+ Post new Ad
#C-7652NC COSEN 21" x 30" Horizontal Band Saw w/ Shuttle Feed (New 2000), US $32,500.00 – Picture 0
#C-7652NC COSEN 21" x 30" Horizontal Band Saw w/ Shuttle Feed (New 2000), US $32,500.00 – Picture 0

#c-7652nc Cosen 21" X 30" Horizontal Band Saw W/ Shuttle Feed (new 2000)

US $32,500.00

  • Hauppauge, New York, United States
  • Jan 30th
Open on mobile:
QR code
Preowned 21" x 30" COSEN Horizontal Band Saw, Model: C-7652NC, S/N 681053 (New 2000) Maximum capacity @ 90 degrees: round                                                            square                                                            rectangle Bundle capacity: width                              height Blade size Blade speeds, infinitely variable in two ranges      achieved by changing belt on step pulley Minimum cutting length, auto mode Automatic feed length, single stroke Automatic feed length, multiple stroke Work bed height 21" 21" x 21" 30" x 21" 9.05"-19.68" 6.5"-10.23" 229" long x 2" wide x .05" thick 66-328 F.P.M. 49-246 F.P.M. .47" 19.8" 255.9" 27.5" Equipped With Dual-column design Automatic hydraulic downfeed of cutting assembly with downfeed rate and cutting       pressure control dials (dual valves) Hydraulically actuated shuttle feed Full stroke hydraulically actuated cylinders for both front and rear vises Split front vise for work holding on both sides of the saw blade Operator's control panel with PLC for setting cutting length & number of cuts required      as well as digital display of blade speed Selector switches for Auto/Manual and Single/Bundle cutting modes of operation Hydraulically actuated bundling vises Hydraulically actuated blade tension and clamping with automatic blade breakage       detector (limit switch) and machine shut-off if blade is broken during operation Hydraulically actuated guide arm Hydraulically actuated chip conveyor Power driven steel wire blade brush with flexible drive shaft Interchangeable carbide blade guide Coolant system with 1/4 H.P. coolant pump motor Hydraulic system with 2 H.P. hydraulic pump motor 7.5 H.P.  blade drive motor with AC inverter drive Machine is wired for 460 volt operation (high voltage only) Approximate Weight: 8,360 Lbs. Approximate Dimensions: 128" L-R x 78" F-B x 85" H We Ship Worldwide - (F.O.B. Truck, Hauppauge - Long Island, NY)
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand COSEN
Model C-7652NC

Directions

Similar products from Tools for Saws & Cutting Machines

HE&M Saw Model: H160MDC, Abrasive, Cut Billet Matrial

HE&M Saw Model: H160MDC, Abrasive, Cut Billet Matrial

  • Watertown, Connecticut, United States
  • Jan 30th
USED DoAll Model 2013-V Vertical 20" Bandsaw

USED DoAll Model 2013-V Vertical 20" Bandsaw

  • Holland, Ohio, United States
  • Jan 30th
DOALL MODEL 2613-3 VERTICAL VARIABLE SPEED BAND SAW WITH DOALL BLADE WELDER

DOALL MODEL 2613-3 VERTICAL VARIABLE SPEED BAND SAW WITH DOALL BLADE WELDER

  • Santa Ana, California, United States
  • Jan 30th
HENDLEY & WHITMOORE 48'' X 1/4'' MECHANICAL INITIAL PINCH PLATE ROLL MODEL#7606

HENDLEY & WHITMOORE 48'' X 1/4'' MECHANICAL INITIAL PINCH PLATE ROLL MODEL#7606

  • Cedarburg, Wisconsin, United States
  • Jan 30th
Cosen model C-250NC Fully Programmable Automatic Band Saw

Cosen model C-250NC Fully Programmable Automatic Band Saw

  • Biddeford, Maine, United States
  • Jan 30th
DoAll C-916S 9" x 16" Horizontal Swivel Head Band Saw, Pneumatic Clamp/Lift

DoAll C-916S 9" x 16" Horizontal Swivel Head Band Saw, Pneumatic Clamp/Lift

  • Stone Mountain, Georgia, United States
  • Jan 30th
DOALL "ZEPHYR" MODEL ZW-3620 36'' VERTICAL BAND SAW

DOALL "ZEPHYR" MODEL ZW-3620 36'' VERTICAL BAND SAW

  • Cedarburg, Wisconsin, United States
  • Jan 30th
MEP 350MM 14" - 2 SPEED 800/1700 RPM MITRE CUTTING COLD SAW CONDOR 350, 220V 3ph

MEP 350MM 14" - 2 SPEED 800/1700 RPM MITRE CUTTING COLD SAW CONDOR 350, 220V 3ph

  • Cedarburg, Wisconsin, United States
  • Jan 30th
GROB VERTICAL BANDSAW W/ BUTT WELDER MDL# 4V-24

GROB VERTICAL BANDSAW W/ BUTT WELDER MDL# 4V-24

  • Cedarburg, Wisconsin, United States
  • Jan 30th
HEM MDL# 750A HORIZONTAL BAND SAW

HEM MDL# 750A HORIZONTAL BAND SAW

  • Cedarburg, Wisconsin, United States
  • Jan 30th
RIGID VERTICAL WOOD BAND SAW

RIGID VERTICAL WOOD BAND SAW

  • Odessa, Florida, United States
  • Jan 30th
20 inch Stone Machinery Manual Cut off Saw chop cutoff

20 inch Stone Machinery Manual Cut off Saw chop cutoff

  • Muskego, Wisconsin, United States
  • Jan 30th
Marvel Saw Gearbox With Pump 81A

Marvel Saw Gearbox With Pump 81A

  • Chula Vista, California, United States
  • Jan 30th
Marvel 15" x 20" Horizontal Bandsaw 15A4 M1 Complete

Marvel 15" x 20" Horizontal Bandsaw 15A4 M1 Complete

  • East Chicago, Indiana, United States
  • Jan 30th
Kysor Johnson KJ 10 Horizontal Band Saw (Inv.28092)

Kysor Johnson KJ 10 Horizontal Band Saw (Inv.28092)

  • Portland, Connecticut, United States
  • Jan 30th
THOMAS MOD250 Cold Cut Saw, Model 250A

THOMAS MOD250 Cold Cut Saw, Model 250A

  • Archbold, Ohio, United States
  • Jan 30th
Kaltenbach Mitre Type SKL Cold Saw With 16” Dia. Blade

Kaltenbach Mitre Type SKL Cold Saw With 16” Dia. Blade

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
REKORD Model 400 Automatic Grinder for HSS and Friction Circular Cold Saw Blades

REKORD Model 400 Automatic Grinder for HSS and Friction Circular Cold Saw Blades

  • Huntington Beach, California, United States
  • Jan 30th
Doall Vertical Band Saw 220v w/ Blade Welder, 24" x 24" Table

Doall Vertical Band Saw 220v w/ Blade Welder, 24" x 24" Table

  • Yonkers, New York, United States
  • Jan 30th
Gregori Bridge Saw, Impala

Gregori Bridge Saw, Impala

  • United States
  • Jan 30th

People who viewed this item also vieved

Quill Stop Knob w/ Screw For Bridgeport M Head Milling Machine, parts

Quill Stop Knob w/ Screw For Bridgeport M Head Milling Machine, parts

  • Ottawa, Illinois, United States
  • May 24th
Dividing Head; Hardinge; w/Plates (CTAM 9574)

Dividing Head; Hardinge; w/Plates (CTAM 9574)

  • Sicklerville, New Jersey, United States
  • May 24th
DoAll 3" x 6" x 1 1/4" Tin Coated Slab Milling Mill Cutter Large - Lot B

DoAll 3" x 6" x 1 1/4" Tin Coated Slab Milling Mill Cutter Large - Lot B

  • Woodruff, South Carolina, United States
  • May 24th
Atlas Craftsman 10" 12" Lathe Thread Dial 9-63

Atlas Craftsman 10" 12" Lathe Thread Dial 9-63

  • Youngstown, Ohio, United States
  • May 24th
Landis Thread Chaser Die UN 16 Pitch Land Matic Warner & Swasey Jones Landex

Landis Thread Chaser Die UN 16 Pitch Land Matic Warner & Swasey Jones Landex

  • Yorktown, Virginia, United States
  • May 24th
Southbend Metal Lathe Lead Screw Support Bracket 9" A B C With Screws Bolts

Southbend Metal Lathe Lead Screw Support Bracket 9" A B C With Screws Bolts

  • Yorktown, Virginia, United States
  • May 24th
THOMAS & BETTS/ANSLEY 779-2000 Hand Crimper

THOMAS & BETTS/ANSLEY 779-2000 Hand Crimper

  • New Berlin, Wisconsin, United States
  • May 27th
1981 Magerle Brothers Grinder / Model F10-R-S4

1981 Magerle Brothers Grinder / Model F10-R-S4

  • Ware, Massachusetts, United States
  • May 28th
Cuttermaster Professional CMX End Mill Sharpener

Cuttermaster Professional CMX End Mill Sharpener

  • Williston, Florida, United States
  • May 28th
TZ 2" 50mm Diamond Cut Off Disc Wheel Rotary Grinding Tool Fits for Dremel

TZ 2" 50mm Diamond Cut Off Disc Wheel Rotary Grinding Tool Fits for Dremel

  • Shenzhen, China
  • May 28th
AXE UP1437 Pro Cylinder Head Pressure Tester//Kwik Way/Sunnen

AXE UP1437 Pro Cylinder Head Pressure Tester//Kwik Way/Sunnen

  • Auburn, Washington, United States
  • May 28th
Winona Van Norman PH2000 Seat & Guide Machine/Kwik Way/Sunnen

Winona Van Norman PH2000 Seat & Guide Machine/Kwik Way/Sunnen

  • Auburn, Washington, United States
  • May 28th
Sandvik SYNCHROFlex 40 Rigid TAPPING CHUCK 393.2063-2540 117 w/ 3/4 & 5/8 Collet

Sandvik SYNCHROFlex 40 Rigid TAPPING CHUCK 393.2063-2540 117 w/ 3/4 & 5/8 Collet

  • New Philadelphia, Ohio, United States
  • May 29th
Helicoil 3/8-16 Thread Repair Kit 770-3046

Helicoil 3/8-16 Thread Repair Kit 770-3046

  • Huguenot, New York, United States
  • May 29th
(Lot of 4) Regal 1/4-20 H3 Drill-N-Tap Bit, 2F, HSS 007524AS - NEW

(Lot of 4) Regal 1/4-20 H3 Drill-N-Tap Bit, 2F, HSS 007524AS - NEW

  • Mount Pleasant, South Carolina, United States
  • May 29th
Hitachi EDM Machine Wire HBZ-K0.006 20 KG./6.62 Size 0.006" FREE SHIPPING **

Hitachi EDM Machine Wire HBZ-K0.006 20 KG./6.62 Size 0.006" FREE SHIPPING **

  • Saint Louis, Missouri, United States
  • May 30th
Charmilles 270 mm scale

Charmilles 270 mm scale

  • Anoka, Minnesota, United States
  • May 30th
Charmilles axis scale Heidenhain 4020 wire

Charmilles axis scale Heidenhain 4020 wire

  • Anoka, Minnesota, United States
  • May 30th
Black & Decker 8 Gauge Heavy Duty Nibbler No. 8 shear metal B&D cutter sheet

Black & Decker 8 Gauge Heavy Duty Nibbler No. 8 shear metal B&D cutter sheet

  • Farmington, Missouri, United States
  • May 31st
#9711: Roper Whitney 10' x 14ga Apron Brake

#9711: Roper Whitney 10' x 14ga Apron Brake

  • Orange City, Iowa, United States
  • May 31st
MODERN MACHINE TOOL CO. 3L TUBE CUT OFF MACHINE

MODERN MACHINE TOOL CO. 3L TUBE CUT OFF MACHINE

  • Aurora, Indiana, United States
  • May 31st
Sunnen Hone MBB1650-JIC S/N 50770 3 Ph. Motor Wired 480VAC lots LOTs of TOOLING

Sunnen Hone MBB1650-JIC S/N 50770 3 Ph. Motor Wired 480VAC lots LOTs of TOOLING

  • Louisville, Kentucky, United States
  • Jun 1st
Sunnen Mandrel BAL20-744LA with Wedge

Sunnen Mandrel BAL20-744LA with Wedge

  • Halls, Tennessee, United States
  • Jun 1st
Sunnen Wedge , 2H-R28

Sunnen Wedge , 2H-R28

  • Halls, Tennessee, United States
  • Jun 1st
THREAD ROLLS DETROIT 3/8-16 UNC

THREAD ROLLS DETROIT 3/8-16 UNC

  • Churchville, New York, United States
  • Jun 5th
9/16" D GEOMETRIC DIE HEAD W/ 11 SETS OF CHASERS DIES NICE LOT

9/16" D GEOMETRIC DIE HEAD W/ 11 SETS OF CHASERS DIES NICE LOT

  • Dickson City, Pennsylvania, United States
  • Jun 5th
3 pc Conomatic Screw Machine Form Tools & Roller Rest 1-1/2" Wide Dovetail Mount

3 pc Conomatic Screw Machine Form Tools & Roller Rest 1-1/2" Wide Dovetail Mount

  • Lorain, Ohio, United States
  • Jun 5th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies