+ Post new Ad
CARBIDE TIPPED DRILL 17/32 (.5312) STRAIGHT SHANK LONG, US $26.00 – Picture 0
CARBIDE TIPPED DRILL 17/32 (.5312) STRAIGHT SHANK LONG, US $26.00 – Picture 0

Carbide Tipped Drill 17/32 (.5312) Straight Shank Long

US $26.00

  • North Tonawanda, New York, United States
  • Jan 30th
Open on mobile:
QR code
DRILL CONDITION = NEW DRILL MATERIAL = CARBIDE TIPPED  BRAZED IN A HIGH SPEED STEEL (HSS)  BODY CARBIDE TIPPED DRILLS USED FOR DRILLING OF CAST IRON, NON FERROUS METALS, COMPOSITES, PLASTICS AND NON  METALS DRILL MANUFACTURER = AARO CARBIDE (USA)  DRILL SIZE = 17/32" (.5312) DRILL HELIX ANGLE = REGULAR SPIRAL DRILL FLUTE LENGTH = 6-1/2" DRILL OVERALL LENGTH = 10" SURFACE TREATMENT = POLISHED DRILL POINT = 118 DEGREE POINT  (NOT SPLIT) NOTE:  THERE IS A TANG ON THE SHANK OF THE DRILL,  REFERRED TO AS AN AUTOMOTIVE TANG   YOUR COST = 26.00 TAPER LENGTH DRILLS HAVE APPROXIMATELY THE SAME FLUTE LENGTHS AND OVERALL LENGTHS AS TAPER SHANK DRILLS, FOR DEEPER HOLE DRILLING.  SHANKS ARE THE SAME DIAMETER AS THE DRILL BODY.  RECOMMENDED FOR DRILLING A WIDE RANGE OF MATERIALS.THE SHANK DIAMETER IS THE SAME AS THE DRILL DIAMETER P/N 498-034XL   Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand AARO CARBIDE
MPN MC-714-000-63
Model DRILL CARBIDE TIPPED
Country/Region of Manufacture United States
Country of Manufacture United States

Directions

Similar products from Extended Length Drills

19/64" Split Point 12" Aircraft Extension Drills

19/64" Split Point 12" Aircraft Extension Drills

  • Elgin, Illinois, United States
  • Jan 30th
23/64" Split Point 12" Aircraft Extension Drills PTD

23/64" Split Point 12" Aircraft Extension Drills PTD

  • Elgin, Illinois, United States
  • Jan 30th
9/32 Extension Drill Bit, Rock River Tool 261018

9/32 Extension Drill Bit, Rock River Tool 261018

  • Ridgeville, South Carolina, United States
  • Jan 30th
11/64 Extension Drill Bit, Rock River Tool 261011

11/64 Extension Drill Bit, Rock River Tool 261011

  • Ridgeville, South Carolina, United States
  • Jan 30th
Extra length aircraft drill HSS 8.75 MM x 9 3/4 long

Extra length aircraft drill HSS 8.75 MM x 9 3/4 long

  • Warren, Michigan, United States
  • Jan 30th
TAPER LENGTH DRILL 6.3MM COBALT GUHRING NEW UNUSED BLACK OXIDE $5.50

TAPER LENGTH DRILL 6.3MM COBALT GUHRING NEW UNUSED BLACK OXIDE $5.50

  • North Tonawanda, New York, United States
  • Jan 30th
Kennametal Extra Length HSS Drills Assorted Sizes [4 only]

Kennametal Extra Length HSS Drills Assorted Sizes [4 only]

  • Surrey, British Columbia, Canada
  • Jan 30th
#21 6" Extension Length Cobalt Drill Bit - USA - NEW

#21 6" Extension Length Cobalt Drill Bit - USA - NEW

  • United States
  • Jan 30th
#30 6" Extension Length Cobalt Drill Bit - USA - NEW

#30 6" Extension Length Cobalt Drill Bit - USA - NEW

  • United States
  • Jan 30th
#10 6" Extension Length Cobalt Drill Bit - USA - NEW

#10 6" Extension Length Cobalt Drill Bit - USA - NEW

  • United States
  • Jan 30th
HAYDEN 5708 8" Longboy Drill Cobalt SS Qty 12 NEW F3

HAYDEN 5708 8" Longboy Drill Cobalt SS Qty 12 NEW F3

  • Saint Louis, Missouri, United States
  • Jan 30th
NATIONAL 13/32" Taper Length Drill Bit HS USA Quality

NATIONAL 13/32" Taper Length Drill Bit HS USA Quality

  • Denver, Colorado, United States
  • Jan 30th
NATIONAL 15/32" Taper Length Drill Bit HSS USA Quality

NATIONAL 15/32" Taper Length Drill Bit HSS USA Quality

  • Denver, Colorado, United States
  • Jan 30th
DRILL TAPER LENGTH HIGH SPEED 5/32" DIAMETER {.1562"} BLACK OX USA NEW $2.25

DRILL TAPER LENGTH HIGH SPEED 5/32" DIAMETER {.1562"} BLACK OX USA NEW $2.25

  • North Tonawanda, New York, United States
  • Jan 30th
TAPER LENGTH DRILL HIGH SPEED (.2500") 1/4" DIAMETER BLACK OXIDE NEW USA $2.75

TAPER LENGTH DRILL HIGH SPEED (.2500") 1/4" DIAMETER BLACK OXIDE NEW USA $2.75

  • North Tonawanda, New York, United States
  • Jan 30th
TAPER LENGTH DRILL HIGH SPEED (.3594") 23/64" USA BLACK OXIDE NEW $3.25

TAPER LENGTH DRILL HIGH SPEED (.3594") 23/64" USA BLACK OXIDE NEW $3.25

  • North Tonawanda, New York, United States
  • Jan 30th
DRILL TAPER LENGTH HIGH SPEED (.6562) 21/32 BLACK OXIDE

DRILL TAPER LENGTH HIGH SPEED (.6562) 21/32 BLACK OXIDE

  • North Tonawanda, New York, United States
  • Jan 30th
12 NEW BESLY TAPER LENGTH DRILLS #10 .1935 HSS USA 179

12 NEW BESLY TAPER LENGTH DRILLS #10 .1935 HSS USA 179

  • Tekamah, Nebraska, United States
  • Jan 30th
Ceveland Twist Drills (Y) Clev-Forged Special ~ TOTAL OF 12 PIECES ~ .404 Dia!

Ceveland Twist Drills (Y) Clev-Forged Special ~ TOTAL OF 12 PIECES ~ .404 Dia!

  • Plainville, Connecticut, United States
  • Jan 30th
Cleveland Twist Drills (X) Clev-Forged Special ~ TOTAL OF 12 PIECES ~ .397 Dia

Cleveland Twist Drills (X) Clev-Forged Special ~ TOTAL OF 12 PIECES ~ .397 Dia

  • Plainville, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

21 LASSCO PAPER DRILL BITS 1/8" - NEW OLD STOCK

21 LASSCO PAPER DRILL BITS 1/8" - NEW OLD STOCK

  • Helena, Montana, United States
  • Feb 15th
ASSORTED LOT OF DRILL BITS

ASSORTED LOT OF DRILL BITS

  • Norwalk, California, United States
  • Feb 15th
Chicago-Latrobe HSS GP 7/8 Drill

Chicago-Latrobe HSS GP 7/8 Drill

  • Rehoboth Beach, Delaware, United States
  • Feb 16th
Garr 8.5mm 90660 Solid Carbide 3 flute drills New

Garr 8.5mm 90660 Solid Carbide 3 flute drills New

  • Fairview, Pennsylvania, United States
  • Feb 28th
Lot 29-Solid Carbide Drill Bits-Size #23-#39 Cutting Bits-New Old Stock-#32 Unk

Lot 29-Solid Carbide Drill Bits-Size #23-#39 Cutting Bits-New Old Stock-#32 Unk

  • Carlsbad, California, United States
  • Feb 28th
Superion .3125 Double Margin Solid Carbide Drill BD.3125

Superion .3125 Double Margin Solid Carbide Drill BD.3125

  • Fairview, Pennsylvania, United States
  • Feb 28th
Nachi drill bits twelve Nachi-Fujikoshi corp. list 601 regular shank 5/8 Tool

Nachi drill bits twelve Nachi-Fujikoshi corp. list 601 regular shank 5/8 Tool

  • United States
  • Mar 2nd
LOT OF 4 HSS HEAVY DUTY 4MT TWIST DRILLS 1-5/32" TO 1-3/8" PTD MORSE

LOT OF 4 HSS HEAVY DUTY 4MT TWIST DRILLS 1-5/32" TO 1-3/8" PTD MORSE

  • Ellington, New York, United States
  • Mar 2nd
LOT OF 5 HSS HEAVY DUTY 4MT MORSE TWIST DRILLS 1-5/64" TO 1-1/2"

LOT OF 5 HSS HEAVY DUTY 4MT MORSE TWIST DRILLS 1-5/64" TO 1-1/2"

  • Ellington, New York, United States
  • Mar 2nd
ZCC-CT 1.750" Indexable Drill 3xD Coolant Fed (ZTD03-1.750"-XP1.50"-SP14-02)

ZCC-CT 1.750" Indexable Drill 3xD Coolant Fed (ZTD03-1.750"-XP1.50"-SP14-02)

  • Round Lake, Illinois, United States
  • Mar 4th
ZCC-CT 1.500" Indexable Drill 3xD Coolant Fed (ZTD03-1.500"-XP1.50"-SP11-02)

ZCC-CT 1.500" Indexable Drill 3xD Coolant Fed (ZTD03-1.500"-XP1.50"-SP11-02)

  • Round Lake, Illinois, United States
  • Mar 4th
Kennametal METCUT .750" Indexable Drill 4.5xD Coolant Fed (273-5075)

Kennametal METCUT .750" Indexable Drill 4.5xD Coolant Fed (273-5075)

  • Round Lake, Illinois, United States
  • Mar 4th
"CLEVELAND" Twist Drill Bits #2 Size Lot of 10 Pcs

"CLEVELAND" Twist Drill Bits #2 Size Lot of 10 Pcs

  • Coventry, Rhode Island, United States
  • Mar 9th
"ATM" Twist Drill Bits # 47 Lot of 4 Pcs

"ATM" Twist Drill Bits # 47 Lot of 4 Pcs

  • Coventry, Rhode Island, United States
  • Mar 9th
"ATM" Twist Drill Bits # 74 Lot of 12 Pcs

"ATM" Twist Drill Bits # 74 Lot of 12 Pcs

  • Coventry, Rhode Island, United States
  • Mar 9th
CJT -Screw Machine Length Drill Bit Size (mm): 23.81-Made in USA

CJT -Screw Machine Length Drill Bit Size (mm): 23.81-Made in USA

  • Cottleville, Missouri, United States
  • May 24th
YG1 Stub Drills 3.1mm HSS TiN 130D 18mm LOC x 50mm OAL DJ543031 QTY 2 <2027>

YG1 Stub Drills 3.1mm HSS TiN 130D 18mm LOC x 50mm OAL DJ543031 QTY 2 <2027>

  • Saint Louis, Missouri, United States
  • May 24th
Precision Twist Drill Bits Lot of 3 Screw Machine Length Size R (R42C)

Precision Twist Drill Bits Lot of 3 Screw Machine Length Size R (R42C)

  • Saint Mary, Missouri, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies