+ Post new Ad
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 0
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 1
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 2
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 3
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 0
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 1
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 2
BUFFALO Mdl# 1 HORIZONTAL BENDING ROLLS, US $18,500.00 – Picture 3

Buffalo Mdl# 1 Horizontal Bending Rolls

US $18,500.00

  • Mansfield, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
  BUFFALO HORIZONTAL BENDING ROLLS MODEL# 1 STOCK #: 112149   SPECIFICATIONS MANUAL HEIGHT ADJUSTMENT OF UPPER ROLL  MANUAL VERTICAL & LATERAL ADJUSTMENT OF GUIDE ROLLS  FOUR SET OF ANGLE ROLLS  MISCELANEOUS SPACE PLATES  FOUR SET OD RADIOUS ROLLS  10 HP MOTOR, WIRED 3 PHASE, 60 CYCLE, 220 VOLTS  FORWARD & REVERSING, CARI SPEED CONTROLLED BY DRUM SWITCH    ROLLING CAPACITY:  3" X 3" X 3/8" ANGLES: LEG OUT, MINIMUM DIAMETER 24"  3-1/2" X 3-1/2" X 5/16" ANGLES: LEG OUT, MINIMUM DIAMETER 36"  2-1/2" X 2-1/2" X 3/8" ANGLES: LEG IN, MINIMUM DIAMETER 30"  3" X 3" X 5/16" ANGLES: LEG IN, MINIMUM DIAMETERS 36"  SMALLEST ANGLE, LEG OUT: 1-1/2" X 1-1/2" X 3/16" MINIMUM DIMATER 13"  SMALLEST ANGLE, LEG IN: 1-1/2" X 1-1/2" X 3/16" MINIMUM DIAMETER 14"  FLATS ON EDGE: 3" X 5/8", MINIMUM DIAMETER 36"  FLATS ON FLAT: 6" X 1", MINIMUM DIAMETER 24"  ROUND BAR: 2" MINIMUM DIAMTER 24"  SQUARE BAR: 1-3/4", MINIMUM DIAMETER 24"     LOCATION: MANSFIELD, OH ANY QUESTIONS? EMAIL US AT SALES@NATIONALMACHY.COM OR CALL US TOLL FREE AT 1-800-631-4470 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 158 Paris Street, Newark, New Jersey 07105-3829  |  Toll Free: (800) 631-4470  |  Phone: (973) 344-6100  |  Fax: (973) 589-0944  |  Email: sales@nationalmachy.com
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture United States
Model 1
Brand Buffalo
MPN N/A

Directions

Similar products from Tools for Fabrication Equipment

33.5" VINTAGE VIKING SHEAR CO. CAST IRON BENCH SHEARS

33.5" VINTAGE VIKING SHEAR CO. CAST IRON BENCH SHEARS

  • Rancho Santa Margarita, California, United States
  • Jan 30th
WA Whitney 600- 637 manual duplicator repair parts lot 633-040 630-038 630-039

WA Whitney 600- 637 manual duplicator repair parts lot 633-040 630-038 630-039

  • Watertown, Wisconsin, United States
  • Jan 30th
DIAMOND MODEL 1072 6 FOOT 10 GAUGE MECHANICAL POWER SHEAR WITH BACK GAUGE

DIAMOND MODEL 1072 6 FOOT 10 GAUGE MECHANICAL POWER SHEAR WITH BACK GAUGE

  • Huntington Beach, California, United States
  • Jan 30th
CURV-O-MARK Contour Marker Centering Head - Pipe Or Round Stock

CURV-O-MARK Contour Marker Centering Head - Pipe Or Round Stock

  • Old Hickory, Tennessee, United States
  • Jan 30th
Hardy and Hatchet Stake Anvil Blacksmithing/ Blacksmith

Hardy and Hatchet Stake Anvil Blacksmithing/ Blacksmith

  • West Barnstable, Massachusetts, United States
  • Jan 30th
Omax Dual heads Water-Jet System Cutter 55100

Omax Dual heads Water-Jet System Cutter 55100

  • Azusa, California, United States
  • Jan 30th
ITW Ransburg Electrostatic AER0038

ITW Ransburg Electrostatic AER0038

  • Grand Rapids, Michigan, United States
  • Jan 30th
ITW Ransburg Electrostatic Bell 30mm bell cups

ITW Ransburg Electrostatic Bell 30mm bell cups

  • Grand Rapids, Michigan, United States
  • Jan 30th
ITW Ransburg Aerobell 33 manifold block & components

ITW Ransburg Aerobell 33 manifold block & components

  • Grand Rapids, Michigan, United States
  • Jan 30th
TAYLOR WINFIELD 200 KVA SEAM WELDER W/ LATE ENTRON EM 1000 CONTROLS

TAYLOR WINFIELD 200 KVA SEAM WELDER W/ LATE ENTRON EM 1000 CONTROLS

  • Huntington Beach, California, United States
  • Jan 30th
Geka HYD110 120 ton Dual Cylinder Hydraulic Ironworker

Geka HYD110 120 ton Dual Cylinder Hydraulic Ironworker

  • Milwaukee, Wisconsin, United States
  • Jan 30th
SeS Metal Working 5000 PSI C-Frame Hydraulic Press Punch?

SeS Metal Working 5000 PSI C-Frame Hydraulic Press Punch?

  • Fleetwood, Pennsylvania, United States
  • Jan 30th
Enerpac 50 Ton Hydraulic H Frame Press 115V Electric Pump Hydra Lift Adjustable

Enerpac 50 Ton Hydraulic H Frame Press 115V Electric Pump Hydra Lift Adjustable

  • Findlay, Ohio, United States
  • Jan 30th
Carell 307 HV/CPHV-100 Angle roll, Pipe roll, Pyramid roll, Pipe bender

Carell 307 HV/CPHV-100 Angle roll, Pipe roll, Pyramid roll, Pipe bender

  • Justin, Texas, United States
  • Jan 30th
Watkiss Auto Trimmer Paper Shear WA/ATR/1254 w/ 15" Blade

Watkiss Auto Trimmer Paper Shear WA/ATR/1254 w/ 15" Blade

  • Fleetwood, Pennsylvania, United States
  • Jan 30th
Two hole pins Custom Smiley Face. 2 hole flange pins 1/2" to 1-5/8" Knurled

Two hole pins Custom Smiley Face. 2 hole flange pins 1/2" to 1-5/8" Knurled

  • Sulphur Springs, Arkansas, United States
  • Jan 30th
Two hole pins. Standard. Custom. USA Iron Workers Riggers 1/2" to 1-5/8" knurled

Two hole pins. Standard. Custom. USA Iron Workers Riggers 1/2" to 1-5/8" knurled

  • Sulphur Springs, Arkansas, United States
  • Jan 30th
Two hole pins. Standard. Custom Rebel flag. By Jermamma. 1/2" to 1-5/8" Knurled.

Two hole pins. Standard. Custom Rebel flag. By Jermamma. 1/2" to 1-5/8" Knurled.

  • Sulphur Springs, Arkansas, United States
  • Jan 30th
JAM 5-Ton Precision Press GPN505S w/ Die Attached

JAM 5-Ton Precision Press GPN505S w/ Die Attached

  • Canoga Park, California, United States
  • Jan 30th
Strippit Super 750 SG/40 44 Ton CNC Semi-Automatic Single End Punch

Strippit Super 750 SG/40 44 Ton CNC Semi-Automatic Single End Punch

  • Stone Mountain, Georgia, United States
  • Jan 30th

People who viewed this item also vieved

WIDIA Blade WR2\4502699661K0

WIDIA Blade WR2\4502699661K0

  • Ancona, Italy
  • Jan 30th
ISCAR BORING BAR 4pcs ( 20 pcs inserts )

ISCAR BORING BAR 4pcs ( 20 pcs inserts )

  • Ancona, Italy
  • Jan 30th
Cincinnati lathe

Cincinnati lathe

  • Shawano, Wisconsin, United States
  • Jan 30th
SECO R217.43-02.00-3-05A MILLING CUTTER NEW

SECO R217.43-02.00-3-05A MILLING CUTTER NEW

  • Saginaw, Michigan, United States
  • Jan 30th
Brown & Sharpe 000 Plain Mill Knock Out Bar Original

Brown & Sharpe 000 Plain Mill Knock Out Bar Original

  • Sussex, New Jersey, United States
  • Jan 30th
HRT 310 Haas Rotary Table

HRT 310 Haas Rotary Table

  • Tulsa, Oklahoma, United States
  • Jan 30th
GRINDING WHEEL HUB/ADAPTOR, TO 3/4" WHEELS, 3" TPF,

GRINDING WHEEL HUB/ADAPTOR, TO 3/4" WHEELS, 3" TPF,

  • Overland Park, Kansas, United States
  • Feb 25th
GRINDING WHEEL HUB/ADAPTOR, TO 1/2" WHEELS, 3" TPF,

GRINDING WHEEL HUB/ADAPTOR, TO 1/2" WHEELS, 3" TPF,

  • Overland Park, Kansas, United States
  • Feb 25th
Surface Grinder DoALL 8-24 D8

Surface Grinder DoALL 8-24 D8

  • Torrance, California, United States
  • Feb 25th
Bohn-Combi ~ Strapmaster ~ Whitney ~ Shaw Aero Development

Bohn-Combi ~ Strapmaster ~ Whitney ~ Shaw Aero Development

  • Bethlehem, Connecticut, United States
  • Feb 26th
Holdridge Lathe Radii Cutter Large Model 8D 8-D 8 D

Holdridge Lathe Radii Cutter Large Model 8D 8-D 8 D

  • Downey, California, United States
  • Feb 26th
Bar Feeder

Bar Feeder

  • Saint Charles, Missouri, United States
  • Feb 26th
Dayton Cross Slide Drill Press Heavy Duty Dual Axis Vice 8" Jaw Width

Dayton Cross Slide Drill Press Heavy Duty Dual Axis Vice 8" Jaw Width

  • East Haven, Connecticut, United States
  • Feb 27th
BLACK DIAMOND MODEL BW-85 1/16"-3/4" CAPACITY DRILL GRINDER 115V SINGLE PHASE

BLACK DIAMOND MODEL BW-85 1/16"-3/4" CAPACITY DRILL GRINDER 115V SINGLE PHASE

  • Ellington, New York, United States
  • Feb 27th
Starrett Tapping Wrench Handle Model 91-C

Starrett Tapping Wrench Handle Model 91-C

  • Waynesville, Ohio, United States
  • Feb 27th
SUNNEN CYLINDER HONE AN & KIT REFURBISHED RANGE 2 1/2" to 5"

SUNNEN CYLINDER HONE AN & KIT REFURBISHED RANGE 2 1/2" to 5"

  • Las Vegas, Nevada, United States
  • Mar 2nd
GROBET-VALLORBE ( CUT: 0 ) "SWISS" NEEDLE FILE ( STYLE: SLITTING ) 4" LG.

GROBET-VALLORBE ( CUT: 0 ) "SWISS" NEEDLE FILE ( STYLE: SLITTING ) 4" LG.

  • East China, Michigan, United States
  • Mar 3rd
GROBET-VALLORBE ( CUT: 0 ) SWISS NEEDLE FILE ( STYLE: ROUND EDGE JOINT ) 4" LG.

GROBET-VALLORBE ( CUT: 0 ) SWISS NEEDLE FILE ( STYLE: ROUND EDGE JOINT ) 4" LG.

  • East China, Michigan, United States
  • Mar 3rd
HARDINGE B10 ROUND NYLON PADS 5/16" 03091526

HARDINGE B10 ROUND NYLON PADS 5/16" 03091526

  • Fox Lake, Illinois, United States
  • Mar 9th
HARDINGE B4 ROUND STEEL PADS 3/16" 03091525

HARDINGE B4 ROUND STEEL PADS 3/16" 03091525

  • Fox Lake, Illinois, United States
  • Mar 9th
HARDINGE 7/16" #11 ROUND COLLET 03091524

HARDINGE 7/16" #11 ROUND COLLET 03091524

  • Fox Lake, Illinois, United States
  • Mar 9th
Erowa ITS System ER-009214 w/ Holder FH9

Erowa ITS System ER-009214 w/ Holder FH9

  • Bloomfield, Connecticut, United States
  • May 8th
Erowa ITS System ER-009214 w/ Holder FH3

Erowa ITS System ER-009214 w/ Holder FH3

  • Bloomfield, Connecticut, United States
  • May 9th
XERMAC RAM EDM X-30 120 AMP POWER SUPPLY PROGRAMMABLE Z AXIS 3 AXIS READOUT ERM

XERMAC RAM EDM X-30 120 AMP POWER SUPPLY PROGRAMMABLE Z AXIS 3 AXIS READOUT ERM

  • Harrison Township, Michigan, United States
  • May 10th
Jet J-CK350-2K/414203K Manual Cold Saw Non-Ferrous

Jet J-CK350-2K/414203K Manual Cold Saw Non-Ferrous

  • Statesville, North Carolina, United States
  • Jun 2nd
Vectrax - 450 - Vertical Bandsaw w/ Welder, 18" variable speed 3 phase 220 volt

Vectrax - 450 - Vertical Bandsaw w/ Welder, 18" variable speed 3 phase 220 volt

  • Grand Rapids, Michigan, United States
  • Jun 3rd
Grob Vertical Bandsaw NS18

Grob Vertical Bandsaw NS18

  • San Fernando, California, United States
  • Jun 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies