Camfive Std 80w (peak 90w) Co2 Laser Tube For Laser Cutter Engraver Machines

US $319.00

  • Orlando, Florida, United States
  • Jun 9th
CAMFive CFLT-STD 80W CO2 LASER TUBE FOR LASER CUTTER AND ENGRAVER MACHINES BRAND NEW CAMFive CFLT-STD 80W CO2 LASER TUBE CO2 LASER TECHNICAL PARAMETERs Length: 63" (1.60 meters) Diameter: 2.38" (60.45 mm) Output power: 80W Operating voltage: 20KV Operating current: 20 MA Work lifetime: Up to 4,500 hrs depending on use and power   Power supply:  (20KV) Our CAMFive CFLT-STD 80W CO2 laser tube is used for laser engraving and cutting machines and is a replacement for machines using 20KV  power supplies and a water cooling system.  Working Principle: high-pressure discharge stimulates high pressure, if necessary, eyewear is essential. Laser Status: Laser power will be attenuated when the laser tube is used at a certain time; if the laser is pink, it is in normal condition; if the laser is white, and it means the laser power is attenuate. (Laser tube is consumable, please change it for a new one when it can’t meet demand due to attenuation.) Laser Positioning: 1? There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube; 2?On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power. Please contact us for different laser machines brands. We have all kinds of spare parts for many laser machines.  Bid only includes cables, not connectors, please inquire if you need to purchase them.  

Directions

Similar products from Etching

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies