+ Post new Ad
Bubinga Smoked Figured wood veneer 9" x 19" raw no backing 1/42" thickness "A", US $720 – Picture 0
Bubinga Smoked Figured wood veneer 9" x 19" raw no backing 1/42" thickness "A", US $720 – Picture 0

Bubinga Smoked Figured Wood Veneer 9" X 19" Raw No Backing 1/42" Thickness "a"

US $720

  • Louisville, Kentucky, United States
  • Jun 20th
Open on mobile:
QR code
Bubinga Smoked Figured wood veneer sheet 9" x 19" raw no backing. 1/42" thickness. "A" grade quality. All pieces in sequence and matching.  As pictured. Trust the experience, knowledge, and reputation that we have earned since 1995 Visit My eBay Store: JSO Wood Products Other sizes and backers may be available. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40”   Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly.   Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist (backed products only). Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.    

Directions

Similar products from Industrial Wood & Interline

Wood Veneer Qtr Eucalyptus 48x98 On 11/16 NAUFMDF Board 25 Pieces Crate # 46

Wood Veneer Qtr Eucalyptus 48x98 On 11/16 NAUFMDF Board 25 Pieces Crate # 46

  • Jeffersonville, Indiana, United States
  • Jun 20th
Wood Veneer Hickory 13x25 20Pcs Total Raw Veneer "EXOTIC" HI6 3-17-16

Wood Veneer Hickory 13x25 20Pcs Total Raw Veneer "EXOTIC" HI6 3-17-16

  • Jeffersonville, Indiana, United States
  • Jun 20th
Wood Veneer F/C Khaya SIZES LISTED On 11/16 MDF Board 9 Pieces Crate # 39

Wood Veneer F/C Khaya SIZES LISTED On 11/16 MDF Board 9 Pieces Crate # 39

  • Jeffersonville, Indiana, United States
  • Jun 20th
Wood Veneer Rosewood 24x90 1 Piece 10Mil Paper Backed "EXOTIC" 0855 1

Wood Veneer Rosewood 24x90 1 Piece 10Mil Paper Backed "EXOTIC" 0855 1

  • Jeffersonville, Indiana, United States
  • Jun 20th
Wood Veneer Smoked Sapele 48x98 1 Piece 10Mil paper Backed "EXOTIC" CAL 43

Wood Veneer Smoked Sapele 48x98 1 Piece 10Mil paper Backed "EXOTIC" CAL 43

  • Jeffersonville, Indiana, United States
  • Jun 20th
Wood Veneer Maple 48x120 1pc total 10Mil Paper Backed "EXOTIC" Stock Skid 1

Wood Veneer Maple 48x120 1pc total 10Mil Paper Backed "EXOTIC" Stock Skid 1

  • Jeffersonville, Indiana, United States
  • Jun 20th
Wood Veneer Tiger Wood 9x108 3pcs total Raw Veneer "EXOTIC" MEX 15

Wood Veneer Tiger Wood 9x108 3pcs total Raw Veneer "EXOTIC" MEX 15

  • Jeffersonville, Indiana, United States
  • Jun 20th
Wood Walnut Veneer 103X13 total 3 pcs RAW VENEER N427.

Wood Walnut Veneer 103X13 total 3 pcs RAW VENEER N427.

  • Clarksville, Indiana, United States
  • Jun 20th
Wood Walnut Veneer 108X12 total 2 pcs RAW VENEER N428. nutts

Wood Walnut Veneer 108X12 total 2 pcs RAW VENEER N428. nutts

  • Clarksville, Indiana, United States
  • Jun 20th
Corian Sandstone 30x144 Slab

Corian Sandstone 30x144 Slab

  • High Point, North Carolina, United States
  • Jun 20th
Bubinga Smoked Figured wood veneer 8" x 9" raw no backing 1/42" thickness "A"

Bubinga Smoked Figured wood veneer 8" x 9" raw no backing 1/42" thickness "A"

  • Louisville, Kentucky, United States
  • Jun 20th
Bubinga Smoked Figured wood veneer 9" x 16" raw no backing 1/42" thickness "A"

Bubinga Smoked Figured wood veneer 9" x 16" raw no backing 1/42" thickness "A"

  • Louisville, Kentucky, United States
  • Jun 20th
Ultra Curly Pomele Curl hawaiian Koa Slab 45"x3x2" For Furniture Making

Ultra Curly Pomele Curl hawaiian Koa Slab 45"x3x2" For Furniture Making

  • Kailua Kona, Hawaii, United States
  • Jun 20th
Premium Curly hawaiian Koa 6 Boards 24"x4-5"x1" For Fine Woodworking

Premium Curly hawaiian Koa 6 Boards 24"x4-5"x1" For Fine Woodworking

  • Kailua Kona, Hawaii, United States
  • Jun 20th
Hawaiian Silk Oak Reclaimed Boards 2@24"x12x1 For Fine Woodworking

Hawaiian Silk Oak Reclaimed Boards 2@24"x12x1 For Fine Woodworking

  • Kailua Kona, Hawaii, United States
  • Jun 20th
Hawaiian Grown Bermuda Cedar Live Edge Amazingly Aromatic 4@16-24"x1-6x1"

Hawaiian Grown Bermuda Cedar Live Edge Amazingly Aromatic 4@16-24"x1-6x1"

  • Kailua Kona, Hawaii, United States
  • Jun 20th
Hawaiian Kau Wood Live Edge Endemic Rare Coastal Native 3 Boards 24"x5-11x1"

Hawaiian Kau Wood Live Edge Endemic Rare Coastal Native 3 Boards 24"x5-11x1"

  • Kailua Kona, Hawaii, United States
  • Jun 20th
Bermuda Cedar From Hawaii Live Edge Reclaimed 2 Boards 24"x5/8-7x1"

Bermuda Cedar From Hawaii Live Edge Reclaimed 2 Boards 24"x5/8-7x1"

  • Kailua Kona, Hawaii, United States
  • Jun 20th
Curly Koa From Hawaii Spalted Ambrosia Live Edge 2 Boards 21-23"x4-5x2"

Curly Koa From Hawaii Spalted Ambrosia Live Edge 2 Boards 21-23"x4-5x2"

  • Kailua Kona, Hawaii, United States
  • Jun 20th
Curly Hawaiian Sugi Japanese Incense Cedar 6 Boards 13-24"x0-7"x1"

Curly Hawaiian Sugi Japanese Incense Cedar 6 Boards 13-24"x0-7"x1"

  • Kailua Kona, Hawaii, United States
  • Jun 20th

People who viewed this item also vieved

Lamello Top Biscuit Joiner

Lamello Top Biscuit Joiner

  • Seattle, Washington, United States
  • Jan 30th
Lot 2501 Back Band Weinig / WKW Corrugated Knives Shaper Moulder

Lot 2501 Back Band Weinig / WKW Corrugated Knives Shaper Moulder

  • College Station, Texas, United States
  • Jan 30th
New in Packsge! Edge Dry Cutting Diamond Saw Blade, Free Jigsaw Blade!

New in Packsge! Edge Dry Cutting Diamond Saw Blade, Free Jigsaw Blade!

  • Rome, New York, United States
  • Jan 30th
10 PCB end mill engraving cnc router tool bits 1/8" (3.175mm)-1.2mm L:38mm (B)

10 PCB end mill engraving cnc router tool bits 1/8" (3.175mm)-1.2mm L:38mm (B)

  • shenzhen, China
  • Jan 30th
10pcs new 4/3mm coating four flute metal cutting tool bits (a)

10pcs new 4/3mm coating four flute metal cutting tool bits (a)

  • shenzhen, China
  • Jan 30th
10pcs new 2*8mm carbide half straight CNC router cutting bit ?3.175mm (a)

10pcs new 2*8mm carbide half straight CNC router cutting bit ?3.175mm (a)

  • shenzhen, China
  • Jan 30th
Lot of 2- Clamps- For Drill Press and Others- 0 to 2 3/8"- Quick Release.

Lot of 2- Clamps- For Drill Press and Others- 0 to 2 3/8"- Quick Release.

  • Cape Coral, Florida, United States
  • Jan 30th
J.H. WILLIAMS & Co. No. 403 Body Builder Clamp, winged, 6.25" long overall

J.H. WILLIAMS & Co. No. 403 Body Builder Clamp, winged, 6.25" long overall

  • Lapeer, Michigan, United States
  • Jan 30th
JUDD 2" C- Clamp, about 4" long overall, turns nicely, adapted for special use?

JUDD 2" C- Clamp, about 4" long overall, turns nicely, adapted for special use?

  • Lapeer, Michigan, United States
  • Jan 30th
One Lot Of Drill Bits 9291-8

One Lot Of Drill Bits 9291-8

  • Hillsdale, New Jersey, United States
  • Jan 30th
Vintage 7-pc FORSTNER TITANIUM BITS

Vintage 7-pc FORSTNER TITANIUM BITS

  • Florence, Oregon, United States
  • Jan 30th
APPLIED KWIK CUT C/T HOLE SAW 3/4" ATTACHMENT #121940

APPLIED KWIK CUT C/T HOLE SAW 3/4" ATTACHMENT #121940

  • Highland Park, Michigan, United States
  • Jan 30th
Woodworking Tools, Materials, Processes by William P. Spence and L. Griffiths

Woodworking Tools, Materials, Processes by William P. Spence and L. Griffiths

  • Barberton, Ohio, United States
  • Jan 30th
Delta Rockwell 9 Inch Builders Table Saw Manual

Delta Rockwell 9 Inch Builders Table Saw Manual

  • South Lyme, Connecticut, United States
  • Jan 30th
Unimat 3 / 4 Lathe, Permanent Magnet AC Replacement Motor

Unimat 3 / 4 Lathe, Permanent Magnet AC Replacement Motor

  • Sykesville, Maryland, United States
  • Jan 30th
Custom Rosette Shaper Router Moulder Cutter Machine CNC Jig Molding Trim Frame

Custom Rosette Shaper Router Moulder Cutter Machine CNC Jig Molding Trim Frame

  • Mineral Ridge, Ohio, United States
  • Jan 30th
Olympic Premium Wood Grain Pattern Graining Tool Gel Stain 41699

Olympic Premium Wood Grain Pattern Graining Tool Gel Stain 41699

  • Roy, Utah, United States
  • Jan 30th
Craftsman 9-2563 C Door Butt Hinge Template in Box.

Craftsman 9-2563 C Door Butt Hinge Template in Box.

  • Dunnellon, Florida, United States
  • Jan 30th
**NEW** TRUACUT ROUTER BIT - 4MM ROMAN OGEE BIT - STANLEY **FREEPOST**

**NEW** TRUACUT ROUTER BIT - 4MM ROMAN OGEE BIT - STANLEY **FREEPOST**

  • Hoppers Crossing, VIC, Australia
  • Jan 30th
1/4" CORE BOX, ROUND NOSE, FLUTING ROUTER BIT 1/4" SHANK C3 CARBIDE TIP. NEW!

1/4" CORE BOX, ROUND NOSE, FLUTING ROUTER BIT 1/4" SHANK C3 CARBIDE TIP. NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
5X 1/8" Carbide CNC Router Bits Single Flute Tools 22mm

5X 1/8" Carbide CNC Router Bits Single Flute Tools 22mm

  • China, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies