C-t7-h High Precision Transistor Tester 1.8 Inches Capacitance Meter + Cable Kit

US $22.84

  • ShenZhen, China
  • Aug 30th
Home Arduino Module Sensor Chips About Us TC-T7-H Features: 1. Automatic detection of zener diode 0.01-20V.  2. Self-test with automatic calibration. 3. Support infrared coding. 4. Infrared waveform display. 5. Infrared receiving instructions. 6. The measurement results are displayed by TFT graphic. 7. A key operation. 8. Automatic shutdown (timeout setting). 9. Built-in high capacity rechargeable lithium ion battery. 10. Lithium ion battery voltage detection. Specification: Condition:100% Brand New Color: As Pictures Shown Capacitor: 25pF-100mF Resistor: 0.01-50MΩ Inductor: 0.01mH-20H Battery: 0.1-4.5V  Package list:  1 x Transistor tester 1 x USB cable. 1 x Red and yellow green contact wires 2 x capacitance   LCR-T7 Description: - 160x128 TFT display - Multi function key - Transistor test area - Zener Diode test area - IR receiver window - Micro USB Charging Interface - Charge indicator LED Features: TFT graphic display Multifunction Tester. Transistor Tester - Automatic detection of zener diode 0.01-30V - Self test with automatic calibration IR decoder - Support Hitachi IR coding - IR waveform display - Infrared receiving instruction Other - Measure results using TFT graphic display (160x128) - a key operation - Automatic shut-off (Settable Timeout) -built-in High-capacity rechargeable Li-Ion battery - Detection of the voltage of the Li-ion-160x128 tft battery - Transistor test area - Zener diode test area - IR receiver window - Micro USB Charging Interface - LED charge indicator - Chinese and English support Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source! Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions! Operating Instructions 1.1 Key operational definitions Multi-function key has two actions: l Short press: Press the key and not less than 10 ms, release key within 1.5 seconds l Long press: Press the key more than 1.5 seconds 1.2 Power on In the power off state, short press the multifunction key, the tester is turned on and automatically measured. l Power on & measurement interface 1.3 Detect transistor In the power off state or the test is completed, put the test element into the transistor test area of test seat, and press the locking handle, short press the multifunction key, the tester automatically measure, graphical display of measurement results when testing is complete. Warning: Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on! Warning: We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged! l Component placement Test seat are divided into transistors and zener diode test area, detailed in 1.1 Description. l No, unknown, or damaged part Package Included: 1 Set  LCR-T7 TFT Transistor Tester   Payment Shipping Refund Payment We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right. Payment must be received in 5 business days of auction closing. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. Shipping Fill your shipping info Refund All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund. If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded
Herstellungsland und -region China
MPN Does not apply
Marke Markenlos
UPC Does not apply
Produktart Transistor Tester
EAN Does not apply
Anzeige Digital
Herstellernummer nicht zutreffend

Directions

Similar products from Inductance, Capacitance, Resistance and Impendace Meters & Analyzers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies