+ Post new Ad
Cantek 10' Sliding Table Saw #P305 (230 or 575/3/60), US $8,360.00 – Picture 0
Cantek 10' Sliding Table Saw #P305 (230 or 575/3/60), US $8,360.00 – Picture 0

Cantek 10' Sliding Table Saw #p305 (230 Or 575/3/60)

US $8,360.00

  • Blaine, Washington, United States
  • Jul 20th
Open on mobile:
QR code
Features 5 HP main motor with 1HP scoring motor 10 precision anodized aluminum sliding table travels on ball bearings which run on hardened steel guide strips 14 maximum main blade diameter Solid cast iron main table which is precision ground Solid rip fence runs on precision round cylindrical guide and is equipped with manual fine adjustment and locking lever 51 rip capacity Optional overhead saw blade guard included (CE-type) with built in dust port Manual blade rise / fall& tilting with blade angle indicator Convenient manual scoring adjustment Eccentric hold down clamp & wedge for solid wood ripping included Extendable outrigger arm supports crosscut fence assembly Aluminum extruded crosscut fence with two flip stops with dual metric and inch rulers Available in 3-phase and 1-phase electrics Specs Cast iron fixed table dimension 1500 x 1726mm Sliding table dimension 3200 x 360mm Max. main saw blade diameter 305 / 355mm Max Main saw bore 30mm Max. cutting height with blade at 90o 90 / 115mm Max. cutting height with blade at 45o 63 / 81mm Main motor power 5 HP Main blade speed 4000 RPM Scoring saw blade 120 mm Scoring saw blade bore 20 mm. Scoring blade motor power 1 HP Scoring blade speed 8000 RPM Blade tilt 0 – 45o Max. ripping width 1300mm Dust collection ports (1) 100mm / (1) 60mm Machine weight 990 lbs. (450 kgs) Machine shipping weight 1210 lbs. (550 kgs) Machine shipping dimensions 83” x 43 ” x 44” (2090x1100x1120mm) Sliding table weight 176 lbs. (80 kgs) Sliding table shipping weight 227 lbs. (103 kgs) Sliding table shipping dimensions 130” x 17” x 9” (3300x430x220mm) Total weight of machine 1166 lbs. (530 kgs)
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN Does Not Apply
Brand Cantek
Country/Region of Manufacture Taiwan
Equipment Type Woodworking

Directions

Similar products from Other Woodworking Equipment & Machines

Air Systems Wet/Dry Vac Cleaner Car Cyclone Dust Collector Separator Kit Filter

Air Systems Wet/Dry Vac Cleaner Car Cyclone Dust Collector Separator Kit Filter

  • Mouscron, Belgium
  • Jul 21st
ABN Abrasive Paper 5pc Sand Paper Variety Pack with Dispenser ndash 150 240 320

ABN Abrasive Paper 5pc Sand Paper Variety Pack with Dispenser ndash 150 240 320

  • USA, United States
  • Jul 21st
holzher 1402 hf edgebander

holzher 1402 hf edgebander

  • Dandridge, Tennessee, United States
  • Jul 21st
High Efficiency Cyclonic Dust Separator, 12 in. Dia with 2.5 in. hose, 36 in. 2

High Efficiency Cyclonic Dust Separator, 12 in. Dia with 2.5 in. hose, 36 in. 2

  • Defiance, Ohio, United States
  • Jul 21st
H3D cutters Herco and 3-D Diamond set 8 1-02-1053000 Jumpmill trimmers

H3D cutters Herco and 3-D Diamond set 8 1-02-1053000 Jumpmill trimmers

  • Hartford, Wisconsin, United States
  • Jul 21st
Walker Turner 20" Vintage Pedestal Drill Press Mill/Drill 208-460V 1Hp

Walker Turner 20" Vintage Pedestal Drill Press Mill/Drill 208-460V 1Hp

  • Chicago, Illinois, United States
  • Jul 21st
Used Evans 62" Hot Roll Panel Laminator Press

Used Evans 62" Hot Roll Panel Laminator Press

  • Borden, Indiana, United States
  • Jul 20th
Powermatic Shaper Model 26 (Woodworking Machinery)

Powermatic Shaper Model 26 (Woodworking Machinery)

  • Woodbine, Maryland, United States
  • Jul 20th
Bandsaw Woodcutting 24”

Bandsaw Woodcutting 24”

  • Greenville, Pennsylvania, United States
  • Jul 20th
Woodstock W1007 4-Inch Blast Gate for Use with Vacuum/Dust Collectors

Woodstock W1007 4-Inch Blast Gate for Use with Vacuum/Dust Collectors

  • Multiple US Locations, United States
  • Jul 20th
Pistorius Double Bladed Miter saw for picture frames

Pistorius Double Bladed Miter saw for picture frames

  • Twin Falls, Idaho, United States
  • Jul 20th
Dust Deputy Anti-Static Cyclone Separator (DD DIY)

Dust Deputy Anti-Static Cyclone Separator (DD DIY)

  • Toms River, New Jersey, United States
  • Jul 20th
Trend CSB/BW45A 1-1/4 Inch Diameter Craft Bush Washer 5/8 Inch Bore

Trend CSB/BW45A 1-1/4 Inch Diameter Craft Bush Washer 5/8 Inch Bore

  • Joliet, Illinois, United States
  • Jul 20th
Axminster Saw Blade Reducing Bush- 1-1/4 Inch to 5/8 Inch

Axminster Saw Blade Reducing Bush- 1-1/4 Inch to 5/8 Inch

  • Joliet, Illinois, United States
  • Jul 20th
Mar-Bel Laminate Slitter LS-1

Mar-Bel Laminate Slitter LS-1

  • Chino Hills, California, United States
  • Jul 20th
delta 15-342

delta 15-342

  • Dandridge, Tennessee, United States
  • Jul 20th
woodworking tools used Delta Heavy Duty Wood Shaper. Local Pick Up Only.

woodworking tools used Delta Heavy Duty Wood Shaper. Local Pick Up Only.

  • Fort Mill, South Carolina, United States
  • Jul 20th
DYNABRADE 11253 Contact Arm Assembly

DYNABRADE 11253 Contact Arm Assembly

  • Buffalo Grove, Illinois, United States
  • Jul 19th
Mirka 105GVBD Backup Pad

Mirka 105GVBD Backup Pad

  • Madison, Mississippi, United States
  • Jul 19th
Delta Wood Shaper

Delta Wood Shaper

  • North Aurora, Illinois, United States
  • Jul 19th

People who viewed this item also vieved

POWERMATIC DRILL PRESS 1150 PARTS DRILL PRESS DEPTH CONTROL ROD/SCALE

POWERMATIC DRILL PRESS 1150 PARTS DRILL PRESS DEPTH CONTROL ROD/SCALE

  • Oceanport, New Jersey, United States
  • Jan 30th
POWERMATIC DRILL PRESS 1150 PARTS

POWERMATIC DRILL PRESS 1150 PARTS

  • Oceanport, New Jersey, United States
  • Jan 30th
SOUTH BEND IBARMIA DRILLS HEAVY DUTY 5.5 H.P 31.5" SWING GEAR HEAD DRILL PRESS.

SOUTH BEND IBARMIA DRILLS HEAVY DUTY 5.5 H.P 31.5" SWING GEAR HEAD DRILL PRESS.

  • Santa Ana, California, United States
  • Jan 30th
8 Piece Heavy Duty Triple Tempered Wood Lathe Turning Tool Kit Free U.S. Ship

8 Piece Heavy Duty Triple Tempered Wood Lathe Turning Tool Kit Free U.S. Ship

  • Lakeland, Florida, United States
  • Jan 30th
LATHE, HARDINGE SPEED LATHE, W/SOME EXTRA COLLETS, REF.#5127

LATHE, HARDINGE SPEED LATHE, W/SOME EXTRA COLLETS, REF.#5127

  • Warminster, Pennsylvania, United States
  • Jan 30th
Lathe, Traub Model TD26 Horizontal Lathe, W/Vibe Hopper, REF.#4926

Lathe, Traub Model TD26 Horizontal Lathe, W/Vibe Hopper, REF.#4926

  • Warminster, Pennsylvania, United States
  • Jan 30th
Nr. 577 3D MODEL RELIEF STL VECTRIC RLF ARTCAM MODEL FOR CNC ROUTER MILL

Nr. 577 3D MODEL RELIEF STL VECTRIC RLF ARTCAM MODEL FOR CNC ROUTER MILL

  • Vilnius, Lithuania
  • Jan 30th
1307 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

1307 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

  • United States
  • Jan 30th
Betterley router bit change wrenches set of two,center guide 1/2 inch, manual

Betterley router bit change wrenches set of two,center guide 1/2 inch, manual

  • Nicosia , Cyprus
  • Jan 30th
KALAMAZOO INDUSTRIES 2" x 48" VERTICAL / HORIZONTAL BELT SANDER NEW 2FSM

KALAMAZOO INDUSTRIES 2" x 48" VERTICAL / HORIZONTAL BELT SANDER NEW 2FSM

  • Fennville, Michigan, United States
  • Jan 30th
Seco 36" (37") Belt Sander model SK-3760A

Seco 36" (37") Belt Sander model SK-3760A

  • Bentley, Louisiana, United States
  • Jan 30th
BEAUTIFUL ROCKWELL-DELTA 6" BELT 12" DISC SANDER 1 1/2 HP 220 3 PH VIDEO LOOK

BEAUTIFUL ROCKWELL-DELTA 6" BELT 12" DISC SANDER 1 1/2 HP 220 3 PH VIDEO LOOK

  • Seekonk, Massachusetts, United States
  • Jan 30th
Powermatic 66 10" table saw 28" x 21" table 3 phase

Powermatic 66 10" table saw 28" x 21" table 3 phase

  • Millville, New Jersey, United States
  • Jan 30th
Powermatic 66 10" Table saw 28" x 71 1/2" table, 3 phase

Powermatic 66 10" Table saw 28" x 71 1/2" table, 3 phase

  • Millville, New Jersey, United States
  • Jan 30th
SCMI sliding panel saw

SCMI sliding panel saw

  • Georgetown, Massachusetts, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies