+ Post new Ad
C - CLAMP No. 6 USA Heavy, 6" Capacity used tool Clamp, US $240 – Picture 0
C - CLAMP No. 6 USA Heavy, 6" Capacity used tool Clamp, US $240 – Picture 1
C - CLAMP No. 6 USA Heavy, 6" Capacity used tool Clamp, US $240 – Picture 2
C - CLAMP No. 6 USA Heavy, 6" Capacity used tool Clamp, US $240 – Picture 0
C - CLAMP No. 6 USA Heavy, 6" Capacity used tool Clamp, US $240 – Picture 1
C - CLAMP No. 6 USA Heavy, 6" Capacity used tool Clamp, US $240 – Picture 2

C - Clamp No. 6 Usa Heavy, 6" Capacity Used Tool Clamp

US $240

  • Long Beach, California, United States
  • Jan 30th
Open on mobile:
QR code
This antique Clamp  has a 6" Capacity , with a 4" Throat Has minor surface rust.  Screws smooth, tight, and true. Weight is about 3 pounds.Very Good Condition, Ready for work.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture United States
Brand Unknown Marked 6

Directions

Similar products from Clips & Jaws

Williams No. 2" Vulcan Heavy Duty Bridge C-Clamp FREE SHIPPING

Williams No. 2" Vulcan Heavy Duty Bridge C-Clamp FREE SHIPPING

  • Cornell, Illinois, United States
  • Jan 30th
Wilton 106 6" Heavy Duty Bridge C-Clamp FREE SHIPPING

Wilton 106 6" Heavy Duty Bridge C-Clamp FREE SHIPPING

  • Cornell, Illinois, United States
  • Jan 30th
CLAMP MFG KANT-TWIST 410 3" T-HANDLE CLAMP MACHINISTS CLAMP NEW/UNUSED

CLAMP MFG KANT-TWIST 410 3" T-HANDLE CLAMP MACHINISTS CLAMP NEW/UNUSED

  • Burbank, California, United States
  • Jan 30th
Armstrong No. 4" Heavy Duty Bridge C-Clamp, Shows Torch Marks FREE SHIPPING

Armstrong No. 4" Heavy Duty Bridge C-Clamp, Shows Torch Marks FREE SHIPPING

  • Cornell, Illinois, United States
  • Jan 30th
Vintage Heavy Duty 12" x 6" Jorgensen C-Clamp No. 806 Metal Working Woodworking

Vintage Heavy Duty 12" x 6" Jorgensen C-Clamp No. 806 Metal Working Woodworking

  • Hesperia, California, United States
  • Jan 30th
MACHINIST LATHE TOOLS LOT OF 2 CLAMPS #6F & #3F KANT TWIST CLAMP FOR HOLD DOWN

MACHINIST LATHE TOOLS LOT OF 2 CLAMPS #6F & #3F KANT TWIST CLAMP FOR HOLD DOWN

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
MACHINIST LATHE TOOL UNUSUAL LARGE SET UP FIXTURE w CLAMPING SYSTEM #605

MACHINIST LATHE TOOL UNUSUAL LARGE SET UP FIXTURE w CLAMPING SYSTEM #605

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
WESTARD C-CLAMP

WESTARD C-CLAMP

  • Saint Louis, Missouri, United States
  • Jan 30th
Armstrong C Clamp 78-118 19" Throat

Armstrong C Clamp 78-118 19" Throat

  • Etowah, Tennessee, United States
  • Jan 30th
(2) Starrett # 161A Parallel Clamps 1 1/4 ” in box lot # 4

(2) Starrett # 161A Parallel Clamps 1 1/4 ” in box lot # 4

  • Janesville, Wisconsin, United States
  • Jan 30th
NEW LOT OF 4 mitee bite 750 mach uniforce clamp PN 60075

NEW LOT OF 4 mitee bite 750 mach uniforce clamp PN 60075

  • Willowbrook, Illinois, United States
  • Jan 30th
8 Piece Butt Welding Clamps

8 Piece Butt Welding Clamps

  • Winona, Missouri, United States
  • Jan 30th
(4) BULLARD VTL Vertical Turret Lathe TOP JAWS / TABLE CLAMPS

(4) BULLARD VTL Vertical Turret Lathe TOP JAWS / TABLE CLAMPS

  • New Britain, Connecticut, United States
  • Jan 30th
DESTACO Model 245U U-Bar Flanged Base Clamp De-Sta-Co USED.

DESTACO Model 245U U-Bar Flanged Base Clamp De-Sta-Co USED.

  • Sellersburg, Indiana, United States
  • Jan 30th
Parallel Clamps, (2) Vintage Machinist / Toolmaker Parallel Clamps

Parallel Clamps, (2) Vintage Machinist / Toolmaker Parallel Clamps

  • Saunderstown, Rhode Island, United States
  • Jan 30th
2 Large Used Vintage Machinists Parallel Camp Parts 6 inches long

2 Large Used Vintage Machinists Parallel Camp Parts 6 inches long

  • Malden, Massachusetts, United States
  • Jan 30th
Irwin 2025102 Adjustable Iron C-Clamp-2-1/2X1-3/8 C-CLAMP

Irwin 2025102 Adjustable Iron C-Clamp-2-1/2X1-3/8 C-CLAMP

  • Brooklyn, New York, United States
  • Jan 30th
2 Vintage C Clamp Tool Wilton 12" Heavy Duty 412 Drop Forged Steel Machinist USA

2 Vintage C Clamp Tool Wilton 12" Heavy Duty 412 Drop Forged Steel Machinist USA

  • Hoopeston, Illinois, United States
  • Jan 30th
Destaco Clamp 207- U

Destaco Clamp 207- U

  • United States
  • Jan 30th
5 pcs New Hand Tool Toggle Clamp 201A Horizontal Clamp 60lbs 201-A SD-201-A

5 pcs New Hand Tool Toggle Clamp 201A Horizontal Clamp 60lbs 201-A SD-201-A

  • United States
  • Jan 30th

People who viewed this item also vieved

Hardinge expanding collet 16c #600 with large collet 4.053" lathe machining

Hardinge expanding collet 16c #600 with large collet 4.053" lathe machining

  • Niagara Falls, New York, United States
  • Mar 12th
Metal lathe collet closer with collets

Metal lathe collet closer with collets

  • Otto, North Carolina, United States
  • Mar 12th
Caterpillar Collet 8R3935 New

Caterpillar Collet 8R3935 New

  • Ely, Nevada, United States
  • Mar 12th
Multi- Holding Fixture Angle Plate

Multi- Holding Fixture Angle Plate

  • Lakewood, California, United States
  • May 1st
MAGNA-SINE MAGNETIC COMPOUND SINE PLATE

MAGNA-SINE MAGNETIC COMPOUND SINE PLATE

  • Lombard, Illinois, United States
  • May 2nd
HARDINGE C24-D FIXTURE BACK PLATE

HARDINGE C24-D FIXTURE BACK PLATE

  • Prospect Heights, Illinois, United States
  • May 3rd
8" 3 JAW 2 PIECE HARD REV SEMI-STEEL PLAIN BACK SCROLL MANUAL LATHE CHUCK "NEW"

8" 3 JAW 2 PIECE HARD REV SEMI-STEEL PLAIN BACK SCROLL MANUAL LATHE CHUCK "NEW"

  • Natick, Massachusetts, United States
  • May 21st
Bison 8" 3 Jaw self centering Lathe Chuck

Bison 8" 3 Jaw self centering Lathe Chuck

  • Springville, Tennessee, United States
  • May 21st
Aluminum Jaws

Aluminum Jaws

  • Chino, California, United States
  • May 21st
L2649- Vintage WILTON VISE NO. 594 with original box

L2649- Vintage WILTON VISE NO. 594 with original box

  • Annville, Pennsylvania, United States
  • May 22nd
VINTAGE REED Mfg Co 403-1/2 VISE SWIVEL JAW BENCH VISE

VINTAGE REED Mfg Co 403-1/2 VISE SWIVEL JAW BENCH VISE

  • Shreveport, Louisiana, United States
  • May 23rd
Vibtage Wilton Vise

Vibtage Wilton Vise

  • Menifee, California, United States
  • May 23rd
ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8'' Morse Taper: 3 MT

ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8'' Morse Taper: 3 MT

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 1.231''

ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 1.231''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Oversized Carbide Point Dead Center - TAPER: 4 MT

ROYAL Oversized Carbide Point Dead Center - TAPER: 4 MT

  • Duncan, South Carolina, United States
  • May 24th
HYDRA-LOCK CORP. AC-46921-S2 COLLET PART # 1702-726 MADE IN USA

HYDRA-LOCK CORP. AC-46921-S2 COLLET PART # 1702-726 MADE IN USA

  • Ontario, Canada
  • May 31st
Magne Tool Demagnetizer DM-3

Magne Tool Demagnetizer DM-3

  • Arcanum, Ohio, United States
  • May 31st
J H WILLIAMS 2020S CUT OFF TOOL HOLDER w/ BLADE Lathe Atlas South Bend Craftsman

J H WILLIAMS 2020S CUT OFF TOOL HOLDER w/ BLADE Lathe Atlas South Bend Craftsman

  • Bristol, Connecticut, United States
  • May 31st
ACER VU-300 Universal Tilting Rotary Table

ACER VU-300 Universal Tilting Rotary Table

  • Fullerton, California, United States
  • Jun 3rd
Haas TRT 210 CNC 4th 5th Axis Rotary Table Indexer Brush 17 Pin HRT 210 160

Haas TRT 210 CNC 4th 5th Axis Rotary Table Indexer Brush 17 Pin HRT 210 160

  • Schaumburg, Illinois, United States
  • Jun 3rd
Societe Genevoise Rotary Table Needs cleaned Tilting Rotary table

Societe Genevoise Rotary Table Needs cleaned Tilting Rotary table

  • Oregon, Ohio, United States
  • Jun 4th
Vintage Set of (4) Picador Packing Blox (Made in England) Fig. 205/6 mechinist

Vintage Set of (4) Picador Packing Blox (Made in England) Fig. 205/6 mechinist

  • Laurel, Maryland, United States
  • Jun 4th
VEKTEK 05-02 10081505 CLAMP Hold Down Hydraulic Cylinder clamping unit Tool

VEKTEK 05-02 10081505 CLAMP Hold Down Hydraulic Cylinder clamping unit Tool

  • Grand Rapids, Michigan, United States
  • Jun 4th
10 PAIR PARALLEL SET 1/8 X 6 INCH (1/2 TO 1-5/8 RANGE) (3900-3010)

10 PAIR PARALLEL SET 1/8 X 6 INCH (1/2 TO 1-5/8 RANGE) (3900-3010)

  • Chino, California, United States
  • Jun 4th
RARE SJOGREN (HARDINGE) 5C SPEED CHUCK COLLET 1-1/2 x 8 TPI South Bend Craftsman

RARE SJOGREN (HARDINGE) 5C SPEED CHUCK COLLET 1-1/2 x 8 TPI South Bend Craftsman

  • Huntington Beach, California, United States
  • Jun 9th
Kennametal TG100 Collet Chuck KM50TSTG100110M - KM50TS Shank

Kennametal TG100 Collet Chuck KM50TSTG100110M - KM50TS Shank

  • Mount Pleasant, South Carolina, United States
  • Jun 9th
Jacobs rubber flex collet chuck Model 50 LO taper spindle mount

Jacobs rubber flex collet chuck Model 50 LO taper spindle mount

  • Addison, Illinois, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies