool

1992 Citizen L-16 Type VI Swiss Type CNC Lathe w/Spego Barfeed, Live Tool

  • Harrison, New Jersey, United States
  • Jan 30th
Brown and Sharpe No. #22 Rack Gear Cutting Attachment

Brown and Sharpe No. #22 Rack Gear Cutting Attachment

  • Queen Creek, Arizona, United States
  • Jan 30th
** Brown and Sharpe Trip Dogs #2 #3 #2G Automatic Screw Machine 10 Pc. Set **

** Brown and Sharpe Trip Dogs #2 #3 #2G Automatic Screw Machine 10 Pc. Set **

  • Lindenhurst, New York, United States
  • Jan 30th
Brown and Sharpe OO Trip Dogs (x10) with T Bolts & Nuts Right Hand and Left Hand

Brown and Sharpe OO Trip Dogs (x10) with T Bolts & Nuts Right Hand and Left Hand

  • Lindenhurst, New York, United States
  • Jan 30th
Brown and Sharpe OG Trip Dogs with T bolts and nuts (x10) Right and Left

Brown and Sharpe OG Trip Dogs with T bolts and nuts (x10) Right and Left

  • Lindenhurst, New York, United States
  • Jan 30th
NCG1046 BROWNING CHANGE GEAR 46 TOOTH 4.8 OD

NCG1046 BROWNING CHANGE GEAR 46 TOOTH 4.8 OD

  • Godfrey, Illinois, United States
  • Jan 30th
DAVENPORT RECTANGULAR CUTOFF TOOL HOLDERS [ 2-PCS ]

DAVENPORT RECTANGULAR CUTOFF TOOL HOLDERS [ 2-PCS ]

  • Churchville, New York, United States
  • Jan 30th
Hardinge Acme 1-5/8" Gridley Collet 1-3/8" Hex # 40510029013750

Hardinge Acme 1-5/8" Gridley Collet 1-3/8" Hex # 40510029013750

  • West Warwick, Rhode Island, United States
  • Jan 30th
Boyar-Schultz Turret Tool Adaptor Part L-5/8-To-3/4

Boyar-Schultz Turret Tool Adaptor Part L-5/8-To-3/4

  • West Warwick, Rhode Island, United States
  • Jan 30th
Brown & Sharpe No.22D Turret Lathe Tool Holder 1" Shank 1/4" X 11/16" Tool Slot

Brown & Sharpe No.22D Turret Lathe Tool Holder 1" Shank 1/4" X 11/16" Tool Slot

  • West Warwick, Rhode Island, United States
  • Jan 30th
Fette Roll Chasers 3/8-24 UNF

Fette Roll Chasers 3/8-24 UNF

  • West Warwick, Rhode Island, United States
  • Jan 30th
Hardinge Acme 2-5/8" Gridley Collet 1-7/8" Serrated # 40590059019

Hardinge Acme 2-5/8" Gridley Collet 1-7/8" Serrated # 40590059019

  • West Warwick, Rhode Island, United States
  • Jan 30th
Threading Chasers Geometric 3/4" D MILLED 5/16"-18NC

Threading Chasers Geometric 3/4" D MILLED 5/16"-18NC

  • Belleville, New Jersey, United States
  • Jan 30th
RSVP Block Recess Cutter (4 pcs.)ASD60489 3/8" DRKY EDP #2204 and cutters.

RSVP Block Recess Cutter (4 pcs.)ASD60489 3/8" DRKY EDP #2204 and cutters.

  • Troy, Ohio, United States
  • Jan 30th
4B13-2, REED Thread Rolls, 1-9/16-18 UNEF. 6 SPLINE,1 set of 3 pcs.

4B13-2, REED Thread Rolls, 1-9/16-18 UNEF. 6 SPLINE,1 set of 3 pcs.

  • Troy, Ohio, United States
  • Jan 30th
7/8 inch Torque Wrench Heads

7/8 inch Torque Wrench Heads

  • Burlington, Iowa, United States
  • Jan 30th

People who viewed this item also vieved

MITSUBISHI UPPER wire feed DC MOTOR S601D899P01 16CL-2501G 24.50.502 WM424 NEW!

MITSUBISHI UPPER wire feed DC MOTOR S601D899P01 16CL-2501G 24.50.502 WM424 NEW!

  • Broadview Heights, Ohio, United States
  • Jun 3rd
System 3R Mini Set for Sinker EDM

System 3R Mini Set for Sinker EDM

  • McHenry, Illinois, United States
  • Jun 3rd
POWERFUL MAGNET FOR WIRE EDM SLUGS holds up to 6 lbs. ETC0921 NEW!

POWERFUL MAGNET FOR WIRE EDM SLUGS holds up to 6 lbs. ETC0921 NEW!

  • Broadview Heights, Ohio, United States
  • Jun 3rd
TUNGALOY STCR12-27 TETRACUT TOOL HOLDER 3/4" SHANK WITH 4 BOXES OF INSERTS

TUNGALOY STCR12-27 TETRACUT TOOL HOLDER 3/4" SHANK WITH 4 BOXES OF INSERTS

  • Meridian, Idaho, United States
  • Jun 4th
Armstrong Ace 2010 S Lathe Tool Holder 3/8" x 3/4" Shank Handle 1/4" Bit Holder

Armstrong Ace 2010 S Lathe Tool Holder 3/8" x 3/4" Shank Handle 1/4" Bit Holder

  • Youngstown, Ohio, United States
  • Jun 4th
Armstrong 1-L Lathe Tool Holder 3/8" by 3/4" Shank 5/16" Bits

Armstrong 1-L Lathe Tool Holder 3/8" by 3/4" Shank 5/16" Bits

  • Youngstown, Ohio, United States
  • Jun 4th
KEARNEY TRECKER 3" Shell Face Milling Cutter-50 NMTB Taper-With Carbide Inserts

KEARNEY TRECKER 3" Shell Face Milling Cutter-50 NMTB Taper-With Carbide Inserts

  • Joplin, Missouri, United States
  • Jun 4th
Devlieg Microbore Tenth Set Boring Head #2 Cartridges, Cutting Bits and Parts

Devlieg Microbore Tenth Set Boring Head #2 Cartridges, Cutting Bits and Parts

  • Salinas, California, United States
  • Jun 4th
Carboloy 4" Shell Face Milling Cutter-50 NMTB Taper-Indexable Carbide Inserts

Carboloy 4" Shell Face Milling Cutter-50 NMTB Taper-Indexable Carbide Inserts

  • Joplin, Missouri, United States
  • Jun 4th
SOCIETE GENEVOIS SIP , instrument

SOCIETE GENEVOIS SIP , instrument

  • Oakville, ON, Canada
  • Jun 5th
one Renishaw OMP 60 probe.broken For parts or not working

one Renishaw OMP 60 probe.broken For parts or not working

  • Welcome, China
  • Jun 5th
one Renishaw OMP40 probe .For parts or not working.not tested

one Renishaw OMP40 probe .For parts or not working.not tested

  • Welcome, China
  • Jun 5th
Ingersoll 1.5" Drill 1" Shank 12J1E 1502281R01 (LOC1363D)

Ingersoll 1.5" Drill 1" Shank 12J1E 1502281R01 (LOC1363D)

  • Laingsburg, Michigan, United States
  • Jun 7th
Ingersoll 13mm Drill 14mm Shank w/ Qty2 Inserts YD1300039S0R02 (LOC1363D)

Ingersoll 13mm Drill 14mm Shank w/ Qty2 Inserts YD1300039S0R02 (LOC1363D)

  • Laingsburg, Michigan, United States
  • Jun 7th
Kennametal 14mm Indexable Drill 16mm Shank KTIP140R3SS16M (LOC1363B)

Kennametal 14mm Indexable Drill 16mm Shank KTIP140R3SS16M (LOC1363B)

  • Laingsburg, Michigan, United States
  • Jun 7th
black diamond drill grinder, 35 collets

black diamond drill grinder, 35 collets

  • Greenfield, Indiana, United States
  • Jun 7th
BLANCHARD No. 11 ROTARY GRINDER

BLANCHARD No. 11 ROTARY GRINDER

  • Libertyville, Illinois, United States
  • Jun 7th
Devlieg Micro Point Tool Grinderr, S/N 6-300

Devlieg Micro Point Tool Grinderr, S/N 6-300

  • Somerville, New Jersey, United States
  • Jun 7th
Delta table saw insert

Delta table saw insert

  • Newport, Rhode Island, United States
  • Jun 8th
HAAS ST-30 OD LIVE HOLDER - BENZ (SN 3-15573)

HAAS ST-30 OD LIVE HOLDER - BENZ (SN 3-15573)

  • Waxhaw, North Carolina, United States
  • Jun 8th
250 Ton x 14' Standard Industrial AB250-14 Hydraulic Press Brake

250 Ton x 14' Standard Industrial AB250-14 Hydraulic Press Brake

  • Kansas City, Missouri, United States
  • Jun 8th
NEW 150 TON PRESSMASTER GSP-150T-6/8 GANTRY STYLE HYDRAULIC STRAIGHTENING PRESS

NEW 150 TON PRESSMASTER GSP-150T-6/8 GANTRY STYLE HYDRAULIC STRAIGHTENING PRESS

  • Harrison, New Jersey, United States
  • Jun 8th
XGP 40 Centrifugal Barrel Finishing Machine (Tumbler) w/ Extra Barrels

XGP 40 Centrifugal Barrel Finishing Machine (Tumbler) w/ Extra Barrels

  • Flossmoor, Illinois, United States
  • Jun 9th
Lapmaster CP-2 Monochromatic Light Source 6" Optical Lap Flatness

Lapmaster CP-2 Monochromatic Light Source 6" Optical Lap Flatness

  • Machesney Park, Illinois, United States
  • Jun 9th
SUNNEN HONE MAN-310 BELT STK 5064

SUNNEN HONE MAN-310 BELT STK 5064

  • Wadley, Alabama, United States
  • Jun 9th
DoAll Vertical Band Saw Model 1612-0 with Dayton Blade Welder and Blade Griinder

DoAll Vertical Band Saw Model 1612-0 with Dayton Blade Welder and Blade Griinder

  • Claremont, California, United States
  • Jun 9th
Kadant Johnson guide set s27510

Kadant Johnson guide set s27510

  • Clifton Heights, Pennsylvania, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies