Carlo Gavazzi EDM35 panel meter 115VAC power, 600VAC input 2 relays out FREE SH, US $149.00 – Picture 0

Carlo Gavazzi EDM35 panel meter 115VAC power, 600VAC input 2 relays out FREE SH, US $149.00 – Picture 1

Carlo Gavazzi EDM35 panel meter 115VAC power, 600VAC input 2 relays out FREE SH, US $149.00 – Picture 2

Carlo Gavazzi Edm35 Panel Meter 115vac Power, 600vac Input 2 Relays Out Free Sh

US $149.00

Westchester, Illinois, United States
Mar 2nd

Open on mobile:
QR code

The EDM series 35 is based on a modular concept consisting of a main unit and plug-in modules. The concept provides the meter with high flexibility and versatility. The offer of input-, output- and power supply modules makes it possible to configure the meter to suit most applications. Furthermore, the modular concept ensures that the stock costs are minimized. Features The main features of the EDM series 35 are: - Modularity - Continuous measurement and monitoring of the analog signal of the input variable - Continuous monitoring of the measured value for exceeding the programmed setpoint values - Setpoints individually programmable: Value, hysteresis, high/low alarm, time delay - Separate programming of each output relay: energized/deenergized and status in overflow condition - Additional software functions: scaling, data hold and peak/valley - Input modules for measuring voltage (AC or DC), current (AC or DC), resistance, temperature (Pt 100 or thermocouple J or K), frequency or revolutions per minute - Output modules with 1 or 2 relays or with analogue output (4 - 20 mA, 0 - 20 mA, 0 - 10 V) - Power Supply modules for AC or DC supply as well as excitation supply for sensor supply - Interface to Carlo Gavazzi’s Dupline® Field and Installation Bus The modules are parted into 3 categories: Power supply modules, input modules and output modules. Each module is dedicated to its own function or input variable. To minimize the number of modules many input modules are designed to cover all ranges. If you want to change the input range just press the locking tabs and pull out the module to change a jumper position, reinstall the jumper and reprogram the range selection. If you change the range from low to high level or vice versa it might be necessary for you to use other terminal positions as well. The input modules are available with terminals for program lock to protect against unauthorized admittance. Display 3 1/2 digit (max. read-out 1999). Alphanumeric indication of: - Measured value - Programming parameters Alarm Indicators Indicates when an alarm condition occurs. “1” indicates alarm condition when a 1-relay output module is used (= 1 set point). “1” and “2” indicate alarm condition when a 2-relay output module is used (= 2 set points). Engineering Unit Interchangeable unit label. A set of engineering unit labels is supplied with the EDM. The engineering unit has to be inserted by the customer. Please buy with confidence. Satisfaction guaranteed!!! If not fully satisfied, for any reason, just ship back the item and full refund will be issued immediately. Thanks For Looking!

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Brand

Carlo Gavazzi