Carving Duplicator... Furniture, Stocks, Propellers, Cello Necks

US $3800

Belen, New Mexico, United States
May 24th

Open on mobile:
QR code

RADARCARVE.NET -VISA, Mastercard, Paypal accepted- 505-948-0571 We're happy to answer any questions, feel free to call CARVING DUPLICATOR Model One This is an amazing tool that will allow you to carve identical pieces from an original, and do it efficiently and quickly. Made of welded steel construction, it is extremely rigid and stable... and built for a lifetime of use. This machine will carve objects up to 8 inches in diameter, and any length desired. Length can be easily extended! Ball bearing guides move effortlessly on steel shafts while a router fitted with a carbide bit does the cutting. A nylon tipped guide pin follows the contour of the original with surprising ease. A wonderful addition to fine hand craftsmanship, this duplicator will allow you to cut a duplicate from a blank block of wood that needs only a final sanding to be finished. Accuracy within .005 inch can be achieved. The pictures include that of a Hawken rifle stock that was duplicated in walnut. Simply a wonderful tool for the hands-on person who wants to do his own work. The turning mechanism allows for the rotation of the workpieces a full 360 degrees, in unison, then they can be locked solidly in position for carving with the twist of a knob. Cutting can be done in three dimensions effortlessly. Setup is accomplished in a matter of minutes on your own table... a piece of 3/4" plywood is fine. Comes with cutting bits, guide pins, instructions... All you need to supply is the table or plywood to mount the mechanism and the router and you can start carving. WE DO NOT SUPPLY THE ROUTER. The Bosch Colt router is priced at about $99, and can be purchased locally. Will carve objects up to 34" , with the standard length side rails, and this can be easily extended up to 7 Ft. with the construction of a simple sliding center panel of plywood (plans are included). A handle is lightly held by the operator and the cutting bit follows the detail of the original exactly while the operator makes passes back and forth (or side to side) to remove excess wood. Simple manual operation allows you to proceed at your own speed. Cutting bits are easily changed to suit the carving. A selection of carbide bits come with the machine, each one with a matching guide pin. The Duplicator is very easy to operate and very forgiving... you just can't make mistakes if you take it at a moderate pace. The best feature is that this duplicator will carve an unlimited number of items. Will carve new pistol grips superbly. Gunstocks, both rifle and shotgun, furniture parts, Ball and Claw chair legs, Guitar necks, architectural millwork, virtually anything that will fit within the dimensions of 8" diameter can be duplicated. Need a Duplicator to handle wider items up to 16" wide, or even wider? See our 'Model Two' on our website. This is not a lightweight hobby tool, but rather a superbly built machine for serious production work on a wide range of carved wood items. Comes with a LIFETIME Warranty. Usually ships within a few days. Want to ask some questions in person? Please call the shop at 505-948-0571, and we'd be happy to talk about your needs and answer any questions. Shipping Worldwide $295 INTERNATIONAL BUYERS please email for special requirements and shipping costs, or see our website, radarcarve.net for special international options.