Bw Gaxt-d-dl Gasalert Extreme Single Gas Detector,

US $890

Louisville, Kentucky, United States
Nov 4th

Open on mobile:
QR code

BW GAXT-D-DL GasAlert Extreme Single Gas Detector, Nitrogen Dioxide (NO2), 0 to 100ppm Model: GAXT-D-DL For users who need a permanent use monitor with a real-time PPM display in a monitor that's lightweight, compact and easy-to-use form. Features include datalogging, wide range of tamperproof user options and multi-language display. Yellow Housing Need a Quote? Add to Cart BW GasAlert Extreme Single Gas Detectors Series Offers The bright, large LCD shows real-time gas concentrations and the instrument's status at all times. The full function self-test verifies sensor, circuitry and battery integrity and activates the audible/visual alarms each time you turn the instrument on. The detector clearly advises the gas hazard present-Low, High, TWA and STEL gas alarm. Recorded TWA, STEL and Peak exposures can be displayed on demand. Designed with the most advanced RFI protection available today. Its IP 66/67 rating means its waterproof to 3ft (fully submerged) and the GasAlert Extreme also features a shock resistance concussion-proof boot. Delivered ready for use, simply clip the instrument to your pocket, belt or hard hat for unequalled protection. Features Waterproof IP 66/67 rating up to 3 ft fully submerged Integral concussion-proof boot Continuous LCD shows real-time gas concentration with backlight in low light (auto); in alarm (auto) and on demand Small size (1.1 x 2.0 x 3.75 in. / 28 x 50 x 95 mm) and lightweight (2.9 oz. / 83 g) Provides 85 dB tone and bright LED indication on alarm (typical) 3-year battery life (9,000 hours) Available with internal vibrating alarm Equipped with plug-in, replaceable sensor Simple auto-zero and calibration procedure Peak value displayed on command (in ppm or %) LOW, HIGH, TWA and STEL alarms with adjustable setpoints TWA (time weighted average) values are recorded and displayed to evaluate the cumulative exposure danger and to aid regulatory compliance Classified intrinsically safe by UL to U.S. and Canadian standards; Cenelec certified; certified in Australia Full function self-test of: sensor, battery, circuitry integrity and audible/visual alarms Pocket/belt clip, test cap and hose, battery, and instructions in local languages included Supported Gases H2S - hydrogen sulfide NO - nitric oxide CO - carbon monoxide HCN - hydrogen cyanide O2 - oxygen Cl2 - chlorine SO2 - sulfur dioxide ClO2 - chlorine dioxide PH3 - phosphine O3 - ozone NH3 - ammonia ETO - ethylene oxide NO2 - nitrogen dioxide How to Replace the Battery With detector OFF, use No. 1 Phillips screwdriver to remove 4 screws from back enclosure (B) Lift back enclosure (B) straight up Lift battery (C) straight up Insert new battery (C) Replace back enclosure (B) Replace 4 screws in back enclosure (B) and hand-tighten until firm How to Replace the Sensor With detector OFF, use No. 1 Phillips screwdriver to remove 4 screws from back enclosure (B) Lift back enclosure (B) straight up Use No. 1 Phillips screwdriver to remove 2 screws from the back of the PCB (D) Lift PCB (D) together with battery (C) and sensor (E) straight up Remove sensor (E) from PCB (D) by pulling straight up Insert new sensor (E) into PCB (D) Replace PCB (D) and 2 screws and hand-tighten until firm Replace back enclosure (B) Replace 4 screws in back enclosure (B) and hand-tighten until firm How to Replace the Sensor Screen With detector OFF, use No. 1 Phillips screwdriver to remove 4 screws from back enclosure (B) Lift back enclosure (B) straight up Use No. 1 Phillips screwdriver to remove 2 screws from the back of the PCB (D) Lift PCB (D) together with battery (C) and sensor (E) straight up Remove sensor screen (F) from front enclosure (G) by pulling straight up Insert new sensor screen (F) into front enclosure (G) Replace board (C) and 2 screws and hand-tighten until firm Replace back enclosure (B) Replace 4 screws in back enclosure (B) and hand-tighten until firm